Low hashrate on GTX 1060 6 GB about claymore-dual-miner HOT 9 CLOSED

Hi!

I get a bad hashrate on nanopool.org while mining ETH too.
I have the same GPU and my hashrate is 15 MH/s and 650 MH/s on sia in dual mode.

If i mine to ethminer.org i get 23.4 MH/s.

Nanopool.org (ETH - SIA)

from claymore-dual-miner.

the default -dcri is 30.
try to decrease it should work.
I set dcri to 14 and finally get 24M eth and 340M SC

from claymore-dual-miner.

I'm mining ETH and SA on an R9 290, imo the optimal -dcri on this card is 22.

Clocks 1090 core / 1250 memory

I get 30.6 MH/s ETH and 670 MH/s SA.

from claymore-dual-miner.

ric7705, thank you, but not work :(

from claymore-dual-miner.

s3v3ns, this problem regardless of the pool. When using ethminer, the result is the same.

from claymore-dual-miner.

Same here with a GTX 970. I used ethminer before which had the same problems (among recent others) but could deliver 18MH/s by using driver 347.88 - with that driver claymore cannot find a CUDA-GPU though. So I installed recent 382.53 and am back to 3MH/s with a really broken system-performance. Nvidia Setting to "optimize for compute performance" does not work - claymore "cannot allocate big buffer" that way. Help would be very welcome!

from claymore-dual-miner.

Thanks to all. Solved the problem by installing Windows 7

from claymore-dual-miner.

Hi have 6 GTX 1060 too and my hashrate is at 22mh/s for each and i have the last Nvidia driver
Sometimes it's a problem with the OC, but i need to said dual mining didnt work well for the tuple claymore/win10/GTX1060.

from claymore-dual-miner.

Out of the 4 Zotac GTX 1060 6GB I have, only one underperforms at 19MH/s (OC). Found out it was due to DDR5 used is Hynix and not Samsung. Samsung DDR5 give 23.5 MH/s. Quite sad though and I can't exchange the card.

from claymore-dual-miner.