Comments (6)
Hi @lucifer1004 , I'm not able to reproduce this:
ld/
I have no name!@f9a8be5fb819:/repro/cmake_sample_project/build$ cmake ..
-- Found CUDAToolkit: /usr/local/cuda/include (found suitable version "12.2.140", minimum required is "11.5")
-- Using GPU architectures 70
CMake Warning (dev) at MatX/public/cpm-cmake/cmake/CPM.cmake:36 (message):
CPM: A dependency is using a more recent CPM version
(1.0.0-development-version) than the current project (0.32.2). It is
recommended to upgrade CPM to the most recent version. See
https://github.com/cpm-cmake/CPM.cmake for more information.
Call Stack (most recent call first):
MatX/CMakeLists.txt:89 (include)
This warning is for project developers. Use -Wno-dev to suppress it.
-- Found CUDAToolkit: /usr/local/cuda/include (found version "12.2.140")
-- Need CCCL. Finding...
-- CPM: adding package [email protected] (v2.2.0)
-- Found libcudacxx: /repro/cmake_sample_project/build/_deps/cccl-src/libcudacxx/lib/cmake/libcudacxx/libcudacxx-config.cmake (found suitable version "2.2.0.0", minimum required is "2.2.0.0")
-- Found Thrust: /repro/cmake_sample_project/build/_deps/cccl-src/thrust/thrust/cmake/thrust-config.cmake (found suitable exact version "2.2.0.0")
-- Found CUB: /repro/cmake_sample_project/build/_deps/cccl-src/cub/cub/cmake/cub-config.cmake (found suitable version "2.2.0.0", minimum required is "2.2.0.0")
-- Found CCCL: /repro/cmake_sample_project/build/_deps/cccl-src/lib/cmake/cccl/cccl-config.cmake (found version "2.2.0.0")
-- Enabling pybind11 support
-- CPM: adding package [email protected] (v2.6.2)
-- pybind11 v2.6.2
CMake Warning (dev) at /usr/local/share/cmake-3.23/Modules/CMakeDependentOption.cmake:89 (message):
Policy CMP0127 is not set: cmake_dependent_option() supports full Condition
Syntax. Run "cmake --help-policy CMP0127" for policy details. Use the
cmake_policy command to set the policy and suppress this warning.
Call Stack (most recent call first):
build/_deps/pybind11-src/CMakeLists.txt:98 (cmake_dependent_option)
This warning is for project developers. Use -Wno-dev to suppress it.
-- checking python import module numpy
-- checking python import module cupy
-- Configuring done
-- Generating done
-- Build files have been written to: /repro/cmake_sample_project/build
I have no name!@f9a8be5fb819:/repro/cmake_sample_project/build$ make -j VERBOSE=1
/usr/local/bin/cmake -S/repro/cmake_sample_project -B/repro/cmake_sample_project/build --check-build-system CMakeFiles/Makefile.cmake 0
/usr/local/bin/cmake -E cmake_progress_start /repro/cmake_sample_project/build/CMakeFiles /repro/cmake_sample_project/build//CMakeFiles/progress.marks
make -f CMakeFiles/Makefile2 all
make[1]: Entering directory '/repro/cmake_sample_project/build'
make -f CMakeFiles/sample_matx.dir/build.make CMakeFiles/sample_matx.dir/depend
make[2]: Entering directory '/repro/cmake_sample_project/build'
cd /repro/cmake_sample_project/build && /usr/local/bin/cmake -E cmake_depends "Unix Makefiles" /repro/cmake_sample_project /repro/cmake_sample_project /repro/cmake_sample_project/build /repro/cmake_sample_project/build /repro/cmake_sample_project/build/CMakeFiles/sample_matx.dir/DependInfo.cmake --color=
Dependencies file "CMakeFiles/sample_matx.dir/main.cu.o.d" is newer than depends file "/repro/cmake_sample_project/build/CMakeFiles/sample_matx.dir/compiler_depend.internal".
Consolidate compiler generated dependencies of target sample_matx
make[2]: Leaving directory '/repro/cmake_sample_project/build'
make -f CMakeFiles/sample_matx.dir/build.make CMakeFiles/sample_matx.dir/build
make[2]: Entering directory '/repro/cmake_sample_project/build'
[ 50%] Building CUDA object CMakeFiles/sample_matx.dir/main.cu.o
/usr/local/cuda/bin/nvcc -forward-unknown-to-host-compiler -DINDEX_64_BIT -DMATX_DISABLE_CUB_CACHE=1 -DMATX_ENABLE_CUTENSOR=0 -DMATX_ENABLE_CUTLASS=0 -DMATX_ENABLE_FILEIO=1 -DMATX_ENABLE_PYBIND11=1 -DMATX_ENABLE_VIZ=0 -I/repro/cmake_sample_project/MatX/include -I/repro/cmake_sample_project/MatX/include/matx/kernels -isystem=/repro/cmake_sample_project/build/_deps/cccl-src/libcudacxx/include -isystem=/repro/cmake_sample_project/build/_deps/cccl-src/cub -isystem=/repro/cmake_sample_project/build/_deps/cccl-src/thrust -isystem=/repro/cmake_sample_project/build/_deps/pybind11-src/include -isystem=/usr/include/python3.10 -isystem=/usr/local/cuda/include -O3 -DNDEBUG --generate-code=arch=compute_70,code=[compute_70,sm_70] --expt-relaxed-constexpr -DMATX_ROOT=\"/repro/cmake_sample_project/MatX\" -fvisibility=hidden -std=c++17 -MD -MT CMakeFiles/sample_matx.dir/main.cu.o -MF CMakeFiles/sample_matx.dir/main.cu.o.d -x cu -c /repro/cmake_sample_project/main.cu -o CMakeFiles/sample_matx.dir/main.cu.o
[100%] Linking CUDA executable sample_matx
/usr/local/bin/cmake -E cmake_link_script CMakeFiles/sample_matx.dir/link.txt --verbose=1
/usr/bin/g++ CMakeFiles/sample_matx.dir/main.cu.o -o sample_matx /usr/lib/x86_64-linux-gnu/libpython3.10.so /usr/local/cuda/lib64/libcudart.so /usr/local/cuda/lib64/libcublasLt.so /usr/local/cuda/lib64/libcufft.so /usr/local/cuda/lib64/libcusolver.so /usr/local/cuda/lib64/libcublas.so /usr/local/cuda/lib64/libcusparse.so /usr/lib/x86_64-linux-gnu/libcuda.so /usr/local/cuda/lib64/libcurand.so /usr/local/cuda/lib64/libnvToolsExt.so -lcudadevrt -lcudart_static -lrt -lpthread -ldl -L"/usr/local/cuda/targets/x86_64-linux/lib/stubs" -L"/usr/local/cuda/targets/x86_64-linux/lib"
make[2]: Leaving directory '/repro/cmake_sample_project/build'
[100%] Built target sample_matx
make[1]: Leaving directory '/repro/cmake_sample_project/build'
/usr/local/bin/cmake -E cmake_progress_start /repro/cmake_sample_project/build/CMakeFiles 0
Have you tried using set
inside the cmake script rather than passing the variable in?
Do you maybe have a
from matx.
This seems related to the Python version.
I ran into this issue when using Python 3.12, and reproduced it with Python 3.11. However, Python 3.10 is OK.
from matx.
I'm able to reproduce an issue under Ubuntu 22.04 with python 3.11 side-loaded, but not the same issue:
sudo apt update
sudo apt install software-properties-common
sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt update
sudo apt install python3.11
examples/cmake_sample_project/build$ cmake -DMATX_EN_PYBIND11=ON -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python3.11 ..
...
-- Found PythonInterp: /usr/bin/python3.11 (found version "3.11.8")
-- Found PythonLibs: python3.11
-- Performing Test HAS_FLTO
-- Performing Test HAS_FLTO - Success
CMake Error at /usr/local/share/cmake-3.23/Modules/FindPackageHandleStandardArgs.cmake:230 (message):
Could NOT find Python3 (missing: Python3_INCLUDE_DIRS Python3_LIBRARIES
Development Development.Module Development.Embed) (found version "3.11.8")
Call Stack (most recent call first):
/usr/local/share/cmake-3.23/Modules/FindPackageHandleStandardArgs.cmake:594 (_FPHSA_FAILURE_MESSAGE)
/usr/local/share/cmake-3.23/Modules/FindPython/Support.cmake:3181 (find_package_handle_standard_args)
/usr/local/share/cmake-3.23/Modules/FindPython3.cmake:490 (include)
MatX/CMakeLists.txt:209 (find_package)
I might just have cmake/python3.11 configured incorrectly.
from matx.
Able to recreate with Ubuntu 22.04 with python3.11 side-loaded and paths properly configured:
sudo apt update
sudo apt install software-properties-common
sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt update
sudo apt install -y python3.11 python3.11-dev
python3.11 -m pip install numpy cupy
examples/cmake_sample_project/build$ cmake -DMATX_EN_PYBIND11=ON -DPYTHON_EXECUTABLE=/usr/bin/python3.11 -DPYTHON_LIBRARIES=/usr/lib/python3.11 -DPYTHON_INCLUDE_DIRS=/usr/include/python3.11 ..
examples/cmake_sample_project/build$ make
...
Consolidate compiler generated dependencies of target sample_matx
[ 50%] Building CUDA object CMakeFiles/sample_matx.dir/main.cu.o
/nfs/scratch.timothym_ate_1/MatX2/examples/cmake_sample_project/build/_deps/pybind11-src/include/pybind11/cast.h(446): error: pointer to incomplete class type "_frame" is not allowed
" " + handle(frame->f_code->co_filename).cast<std::string>() +
...
from matx.
Root cause is old pybyind11 version (v2.6.2) not compatible with python3.11+. Suggest upgrade to pybind11 v2.12.0.
from matx.
Fixed by #604. Closing.
from matx.
Related Issues (20)
- [QST] How to get the underlying array of a tensor? HOT 1
- [QST] Somewhat cryptic error message when finding tensor norm. HOT 3
- [FEA] Convert `any`/`all` to use thrust's `any_of` and `all_of`
- [FEA] Indexing one tensor with another tensor HOT 12
- [QST] Subtracting one tensor from another with different shape HOT 6
- [FEA] Better error messages with incompatible matrix sizes HOT 1
- [QST] Composing operators HOT 21
- [FEA] Better error messages when allocating memory
- [QST] MatX is around x15 slower than CuPy for the same task HOT 55
- [DOC] Add detailed descriptions of memory space options
- [BUG] update CUB Cache
- [FEA] add argminmax function
- [FEA] Support UINT random generation with API
- [FEA] Add Normalize function
- [FEA] Add argsort function
- [BUG] ‘::rsqrt’ has not been declared when building MatX HOT 1
- [BUG] Less than operator doesn't seem to work HOT 2
- [BUG] Building docs too aggressive with recursive folder searching
- [QST] How to use the `sort` function? HOT 1
- [QST] How to multiply two random tensors together? HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from matx.