Comments (6)
Error found
Output No. 13 at 0.00110001 has been generated
Current Time Step = 1.56446e-07
Total time: 235.362, Neigbour search time: 0, Accel Calc time: 118.476
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 20in particle0
Max flux: 0
Max Displacements: 0.000121973, 9.21946e-05, 0.000306705,
Performing Nb search
Performing Nb search
Performing Nb search
←[1;31mFatal: Too small time step, please choose a smaller time step initially to make the simulation more stable←[0m
from weldform.
Output No. 8 at 0.000600262 has been generated
Current Time Step = 3.59869e-07
Total time: 69.3937, Neigbour search time: 0, Accel Calc time: 32.88
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 0in particle0
Max flux: 0
Max Displacements: 4.79382e-05, 3.1379e-05, 9.79425e-05,
Output No. 9 at 0.000700306 has been generated
Current Time Step = 3.59869e-07
Total time: 91.4586, Neigbour search time: 0.001, Accel Calc time: 43.602
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 62521.6in particle11093
Max flux: 0
Max Displacements: 346971, 324799, 147009,
from weldform.
Duplicating ts:
Output No. 4 at 0.000200087 has been generated
Current Time Step = 7.19739e-07
Total time: 11.5041, Neigbour search time: 0, Accel Calc time: 5.323
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 0in particle0
Max flux: 0
Max Displacements: 5.21795e-05, 4.18968e-05, 4.24711e-05,Output No. 5 at 0.000300131 has been generated
Current Time Step = 7.19739e-07
Total time: 79.3219, Neigbour search time: 0, Accel Calc time: 42.613
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 2340.83in particle2701
Max flux: 0
Max Displacements: 5.04107e+136, 6.78059e+136, 3.51053e+136,
from weldform.
But in automatic:
Output No. 13 at 0.00110008 has been generated
Current Time Step = 1.7499e-07
Total time: 183.328, Neigbour search time: 0, Accel Calc time: 87.775
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 0in particle0
Max flux: 0
Max Displacements: 0.000131537, 9.0574e-05, 0.000305539,Output No. 14 at 0.00120003 has been generated
Current Time Step = 1.59873e-07
Total time: 208.879, Neigbour search time: 0, Accel Calc time: 99.953
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 0in particle0
Max flux: 0
Max Displacements: 0.000158942, 0.000108839, 0.000365365,
←[1;31mFatal: Too small time step, please choose a smaller time step initially to make the simulation more stable←[0m
from weldform.
In original Compression example
Output No. 14 at 0.00120002 has been generated
Current Time Step = 1.56953e-07
Total CPU time: 148.964
, Nb: 0.016, StAcc: 0.004, PrAcc: 3.524Ls Acc: 119.027Contact: 0Msh: 0, BC: 0.554, mv: 6.186
Max plastic strain: 0in particle0
Steps count in this interval: 612Total Step count4934
Total Nb search time in this interval: 0Average Nb search time in this interval: 0
Avg Neighbour Count43
from weldform.
Deleted external nb search
Output No. 15 at 0.00130007 has been generated
Current Time Step = 1.44539e-07
Total time: 248.622, Neigbour search time: 0, Accel Calc time: 136.071
Max, Min, Avg temps: 20, 20, 20
Max plastic strain: 0in particle8
Max flux: 0
Max Displacements: 0.000143044, 0.000104149, 0.00043313,
from weldform.
Related Issues (20)
- Correct time step calculation (including accel)
- FSW example not Working with Fraser Solver HOT 4
- Damage / Failure Model
- Use material class for EP in bilinear material
- Bilinear material model is crashing since material_ pointer is created in general reading
- CalculateEquivalentStress is crashing in Damage calculation
- Damage JC traction model stops when run with several processors HOT 1
- Bilinear Material is crashing with both Fraser and LeapFrog Solver HOT 8
- Contact not working properly with Damage
- Discard far away particles from NB, surface and calculations
- Contact compression Rot example is broken
- Johnson Cook crash when not initial yield is put
- Damage Calc Stops without error (and running in only 1 proc, see prev issue)
- Boundary Zones ID not working in damage models
- XY GHOST Symmetry is not working HOT 2
- Out of plane displacements at axisymm contact HOT 4
- ERROR IN AXIS PLANE MESH
- Thermal Coupling on AxiSymetric 2D not working HOT 1
- Frictional contact does not work on 2D Axisymm
- Error when NASTRAN file has exponential sign
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from weldform.