manoukianv Goto Github PK

ads1255-ads1256

Arduino Library for Texas Instrument ADS1256 Very Low Noise, 24-Bit Analog-to-Digital Converter

arduinojoysticklibrary

An Arduino library that adds one or more joysticks to the list of HID devices an Arduino Leonardo or Arduino Micro can support.

bcnc

GRBL CNC command sender, autoleveler and g-code editor

bigtreetech-skr-v1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required

biquad

Implementation of Biquad filter as an Arduino library

diy-sim-racing-active-pedal

This is my Sim Racing DIY Active Pedal prototype, an affordable alternative to the official Simucube pedals that cost over $2,000 per pedal.

ebyte_lora_e220_series_library

Arduino LoRa EBYTE E220 LLCC68 device library complete and tested with Arduino, esp8266 and esp32.

edtracker-hardware

EDTracker Hardware : PCB & 3DBox

edtracker2

EDTracker2 Arduino sketches for Invensense MPU-xx50 based devices

esp32encoder

A Quadrature and half quadrature PCNT peripheral driven encoder library supporting 8 encoders

espasyncwebserver

Async Web Server for ESP8266 and ESP32

espwheel

The source code of the FFB Steering Wheel firmware for Arduino Leonardo from Ai-wave

ffbtweak

gsvesc

DC Motor Controler based on Benjamin Vedders VESC

klipper

Klipper is a 3d-printer firmware

mks-tft

MKS TFT32/28 alternative firmware

nano_stepper

Stepper feedback controller

openffboard

OpenFFBoard is a universal force feedback interface for DIY simulation devices

openffboard-configurator

A simple GUI to configure the Open FFBoard

openffboard-hardware

This contains the hardware designs of the OpenFFBoard

opensimpedals

Source code and electronic for OpenSimPedals

simucube-opensource-firmware

This is the repository for the opensource development of the SimuCUBE firmware.

smartdpv-firmware

smarttrimix

Trimix Analyzer /!\ do not used for dive or plan !!!

smoothieware

Modular, opensource, high performance G-code interpreter and CNC controller written in Object-Oriented C++

steeringwheelbluetooth

stm32f4

STM32F4 Testing

tmc2208pilot

Application running on Arduino to setup and monitor TMC2208 by UART. Design to works with smoothiware firmware.

trimix-analyzer

Trimix-analyser

vescfirmware4openffboard

The code for my custom BLDC controller.