network error while running the script about vm HOT 11 CLOSED

What output do you get from cat /etc/network/interfaces and ifconfig?

And thanks for reporting!

from vm.

ping @cketan

from vm.

Hi, thanks for reply i have changed the auto ip to manual ip and tried to re-run the script and its worked :)

from vm.

But still, if it didn't work with auto IP what was the issue so that I can solve it?

from vm.

i have installed the pre-build VM on hyper-v, VM has taken auto IP as 192.168.1.108 and windows server has assigned the IP in Virtual network as 192.168.1.102 due to both system miss configuration VM has unable to connect to internet then I have assign the manual IP in VM as 192.168.1.102 then it is able to access the Internet.

from vm.

Ok, so it got an IP, then there isn't a problem with the VM then. Good to know anyway. :)

from vm.

Try to set it manually in /etc/network/interfaces and remove "bash ip.sh"
from both nextcloud_install_production.sh and nextcloud-startup-script.sh

Then run the install script.

Op vr 26 aug. 2016 10:03 schreef stuffedmonkey [email protected]:

I have the same problem kind of. The interface ens33 tries to find a dhcp
server on network 192.168.2.1, at least thats what it looks like. My
gateway is 192.168.1.1 tho. Not really familiar with interface
configuration in ubuntu and kind of stuck without network =)

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
#14 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AM4oQGA4IcclQ6LKGGcZ2Dhy3j1BLUxtks5qjp3RgaJpZM4JFZqf
.

Met vriendelijke groet,

E. Holm

from vm.

Ok. Where do i find nextcloud_install_production.sh?
Cant seem to find it when running searches...

from vm.

Its in /var/scripts

Op vr 26 aug. 2016 18:01 schreef stuffedmonkey [email protected]:

Ok. Where do i find nextcloud_install_production.sh?

—
You are receiving this because you commented.

Reply to this email directly, view it on GitHub
#14 (comment), or mute
the thread
https://github.com/notifications/unsubscribe-auth/AM4oQAZx0SfjAyvt--xUVP5DBNieaULCks5qjw3bgaJpZM4JFZqf
.

Met vriendelijke groet,

E. Holm

from vm.

@ezraholm50 negative. In that folder I only have history, instruction, nextcloud_startup and setup_secure....

from vm.

Once you run the first setup, the install script gets deleted.

Enable DHCP in your router and make sure your hypervisor is set to bridged mode, download the VM again and start over.

from vm.