IoT Firmware Websocket "freezes" on frame segmentation at TCP level about esp8266 HOT 7 CLOSED

Issue found with a project using http://wslay.sourceforge.net/ for websocket framing

from esp8266.

Thank you for collaboration! I just committed a fix without be able to reproduce exact situation. Can you please test it in your environment and tell me if it works.

Regards,
Peter

from esp8266.

My current firmware update tab says "current: user2.bin " and "boot: v2 normal" I'm not sure if I can update both userX.bin and which boot.bin should I use .. there is no v2 in your bin directory

from esp8266.

If on Firmware Update tab Current says user2.bin you should upload firmware for user1.bin which is _user1.2048.new.3.bin_ located in bin/upgrade folder

and vice versa

If Current says user1.bin you should upload user2.bin which is _user2.2048.new.3.bin_ located in same folder

from esp8266.

I'm unable update the firmware .. after just few 1.4k packets exchanged the network traffic fails to resends and no nothing happens :(

from esp8266.

Also non websocket update seems to succeed but the web-page does not reconnect back fully - some of the request get responded some get 404 but no other tabs except "ESP Connection" appears :(

from esp8266.

If over the air firmware update fails you can update it with serial cable.

from esp8266.