when configuring -> Unknown status packet is b'\x82\x01`\x00\x00\x00\x00\x00' about hass-jablotron80 HOT 8 CLOSED

Looks like the software is working as expected. Not sure why the messages are not recognised. Its not unusual to get an unrecognised message, but you usual gets lots of messages and some are recognised, is there only a single unknown in the log.

What is your Jablotron model number?

from hass-jablotron80.

Sorry for the late response!

I get this error continuously.
The model is Jablotron JK-84-82Y

from hass-jablotron80.

And there are no other similar errors in the log with a slightly different unknown code?

I assume the alarm is in unset mode when you get this error. Please try setting it and seeing what happens. You
Should either get a different Unknown’s message or the status should be returned correctly
In HA

from hass-jablotron80.

Hi. The answer may come quite late, but this is a debug level message. At this log level, we log every packet looking like a state update but which we didn't figure the exact meaning yet.
I suggest you set your log level to info for normal operation. The debug level is mainly intended for developpers or when trying to figure an issue out.
I hope this helps.

from hass-jablotron80.

sorry it took a while :-)

I get this in the logging (I updated to your latest code):

2020-10-08 13:25:19 WARNING (MainThread) [homeassistant.loader] You are using a custom integration for ha_strava which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant.
2020-10-08 13:25:22 DEBUG (MainThread) [custom_components.jablotron.alarm_control_panel] Sending startup message
2020-10-08 13:25:22 DEBUG (MainThread) [custom_components.jablotron.alarm_control_panel] Successfully sent startup message
2020-10-08 13:25:22 DEBUG (MainThread) [custom_components.jablotron.alarm_control_panel] send_command_loop() enter
2020-10-08 13:25:23 ERROR (ThreadPoolExecutor-0_0) [custom_components.jablotron.alarm_control_panel] The data stream is not recongisable as a JA-82 control panel. Please raise an issue at https://github.com/mattsaxon/HASS-Jablotron80/issues with this packet info [b'\x00\x00\x01\x01']
2020-10-08 13:25:23 WARNING (ThreadPoolExecutor-0_0) [custom_components.jablotron.alarm_control_panel] No packets
2020-10-08 13:25:23 INFO (ThreadPoolExecutor-0_0) [custom_components.jablotron.alarm_control_panel] Jablotron state change detected: None to No Signal
2020-10-08 13:25:23 DEBUG (ThreadPoolExecutor-0_0) [custom_components.jablotron.alarm_control_panel] exiting read_loop()

from hass-jablotron80.

@mattsaxon and @Eerk1975 did you figure this out? I am receiving exactly the same in my logs.

from hass-jablotron80.

@mattsaxon and @Eerk1975 did you figure this out? I am receiving exactly the same in my logs.

nope still the same situation...

from hass-jablotron80.

Please move to https://github.com/tahvane1/jablotron80 as this repo is no longer maintained

from hass-jablotron80.