[Controller Request]: Steelseries Nimbus+ about missioncontrol HOT 8 OPEN

This might just need to have a new vendor/product id whitelisted. Can you update your post to include these values? Since the controller paired, you can grab them with my btdb tool

from missioncontrol.

@ndeadly

Error Code: 2021-0003 (0x615)
Program: 0104444444444000
Firmware: 17.0.1 (Atmosphère 1.6.2-master-f7bf379cf)
An error has occurred.
Please press the POWER Button to restart the console normally, or a VOL button
restate te console no the POWER Butson est 12 seconds to tum the console off.
If the problem persists, refer to the Nintendo Support Website.
support.nintendo.com/switch/error
General Purpose Registers
...

from missioncontrol.

Why are you sharing this? That title id has nothing to do with Mission Control, and without context sharing an error report for a controller request makes no sense.

from missioncontrol.

@ndeadly Hi. Sorry, I didn't write details... When I try to run the btdb tool I get the fatal error.
I found the error report log. Or do you need a dump?

Atmosphère Fatal Report (v1.1):
Result: 0x615 (2021-0003)

Program ID: 0104444444444000
Process Name: Homebrew Me
Firmware: 17.0.1 (Atmosphère 1.6.2-master-f7bf379cf)
General Purpose Registers:
Start Address: 0000000000000000
Stack Trace:
ReturnAddress[00]: 0000000000000000
ReturnAddress[01]: 0000000000000000
ReturnAddress[02]: 0000000000000000
ReturnAddress[03]: 0000000000000000
ReturnAddress[04]: 0000000000000000
ReturnAddress[05]: 0000000000000000
ReturnAddress[06]: 0000000000000000
ReturnAddress[07]: 0000000000000000
ReturnAddress[08]: 0000000000000000
ReturnAddress[09]: 0000000000000000
ReturnAddress[10]: 0000000000000000
ReturnAddress[11]: 0000000000000000
ReturnAddress[12]: 0000000000000000
ReturnAddress[13]: 0000000000000000
ReturnAddress[14]: 0000000000000000
ReturnAddress[15]: 0000000000000000
ReturnAddress[16]: 0000000000000000
ReturnAddress[17]: 0000000000000000
ReturnAddress[18]: 0000000000000000
ReturnAddress[19]: 0000000000000000
ReturnAddress[20]: 0000000000000000
ReturnAddress[21]: 0000000000000000
ReturnAddress[22]: 0000000000000000
ReturnAddress[23]: 0000000000000000
ReturnAddress[24]: 0000000000000000
ReturnAddress[25]: 0000000000000000
ReturnAddress[26]: 0000000000000000
ReturnAddress[27]: 0000000000000000
ReturnAddress[28]: 0000000000000000
ReturnAddress[29]: 0000000000000000
ReturnAddress[30]: 0000000000000000
ReturnAddress[31]: 0000000000000000

from missioncontrol.

Error 0x615 is sm: too many sessions. Presumably this is because of the reduced number of btm sessions from firmware 17.0.0 onwards. I wasn't able to reproduce on latest firmware, but try disabling Mission Control and/or other homebrew sysmodules before running btdb and see whether you still get the error.

from missioncontrol.

@ndeadly btdb starts when I disable Mission Control

from missioncontrol.

Yeah, thought that would be the case. I guess I will have to move the functionality used by btdb into the mission control sysmodule and access it via that instead.

Now that it's working I need you to share the vendor and product ID displayed in btdb. It's the number in the format XXXX:XXXX. Or you can just upload a screenshot.

from missioncontrol.

@ndeadly

from missioncontrol.