Comments (16)
FYI, I upgraded to v .91 a few weeks ago and the CAT and transmit audio seem to be working fine with the R1CBU alternate firmware. I believe that was also the case with the stock Xiegu firmware.
Hello, Using FT8CN with usb cable has no TX issues. My problem is related to WLAN connection from Android to X6100, where FT8CN connects wirelessly to WFserver on X6100. I am not using USB cable as X6100 is draining power from Android phone battery, this is a flaw (or feature) of USB OTG connectivity Thats why I desperately wait for FT8CN and X6100 to communicate wirelessly
请耐心,XIEGU的新固件一定会支持FT8CN+WLAN的。期待x6100新固件的发布。
from ft8cn.
hi, @djbr1
谢谢您提供的信息!我已经把此消息提供给XIEGU,希望能够有帮助!
谢谢!
bg7yoz
from ft8cn.
I'm having the same problem, no transmit audio, using X6100 fw v1.1.6 with FT8CN v.90. Going to try a factory reset. If that fails I'll reluctantly reflash with v1.1.7, fingers crossed.
from ft8cn.
Update:
Remaining on FT8CN v.90 I performed a factory reset which resulted in no change.
I flashed the radio with the new FW 1.1.7 (8/31/23), performed a factory reset as suggested here, and that solved the issue.
I think I'll stay with v.90 for the time being. If it ain't broke no more, don't fix it.
from ft8cn.
Update:
Remaining on FT8CN v.90 I performed a factory reset which resulted in no change. I flashed the radio with the new FW 1.1.7 (8/31/23), performed a factory reset as suggested here, and that solved the issue. I think I'll stay with v.90 for the time being. If it ain't broke no more, don't fix it.
建议使用0.91,因为0.91解决了一些已知的问题。
bg7yoz
from ft8cn.
I read the v.91 release notes and will probably update.
Thanks for commenting and for this excellent app.
from ft8cn.
hi, @djbr1 , @Rafltdcpa
关于XIEGU X6100在FT8CN使用网络模式无发射音频的问题,已经查到了问题的原因了:
是X6100固件的一个bug:在L-DIG和U-DIG模式切换时,音频路径选择出了问题。
这个bug已经反映给XIEGU,XIEGU已经针对这个问题做了改正。相信在XIEGU新的固件发布后,会解决此问题。
73!
bg7yoz
from ft8cn.
FYI, I upgraded to v .91 a few weeks ago and the CAT and transmit audio seem to be working fine with the R1CBU alternate firmware. I believe that was also the case with the stock Xiegu firmware.
from ft8cn.
FYI, I upgraded to v .91 a few weeks ago and the CAT and transmit audio seem to be working fine with the R1CBU alternate firmware. I believe that was also the case with the stock Xiegu firmware.
Hello,
Using FT8CN with usb cable has no TX issues. My problem is related to WLAN connection from Android to X6100, where FT8CN connects wirelessly to WFserver on X6100.
I am not using USB cable as X6100 is draining power from Android phone battery, this is a flaw (or feature) of USB OTG connectivity
Thats why I desperately wait for FT8CN and X6100 to communicate wirelessly
from ft8cn.
from ft8cn.
With regard to the draining of the phone battery see the pic attached. I'm using a Samsung Note 8 which has a usb C port. The splitter is a usb C male to usb A female/usb A female. This allows for CAT control and the simulcharging of the phone.
from ft8cn.
Typo correction....the splitter is usb C male to usb A female/ usb C female ( not usb A).
from ft8cn.
Hello,
I also have split OTG cable. It provides power to phone, however it does not prevent X6100 from draining from phone :(
BTW, it is X6100 behaviour with all attached devices (laptop, PC), approx 100-200 mA are drained from attached USB.
If you have current meter on your power supply, you can notice the difference in consumption when USB is attached or not
73 HB9TXB
NB: you can join discord server where x6100 is dissected past two years ( https://discord.gg/VD4AsYJH )
from ft8cn.
The power supply I use is just a simple 12v/10amp wall brick with no indicators so if there is a current drain I haven't noticed it. The phone always reflects a battery charge of 100%.
I would be curious to know if, when you used the X6100 with the usb cable and experienced the phone current drain, if the radio was using external power or battery power and, if battery power, was the charger set to on or off.
from ft8cn.
Hi @Rafltdcpa
I made measurement from my 12V/30A power supply, ampermeter precision is 0.1
laptop connected USB | laptop disconnected USB | |
---|---|---|
radio settings charge on | 0.3 A | 0.5 A |
radio settings charge off | 0.2 A | 0.4 A |
Drain of 0.2 A from USB is visible in all scenarios
As I do not have ampermeter for USB cables, it was not possible to measure drain when X6100 runs on battery
73
from ft8cn.
Hi @bg7yoz
If you have contact with Xiegu developers, please ask when new FW will be released.
thanks
请耐心,XIEGU的新固件一定会支持FT8CN+WLAN的。期待x6100新固件的发布。
from ft8cn.
Related Issues (20)
- Feature request: Allow transmission to start part-way through a cycle
- Ft8cn locks up with yaesu ft-710
- Insufficient audio HOT 1
- Using FT8CN for Field Day? HOT 1
- Unconfirmed QSOs
- 请问作者能不能在cat选项下面的网络IP输入中新增域名输入 HOT 3
- Issue using Bluetooth devices
- 请问有计划适配开发Harmony OS NEXT版吗?
- Serial Port error/no transmit with trusdx HOT 10
- 【求助】ft8_lib中kiss_fftr快速傅里叶变换后如何得到码元? HOT 2
- Transformation of callsign HOT 1
- FT8CN cannot decode contest messages HOT 6
- ft8cn create distorted TX signal when using DF upper than 2000Hz HOT 2
- 输出音量的问题 HOT 2
- KX3 Setup HOT 2
- Free text limitation HOT 2
- Not working "Save QSO for SWL" function HOT 1
- Feature request: Add method to change port number of the WEB UI HOT 2
- another wrong QSO case HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ft8cn.