[FEATURE REQ] Variables/tokens in output file name about axiom HOT 32 OPEN

I've never used variable tokens with ffmpeg before, I'm not sure if it supports that, I will have to ask.

What if I had an output naming section with checkboxes that let you select which settings you want displayed in the output filename? I would have C# variables generate the output filename automatically in the script, then you wouldn't need ffmpeg syntax.

[x] hwaccel
[x] vcodec
[x] pass (1, 2, crf)
[x] bitrate (bv/qv)
[ ] preset
[x] pixelformat
[ ] framerate
[x] size
[ ] scaling

[x] acodec
[ ] channel
[x] bitrate (ba/qa)
[ ] compression
[ ] samplerate
[ ] bitdepth

outfilename.mp4

outfilename Intel-QSV x265 CRF25 yuvj420p 1080p AAC 320k.mp4

from axiom.

That's a great idea. It eliminates the work of parsing the output filename.

I have one more thought, to avoid typing or copy/paste into the Output filename field altogether -- split the Output Naming Section in two, adding a section to copy parts of the input filename:
--------------------------------------------------------------------------------------------
Copy from Input filename
[ ] path   [ ] filename   [ ] extension

Suffixes
Inserted after (if any) the input path, input filename, and Output textfield.
[ ] ... your list ...
--------------------------------------------------------------------------------------------

The final output filename would be a concatenation, in order, of:

[input path if checked] 
[text in Output field, if not blank and contains at least one backslash "\\"] 
[input filename if checked] 
[text in Output field, if not blank and does not contain any backslashes "\\"]
[any suffixes checked]
[input extension if checked, otherwise automatically generated given "Container"]

Notes

• Leading space before the first suffix (if any). Subsequent suffixes separated by space.
• It would be nice to have a read-only "Output filename preview", perhaps just below the "Output" text input field.
• Above rules work for all but the "Corner case" shown below. Still need to work on the logic for that, and just ran out of time for now. Let me know your thoughts.

Examples

All the examples below assume:

• Input textbox value of: C:\path\to\infile.mp4
• "Container" selection of mkv

Notes:

• The third from last line would lead to an error because the resulting name is the same as the input file. I hope ffmpeg would throw an error in that case. Otherwise you would have to catch it to prevent the input file from being over-written (regardless of the new "Override" setting -- that's meant for the output file).
• The last two lines would lead to an error because there is no filename. Again, hopefully ffmpeg would fail. Otherwise, you would have to catch this case, and perhaps add a default name (e.g "noname" resulting in \noname.mkv or C:\path\to\noname.mkv) instead of (what I assume is more programming work) of having to signal an error in the UI.
• In general, I like the principle of letting ffmpeg fail if the user enters something weird and the resulting filename is invalid. It minimizes your work -- don't need to get too fancy checking for errors.

from axiom.

@jorgebr

I will go over this and try to add these features.

The first release might be more simplified until it is complete.

The Output File Namer in Axiom might already handle some of the path issues. It also has a File Renamer that appends (1) to the name if it already exists, to avoid accidental overwrite.

The File Settings Namer will work similar to how the Subtitle menu works. You'll be able to position the settings in the order that you want if needed. Checked settings will be applied to the output filename. You can also Select All, Deselect All, and Load Defaults.

It will take some time to complete, I have to make it work with the axiom.conf config file, so it saves the selected settings on exit.

from axiom.

@jorgebr

I've released an update here
https://github.com/MattMcManis/Axiom/releases
https://github.com/MattMcManis/Axiom/releases/download/v1.9.1.3-alpha/Axiom.zip

I have not uploaded the version file yet, so it will not notify users, and the update button in the program won't detect it.

If you will test it for me first, then I will release the official update in 2 days.

Example Output File Naming

Format
Input Ext mpg

Video
HW Accel Intel-QSV
Video Codec x264
Pass 2-Pass
Video Bit Rate 1234K/1.234M
Video CRF CRF25
Preset p-medium
Pixel Format yuv420p
Frame Rate 30fps
Size 1080p
Scaling sa-gauss

Audio
Audio Codec FLAC
Channel CH-Stereo
Audio Bit Rate 500k/500kVBR
Sample Rate 48kHz
Bit Depth 32-bit

MyFile mpg Intel-QSV x264 1234K CRF25 p-medium yuv420p 30fps 1080p sa-gauss FLAC CH-Stereo 500k 48kHz 32-bit.mkv

Instructions

1. Go to the Settings Tab

2. Under Output → Naming, check the settings you want to appear in the Output Filename

3. Select an Input file

4. Select your Quality settings

5. Press the Output button to save the file, or press Script to generate, the output filename and path will be automatically filled in

6. Your chosen setting should appear in the output filename

7. Settings you choose with menus and controls will be applied to the filename in real-time

8. Flip through the Presets to watch the output textbox filename quickly change

from axiom.

It's looking great! I like how you did the interface.

I did a couple of quick tests, but unfortunately I won't be able to do more extensive testing for a few days. So far, I found:

• The "size" checkbox worked with source set to a value, eg "720p", but does not change the output name when it's set to "Source". Not a big issue, but I think, in this specific case, I would prefer something like "sz-source", similar to what you have with preset (eg "p-super-fast"). When the value is not "source", then don't need the "sz-" prefix because it's self-evident (eg "720p").

• On step 5, I don't know what the "Output" button is. Did you mean the "Convert" button?

• Also on step 5, when I click "Script" to generate the script, I like how it automatically filled in the output filename and path, but if I then edit the text in the Output textbox, it gets overwritten the next time I change a setting (due to Autofill), or if I just press the "Script" button without having changed a setting.
  
  I see that as an issue because I don't see a way of changing the target path and name from something different than the input.
  
  I suggest you autofill the pathname/filename only if the Output textbox does not already contain user-entered text. The rest of the parameters can still be auto-filled.
  
  This is the only significant issue I see so far. I can always change the filename & location in the OS after ffmpeg is done, but I think this could be potentially very confusing to users. Because of that, even with my suggested change above, I would say this is a show-stopper. It's still a confusing interface.

• Step 7 works exactly as you described. I like it, except for the point above (need to be able to edit the target path or name).

• Step 8 did not work for me. It's having trouble loading the presets. But that may be an issue on my end. I'll do more checks on that.

• I tried a few other permutations and couldn't find any more issues.

But overall, this is a phenomenal first version!

from axiom.

@jorgebr

Thanks for testing, I will take a look at these issues and re-upload some improved versions over the next 2 days. I'll notify you when I release a fix.

• The Output button is just the Output Path button, next to the Input button at the top of the program.

• I have the naming ignore settings like Auto, None, Off, Source, Copy, but I can add sz-source.

• I tried creating a variable system to save the user entered output name, so it doesn't get overwritten by the input name, but it looks like it didn't apply correctly.

• Is it having trouble loading the built-in Presets or custom ones?

from axiom.

@jorgebr

I've updated the v1.9.1.0 release file, download it again and replace your Axiom.exe.

https://github.com/MattMcManis/Axiom/releases
https://github.com/MattMcManis/Axiom/releases/download/v1.9.1.3-alpha/Axiom.zip

With the new version fixes:

Output Name Edits

Only edit the Output Filename in the Save File Dialog Window. When you click Save, Axiom will save the original name to a variable outputFileName_Original. Then Tokens will be applied on top of that and saved to a new variable outputFileName_Tokens. This way, there are 2 variables, original name and name+tokens. Now Axiom can always reference the original name when it makes name changes.

But if you edit the name in the Output TextBox while it already has Name Tokens VP8 CRF25 etc. applied, it will think those Tokens are part of the original output filename, and new ones will be applied on top, duplicating them.

The only way to fix this is to have some regex Token remover that backwards engineers the original output filename from the Output TextBox's text. That is possible to do, but will take some time, and may not always work 100%. It has a chance to accidentally strip character sequences that it thinks are Tokens but are not, depending on the filename.

New Token Additions

Video Codec Copy cv-copy
Audio Codec Copy ca-copy
Size Source sz-source
Channel now renders 1CH(mono), 2CH (stereo/joint stereo), 5.1CH, etc.

You'll see them in the Settings Tab Output Naming section, at the bottom of the list. They are separate settings from Video Codec, Audio Codec, Size, so that you can choose to disable them completely for fine tuning the naming.

Press the Load Defaults ↺ button to automatically reorder the list. Doing this will uncheck them all, so you'll have to re-check the ones you want. I would find a way to make it insert newly added token imports in the correct order, but I don't plan on adding many more token types, so it shouldn't be an issue in the future.

from axiom.

@jorgebr

I've added the Regex Token Remover.

https://github.com/MattMcManis/Axiom/releases

When you edit the file name in the Output TextBox, the program can't see what part of the text you changed, so it doesn't understand there's a new file name.

So now I have it backwards engineer the new name by stripping the tokens.

You edit output name text:
Donkey Kong mp4 VP8 CRF16.webm -> New Name mp4 VP8 CRF16.webm

The Regex Token Remover:

1. Strips the tags, leaving only your new file name text.
New Name mp4 VP8 CRF16 → New Name

2. Saves the name to a variable.
New Name → outputFileName_Original

3. Re-applies the Tokens.
outputFileName_Original + Tokens → New Name mp4 VP8 CRF16.webm

It does this in a split second as you type.

Here's an example of regex rules it generates and filters. The actual code in the program covers all the possible dropdown menu tokens, as it dynamically generates them from the menu items.

https://regex101.com/r/iepwCq/1

from axiom.

I did a quick test and it's working. What you did with the regex token remover is brilliant! I can edit the filename in the Output field and it still works.

However, I'm not convinced that should be the interface. There are too many corner cases that could confuse users. They could expect, for example, that if they edit some of the tokens, those changes would be maintained. It's just too much of a new concept, and I fear you'll get a lot of confused people.

Is it not possible to have a separate read-only field which displays the generated name, and thus the Output field would only be used for text that is intended to be edited by the user?

Regardless, the improvement so far is incredible. In fact, it is so good, and it makes it so easy to kick-start multiple processes, that I had to figure out how to "title" the CMD windows so I could easily identify which window is what. I ended up adding a title command, prior to the start command, as follows:
title "CRF35 .. " & start "" /b /wait /low....

The resulting window looks like this:

The 1st argument to the start command is supposed to be the window title, but if I just use that, as follows:
start "CRF30 ..." /b /wait /low ...

the window looks like:

Note the whole pathname to cmd.exe appears first, and that makes it difficult on the eyes.

I really like this and I use it a lot. But I can't really think of a good user interface other than having yet another field called "Shell window title". It's not really possible to auto derive which text is the best reminder of what a particular window is doing, and so it's best left to the user to enter it in, or leave it blank. Is this something that you'd consider?

I'm sorry but I won't be able to do more testing until the weekend. Best!

from axiom.

@jorgebr

Thanks for testing. I'm making more improvements.

I'm not sure I want to add another field for the naming, I'm trying to keep the program compact. I'll see if I can make some adjustments so you can edit the tokens.

For Process Priority, I could add a Shell Title menu. What if I had a toggle with the options for User Custom, which leaves it blank title "" and Tokens, which injects them into the title title " VP8 1300K CRF16"?

from axiom.

@jorgebr

I've attached an update v1.9.1.4 to this post for you, before I release it.

Axiom.zip

I overhauled all the code behind the Output Button and OutputPath() method to make functionality more logical.

I added the Shell Title Menu with options:

• Disabled
• Custom (user defined)
• Job (file name)
• Tokens
• Job+Tokens

There were a few bugs in the regex, such missing input file formats, and fps with decimal 23.976.

I have not yet tested it all extensively.

from axiom.

I was able to do a quick run, and found a bug:

1. Enter in Input filename: c:\path\to\Wild.Kratts S03E02 Where The Bison Roam 1080p x264.mkv
   Output filename: leave blank.
   Other settings: x265 crf30 AAC Preset=superfast Pixel format=yuv420p
   Output naming checkboxes (in case that matters): Video Codec, Video Codec Copy, Video CRF, Preset, Pixel Format, Audio Codec

2. Click "Script". Output filename field becomes:
   " c:\path\to\Wild.Kratts S03E02 Where The Bison Roam 1080p x264 x265 CRF32 p-super-fast yuv420p AAC.mkv"
   So far so good.

3. In Output filename field, delete the word "x264" and hit Delete. The Regex Token Remover seems to work...output name field value is as expected (same as before but without the "x264").

4. But now click "Script" and filename in Output field becomes:
   "Wild.Kt S03E02 Where The Bison Roam 1080p x265 CRF32 p-super-fast yuv420p AAC.mkv"
   ("Kratt" became "Kt")

Just fyi, I was about to report this bug on version 1.9.1.3, for which the filename became:
"Wild x265 CRF32 p-super-fast yuv420p AAC.mkv"
(Anything after the "." got lost)

Really like the options on the drop-down for window title, but I would change the word "Job" to "Filename". I almost didn't try it, thinking it would be "process number". I was going to write here that I didn't like the options, but figured I better try it first. And then I was surprised to see that it really is the filename. Now I love it, and the fact that you give options for filename only, tokens only, or both, is really useful!

from axiom.

Minor issue: Same setup as above, but tried to change the extension in the Output field to ".mp4".
It gets over-written back to ".mkv" when "Script" is clicked. Would need to make clear that can't edit anything after the 1st auto-generated token?

from axiom.

On the prior bug, another case, same sequence, this time without a period in the filename:
Input filename: "Wild Kratts S03E03 Bandito The Black Footed Ferret 1080p x264.mkv"
w/blank Output field, clicking "Script" auto-generates:
"Wild Kratts S03E03 Bandito The Black Footed Ferret 1080p x264 x265 CRF30 p-super-fast yuv420p AAC.mp4"

Then manually deleting "x264" in the Output text, then click "Script", results in :
"Wild Kt S03E03 Bandito The Black Footed Ferret 1080p x265 CRF30 p-super-fast yuv420p AAC.mp4"
(Same issue: "Kratts" becomes "Kt", but note the original filename did not have a "." in it. There must be something else going on.)

from axiom.

@jorgebr

It's regex errors, catching the wrong sections of the text. The regex rules for file formats ra and ts were applied to the filename. I think I can isolate it so it doesn't catch partial text.

Here's the regex generated for your selected options:
https://regex101.com/r/Q3tBJB/1

My new idea is to remove the Tokens Display from the Output TextBox and have them only appear in the Script. That way user can edit the original name in the Output TextBox without the Regex Remover messing it up.

Then if you want to edit any Tokens, you can do so in the Script and the Regex Remover won't interfere. Then press Run and it will use your custom changes.

Another thing is that I did not anticipate using Input Files that already have tokens in the name. Maybe I will extend the Token Remover to remove other Tokens that were applied by users or other programs, to prevent Tokens from doubling up.

from axiom.

@jorgebr

I've redesigned the Token system.

Axiom.zip

Tags will be the term I use for Input Filename Settings.
Tokens will be the term I use for Output Filename Settings.

In the Settings Tab, I added an Input section, with a Tags Menu.
You can set it to Keep or Remove.

This will try to strip all possible Tags out of the Input Filename, revealing the Original Filename.

Mario NES mpg x264 CRF25 p-medium yuv420p 720p AAC 2CH 256k.mp4 → Mario NES.mp4

Now the Output Filename can have new Tokens applied to the Original Filename.

Mario NES.webm → Mario NES mp4 VP8 1300K CRF16 yuv420p Vorbis 192kVBR.webm

Converting mpg (no tags) → mp4+tokens

Converting mp4+tags → webm+tokens

from axiom.

Hmmm... I think this is confusing.

First, removing the Output Tokens from the Output TextBox, and showing them only in the script, is definitely better, because the user now won't think the tokens are editable.
And showing the output result in the script is a good compromise to avoid having to create an extra read-only field.

On the other hand, I find the name of "Tags" for the input confusing, because it is a non-standard use of the word. "Tags" are used for many other purposes (i.e. tagging), and this makes it hard to think of that word in this context.

But also, why is this even necessary? Now that you don't have tokens in the Output field, you don't need the Regex Token Remover at all. You have the "Input" field:

• If the "Output" is blank, you auto-fill it with the input, except substituting the extension given the "Container" selection. If it would result in the same extension, and thus a duplicate filename, currently I think you add a "(1)" to the name, and that is a great solution.
• If the "Output" is not blank, that means the user edited the auto-fill (or was leftover from a prior file -- see next point) and you just don't touch it, regardless of whether there are tokens or not in it. You just append the Output Tokens to the filename (before the extension, of course), and that's it. It's ok if that results in duplicate tokens. That's an issue for the user to solve.
• In the case where the "Output" field is "left over" from a prior file (e.g. user changed the input file), either don't worry about that, or clear the Output field every time the Input field is changed.

OR, perhaps a better idea, don't worry about auto-filling the Output field at all. Have a small button (an arrow pointing from the Input field to Output field) that "copies Input field to Output field", except substituting the extension given the "Container" selection. And that's it.

Sequence for most use cases:

1. Drag new file to Input field
2. Click that new arrow button, which replaces whatever is in the Output field with the new value in the Input field (except for the extension replacement).

That's it! User can click "Script" or "Convert".
This is a really fast workflow.

Separate thought that may no longer be applicable since I'm suggesting you no longer need the Regex Token Remover. You regex expression is trying to filter out all possible tokens individually. That's partly why it's so hard to cover all the cases. But, in the simple case, you know the entire token string (all the tokens) to be generated. Why not search and replace that entire string, instead of on a token by token basis?

from axiom.

Wow... I just found a trick you may be interested in. It's really cool I have to search for these new tricks because your improvements have made it so easy to kickstart a bunch of processes and let them run.

If "Quick Edit" is turned on, simply selecting text in the cmd window will pause the process!
This actually works, unlike "Ctrl-S/Ctrl-Q" which only pauses the display update but not the process.
Found it here: https://medium.com/@harshg0910/click-to-pause-execution-in-windows-powershell-b451044501ac

Alternatively, could use resmon, the Resource Manager, which provides a GUI option to suspend a process. The standard Task Manager does not have that option.

from axiom.

@jorgebr

I can change Tags to Tokens.

You will need the Regex Token Remover because if the Input Filename has existing Tokens, the Output Naming will add the new Tokens alongside the existing ones.

mp4 to webm

Doubled Up x264/AAC and VP8/Vorbis Tokens
Input: File x264 CRF20 AAC 320k.mp4 →
Output: File x264 CRF20 AAC 320k VP8 1300K CRF25 Vorbis 224k.webm

Removed with Regex
Input: File x264 CRF20 AAC 320k.mp4 →
Output: File VP8 1300K CRF25 Vorbis 224k.webm

If the Input Filename has custom Tokens by users or other programs:

mp4 to webm

Removed with Regex
Input: File 1920x1080 [x264] Dolby Digital 5.1 Eng-Subs.mp4 →
Output: File VP8 1300K CRF25 Vorbis 224k.webm

I'll see about having it clear the Output TextBox every time the Input TextBox is changed.

from axiom.

I don't understand why the first example is a problem:
File x264 CRF20 AAC 320k VP8 1300K CRF25 Vorbis 224k.webm

The "conflicting" tokens (eg x264 vs VP8, CRF20 vs CRF25) are just a happenstance that the Input file name has tokens, and so it's up to the user to deal with it. The ability to edit the Script is a good way to do that.

In return, you gain simplicity, for both the user and you. You remove the chance that a user could be confused by the original filename being "changed" by the auto-fill. And you don't need the Regex Token Remover anymore.

And if you want to retain the ability to remove tokens from the input (I can definitely imagine times when it could be useful) , I would make that a separate button, perhaps using an icon of a broom or some other "cleaning" icon.

from axiom.

@jorgebr

Axiom.zip

Updates:

• Changed Input Tags to Tokens
• Added Input TextBox clears Output TextBox on file change
• Added another menu, Output Filename Spacing.

Output Filename Spacing

This can convert all spaces into periods, dashes, or underscores, if needed.
I would just leave it on Original if not needed.

spaces to periods/dashes/underscores
Input: File x264 CRF25 AAC 123k 44.1kHz.mp4 →
Output: File.x264.CRF25.AAC.123k.44.1kHz.mp4

It cannot yet however convert periods into dashes, etc., I still need to write the regex rules to handle preserving number decimal points in tokens like 44.1kHz.

periods to dashes/underscores/spaces (doesn't work yet)
Input: File.x264.CRF25.AAC.123k 44.1kHz.mp4 →
Output: File-x264-CRF25-AAC-123k-44.1kHz.mp4

from axiom.

Hi... 1:40am here. Just glanced at this. Won't have time to download it and try it till tomorrow, but quick thoughts:

• I like the Input > Tokens > Remove option. The new word "Tokens" works, and certainly there will be cases where it is useful.
• Can't wait to try "Input TextBox clears Output TextBox on file change"
• The new "Output Filename Spacing" option is awesome! I am actually doing this a lot! right now -- converting periods to spaces. I use Bulk Rename Utility for that, but it's great to have it built-in to Axiom. Can't wait to try it!

Good night!

from axiom.

One more idea: is it easy to edit the Windows properties of the file? It would be great to add the tokens to the "Comments" property of the file. Here is a screenshot of the field I'm talking about. Just in case, to get this dialog, right-click on a file and select "Properties".

from axiom.

Remember that the Spacing option can only do spaces → periods, but not periods → spaces until I can work out the advanced regex rules to preserve number decimal points. Or else 44.1kHz will end up 44 1kHz.

Update: Someone has given me a regex code that allows converting between all spaces, periods, dashes, underscores while preserving number decimals.

Axiom.zip

For Windows Properties Comments, I had looked into it before, but I think it was too complicated because there were many different file types that had different metadata tables, and some that Windows can't recognize. I think that since it's C# and uses some built-in Windows features to make file changes, it wouldn't work without some external library, such as FLAC. I will have to look into it again.

from axiom.

Downloaded the new version:

• "Input TextBox clears Output TextBox on file change" is not working.
  I dragged a file from Windows Explorer to the Input field, and the Output field was unchanged. It should change to blank.
  
  Even deleting the Input text and pasting new text does not work, even when the cursor exits the field.
  
  Btw, if for some reason you can't get that to work, "auto select-all" upon entering the Output textbox would be almost as good. Then I can click on the field, or hit Tab as needed to get to it, immediately followed by Del or Backspace. That's really quick. The bummer right now is having to hit Ctrl-A to do "Select All" before deleting.

• I love the Title "Filename+Tokens" option!

• The "Spacing" option is awesome! It's correctly ignoring the path, only affecting the filename. The only issue I can find is it's not replacing the deleted tokens with a space. Example:
  Input:   File.name.1080p.Amazon.WEB-DL.DD.2.0.x264-QOQ.mkv
  Settings:   Input Tokens: Remove    Output spacing: Spaces
  
  Output: File nameAmazonDD 2.0 QOQ x265 CRF30 p-super-fast yuv420p AAC.mp4
  (It correctly removed 1080p, WEB-DL, x264, converted DD.2.0 to DD 2.0 (wow, interpreted the number correctly), and added the output tokens. But nameAmazonDD should be name Amazon DD
  
  So instead of just removing the token, you should replace it with a space. When removing consecutive tokens, you would end up with repeated spaces. I would handle that at the end -- use a regex to replace any # of consecutive spaces with a single one (Replace ˽˽+ with ˽. ("˽" indicates empty space.)

from axiom.

For the Windows Properties Comments, I agree with your decision that it's not worth that much effort. You are right, there's a lot of different permutations. I found out the hard way, for example, that I can edit the properties of mp4 files but not of Matroska (mkv) containers.

from axiom.

I'll fix those issue.

I only added the Output TextBox clear on Input Button Press, I forgot to add it to Drag and Drop.

I'll have to add those Tokens, Amazon and DD, as well as many others, to the Remover.
It won't work 100% of the time unless I can cover all tokens.

Example, regex rules for Dolby Tokens alone need to cover:
Dolby (Digital, Pro, Pro II, TrueHD, Vision, etc), DDP, DD+, DD, 2.0, 5.1, 7.1, etc.

https://regex101.com/r/ggH54O/1

I'll have to see why it's combining leftover tags with no spaces nameAmazonDD.

from axiom.

Added Input Drag and Drop clears Output TextBox
Added more Token types to the Regex Remover
Fixed leftover Tokens combining without spaces.

https://github.com/MattMcManis/Axiom/releases/download/v1.9.2.0-alpha/Axiom.zip

Input Token Remover

1. Filename
   File x264 CRF20 XYZ AAC 320k.mp4

2. Regex identifies and removes tokens.
   It does not recognize XYZ (an example uncommon token, not in the regex rules).
   File x264 CRF20 XYZ AAC 320k.mp4

3. New Filename without tokens. The uncommon token was left in.
   File XYZ.mp4

Output Token Appender

1. Tokens are added to the end of the filename.
   File XYZ VP8 1300K CRF25 Vorbis 128k.webm

Here's the regex. Let me know if you find any tokens that don't work.

https://regex101.com/r/vcufKK/2

from axiom.

It's working great! One more token: YIFY

from axiom.

@jorgebr

Try out this version
Axiom.zip

I want to avoid adding names of piracy groups into the code and program. I've only added general tokens. But I've added a text field where the user can add their own custom tokens and it will save/load them from the axiom.conf config file.

I've also added Input and Output Clear TextBox Buttons.

from axiom.

You are totally right -- adding a field for user tokens is a much better solution.
The ClearText box buttons work.
And overall, it works great!

I mean, WHAT A JOB YOU'VE DONE! Right now, this is such a good tool! My workflow is exponentially faster. THANK YOU!

Right now, I can't think of any more improvement ideas for the one-file-at-a-time use case.

Just for the sake of contributing ideas for the future -- the next improvements I can think of are for queuing multiple runs. I will create a new issue for that titled "Queues"

from axiom.

@jorgebr

Thanks for testing. We really took the program far.

The Remove option will still try to remove all general Tokens on its own, even if the Custom TextBox is empty, but the Custom TextBox will remove any extra Tokens you want to add.

I've done a little more work on it and released it v1.9.2.2.

There will probably always be hidden bugs, as the program is so big it's hard for me to test on my own, that's why it's still in alpha. By v2.0, once most of all the main features have been added I'd like to switch it to beta.

from axiom.