Version information about dappermime HOT 2 CLOSED

dapinfo20210212.zip

It works just fine here; I've not been able to replicate what you are seeing. I've attached quick and dirty source code that produces the following output:

W: 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
R: 00 06 32 2e 30 2e 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Moreover, if anyone runs openocd, they will see:

Info : Hardware thread awareness created
Info : RP2040 Flash Bank Command
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : CMSIS-DAP: SWD Supported
Info : CMSIS-DAP: FW Version = 2.0.0
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 0 TDI = 0 TDO = 0 nTRST = 0 nRESET = 0
Info : CMSIS-DAP: Interface ready
Info : clock speed 4000 kHz

Which devices have previously tested your CMSIS-DAP implementation against?

Thanks.

from dappermime.

I compiled "make BOARD=stm32f103bluepill" and "make BOARD=raspberry_pi_pico" and flashed and both report no Version string with blackmagic hosted where my other CMSIS DAP board show a valid version string. However dapinfo also show the version string on bluepill ans pico, so the HID handling in blackmagic needs a kick. Thanks for the small example!

from dappermime.