Trouble with Blender 2.91.2 about ncnc HOT 9 CLOSED

Well I used Blender 2.83.12 and 2.91.2 and download the last release.
In Blender 2.83.12 I don't see the feature -SHOW

In Blender 2.91.2 I can see it. I can convert to G-Code and Export the file. (That file works fine with CNCjs)
But I can't select a port, there is only the: "Select the machine" - but nothing more.

Well, take so much time you need for your other work. I can wait.

from ncnc.

OK. I can only the PlugIn in Windows and on a Mac. Might be thats the problem. As soon as possible I wil install an Linux System and check it again.

from ncnc.

Hi,
I'm so glad as I found your AddOn and I installed it at once.
I'm a blender use for many years an dhope you can help me.
I build my own CNC with Arduino Uno as Controller where GRBL 1.1 is installed.

I got access with other programms to the machine (CNCjs) but in Blender I can't establishe a connection. I also test it with Blender 2.8.3

Hi,
First off, I assume you download the addon from here;
https://github.com/manahter/nCNC/releases

If you downloaded the codeButton in the picture, it will not work.

Since I am busy these days, I cannot spare much time for development.
I'll test it for the Blender 2.9x at the first time I'm available.

from ncnc.

Thanks,

I'll test it soon.
teşekkür ederim

Frank

from ncnc.

Well I used Blender 2.83.12 and 2.91.2 and download the last release.
In Blender 2.83.12 I don't see the feature -SHOW

In Blender 2.91.2 I can see it. I can convert to G-Code and Export the file. (That file works fine with CNCjs)
But I can't select a port, there is only the: "Select the machine" - but nothing more.

Well, take so much time you need for your other work. I can wait.

I've tested version 2.83.12 now. I did not see a problem. What do you mean by 'SHOW'?

I tested version 2.91.2 as well. I did not find any problems.
Possible reasons for the problem may be:

1. Your machine connection remained open in another program. So the nCNC plug-in cannot see the machine.

2. I'm testing them on Linux. They haven't been tested yet on Windows or Mac.

NOTE: Remember that only one program can be connected to the machine at a time.

If you can share the problem in more detail, maybe we can find a solution.
For example, if you can share images, code outputs, etc., let's do a review later.

from ncnc.

2.83.12

2.91.2

from ncnc.

If you know Turkish, you can write Turkish after that.
I just don't recommend you install Linux for this add-on. Because the add-on is not yet professional. Will develop over time.

from ncnc.

Sorry, but my Turkish is not good enough for conversation.
Well, hope it works soon with windows.
Because I'm a technic freak I'll test it with Linux too. I already planed to use a Linux System - so why not!
You did a good work - and I hope I can support it. I wrote already something about it in a german maker-forum.

from ncnc.

Sorry, but my Turkish is not good enough for conversation.

Okay it does not matter.

Well, hope it works soon with windows.

I'll test for Windows for a day in the future. But not very recently. I will do that when the plugin becomes a little more professional.

Because I'm a technic freak I'll test it with Linux too. I already planed to use a Linux System - so why not!

After spending some time in Linux, it gets more beautiful.

You did a good work - and I hope I can support it. I wrote already something about it in a german maker-forum.

Thank you.
Development continues.

from ncnc.