Add sensor for voltage from charger about easee_hass HOT 5 CLOSED

Hi! Maybe I'm missing something, but isn't the voltage sensor what you're asking for?

from easee_hass.

I'd be happy to act as tester in this if someone is willing to do the coding part!

from easee_hass.

Sorry, I did miss that! Case closed, this is exactly what I was looking for. Thanks a lot for the good work!

from easee_hass.

Just to clearify for future readers of this post. It seem that the paramters state_inVoltageT2T3,state_inVoltageT2T4 and state_inVoltageT2T5 corresponds to the reading for L1, L2 and L3 in the easee cloud app. It is not clear to me what the other readings is actually meassuring.

from easee_hass.

To my understanding T in Easee nomencalture here is Terminal. The Easee box has five terminals and each voltage is then between terminals as specified by the number in its name. What is what will depend on your network system (IT, TT, TN) and if it is one-phase or three-phase. Terminal 1 is always ground (PE).

See Easee manual here for more info. In my case I have IT 1-phase, so you see T1T2 and T1T3 are phase voltages (i.e. phase-to-ground) of approx 230V / sqrt(3) ~ 133V while T2T3 is my line voltage (i.e. phase-to-phase) of approx 230V. In a 400V TN 3-phase system which is more common you'll see approx 400V between T3T4, T3T5 and T4T5 while you will see approx 400V / sqrt(3) ~ 230V on T2T3, T2T4 and T2T5.

from easee_hass.