🎯 Plan for Bullseye changes about moabian HOT 9 OPEN

• upgrade splash so show version
• test from clean Bullseye image
• strategy for default pi username and password
• test upgrade path from Buster (v10)
• moby certificates might be expired?
• remove hardcoded /home/pi references

from moabian.

opencv install from os/setup fails with this error:

from moabian.

Seeing this in dmesg boot log:

Rebooting after setup found /dev/ttyAMA1

from moabian.

Manual setup worked. Now encountering camera issues (joystick crashes). Issues in diagnose

https://www.tomshardware.com/how-to/use-raspberry-pi-camera-with-bullseye

from moabian.

No picamera support re:
https://www.raspberrypi.com/news/bullseye-camera-system/

from moabian.

Bullseye uses Python 3.9.2 and "we won't change that".

ctrl-alt-t opens a terminal window in the wizard environment. From there sudo cancel-rename pi will restore original pi user (this is per the comments from above).

from moabian.

ctrl-alt-t opens a terminal window in the wizard environment. From there sudo cancel-rename pi will restore original pi user (this is per the comments from above).

Also the base OS is built with pi-gen according to /etc/rpi-issue

cat /etc/os-release

from moabian.

Notes from one of the lead devs on updating from buster to bullseye:

from moabian.

The Moab wide-angle camera is "OV5647"

| For a CM4 on Waveshare Nano carrier board, I had to follow these steps to enable the camera.

from moabian.