After 5-10 sec leds are out of sync and stop working about systematic-leds HOT 4 CLOSED

On Thu, Mar 29, 2018, 14:04 Yariv ***@***.***> wrote: I flashed the esp8266 with upload speed of 57600, connected the data pin to D5 pin which is 4 pins left to the RX1 pin (worth to add this commend somewhere...) when starting the python application all the leds turned off and start getting signals from the python application. using the following : #define NUM_LEDS 100 #define DATA_PIN 5 //#define CLOCK_PIN 2 #define CHIPSET WS2812B #define COLOR_ORDER GRB The led stip itself is bigger the 100 leds but was tested it with only 100 leds. using WS2812B led strip. is there a way to get the output of the esp8266 device to see if there some errors? @not-matt <https://github.com/not-matt> Can you please confirm that the setup it right? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#29>, or mute the thread <https://github.com/notifications/unsubscribe-auth/Ae5azNoXVZNxthB7SYCJqDFD9LXppXkwks5tjNvogaJpZM4S_1mf> .