Network Broken/Device needs regular reboots after update to NAMF-2020-44 about namf HOT 8 OPEN

I have exactly same problem since last update - KIT BME 0.3.3 PRO.
@netmaniac

from namf.

Same problem with my NAM KIT BME 0.3.3 PRO. With the latest firmware, device works max 2-3 days from reboot, then it becomes not visible in WiFi network.

from namf.

Hello,
I'm sorry for delay in response. Regarding issue - can be device pinged when it stops reporting? (on Windows cmd key + r, type cmd, enter, when window opens type in ping IP_ADDRESS_OF_SENSOR).

Blue led on Wemos - due to choices made by Luftdaten I2C pins are shared with pin where LED is attached. So blinking LED is related to I2C communication (BME sensor for) not network activity.

I'll prepare info how sensor can be downgraded.

from namf.

Re: can be device pinged when it stops reporting? - No, device is not responding to ping requests

from namf.

I have just released new beta software, which allows to rollback version. If You want to use older NAMF version proceed as follows:

• change updated channel to beta (Advanced config tab), save & restart - autopupdate has to be enabled
• wait 30-60 seconds - sensor should boot with NAMF-2020-45rc1
• now visit IP_OF_THE_SENSOR/rollback - You will have option to select older firmware version (currently only EN or PL fw)

After saving sensor will restart and update to older FW version. Autoupdate will disabled. If You want to upgrade to current version just re-enable autoupdate & change update channel back to stable.

Please report if downgrade have fixed that problem with sensor accessibility.

from namf.

Hi, thanks for preparing downgrading feature. I've made an downgrade to v43. So far it looks fine.

from namf.

I was able to enable the network watchdog - that is making the situation also stable for me.

from namf.