How to make it run in VS 2019? - getting LIBUSB_ERROR_NOT_SUPPORTED about ofxkinectv2 HOT 5 CLOSED

Did you try updating the driver on the kinect using zadig as described in the Read Me?

from ofxkinectv2.

Thanks for your response! I'm getting this error while having already updated the driver with zagid. It appears that the update has been successful, at least as far as I can figure out by the "Reinstall driver" rather than "Replace driver" text on the button when selecting the libusbK (v3.0.7.0) driver.

from ofxkinectv2.

Hmm, that seems correct. I had trouble with some usb ports, I had to try several different USB3 ports before it registered properly. Have you restarted and tried unplugging and then plugging in the kinect? I just downloaded the latest release of OF from the site and this addon, built the kinectV2 example with the project generator and it worked for me. Maybe you need to use Visual Studio 2017?

from ofxkinectv2.

@maximoskp - Make sure you uncheck Ignore Hubs or Composite Parents.
Then select XBOX Nui Sensor from the list to install libusbK driver.

from ofxkinectv2.

Thank you @eulphean - this did the trick for me! No error messages now and all screens show as expected in the demo. Thanks a million :)

from ofxkinectv2.