Comments (12)
[deleted comment]
from reaver-wps.
Sorry-my system is a 32-BIT system
Original comment by [email protected]
on 31 Dec 2011 at 11:32
from reaver-wps.
A timeout just means that Reaver didn't get the expected next packet within the
allotted amount of time; this could be due to corrupted or dropped packets on
either the attacker's or the AP's side. You typically see this a lot if you
have a lot of APs/interference in your area, or if the target AP has a low
signal strength.
The Netgears usually do implement lock-outs, so this could be the issue,
although Reaver will usually warn you when it detects that the AP has locked
itself.
I'm going to be out of town for the holiday weekend, I'll take a closer look at
the pcap when I get back. Thanks!
Original comment by [email protected]
on 31 Dec 2011 at 1:29
from reaver-wps.
@stew, I added these options, when starting reaver, "-r 20:30 -d 3" since I
was getting lock-out/rate-limit/same pin issues after about two-to-three
minutes with my WNR1000, WNDR3400, and WNDR4000 routers.
Original comment by [email protected]
on 31 Dec 2011 at 2:24
from reaver-wps.
stew, taking a look at the pcap it doesn't look like the typical MO of a
lockout, but different vendors and devices implement WPS slightly differently
sometimes so this could be the issue. It looks like your pcap stops about 1.5
minutes after you started getting the errors; did you try letting it run
longer, or stopping, waiting and re-starting the attack?
Original comment by [email protected]
on 3 Jan 2012 at 4:18
from reaver-wps.
stew, have you tried specifying the --win7 option? Some APs are particular
about their M2 WPS messages, which is where your pin attempts are failing.
Original comment by [email protected]
on 3 Jan 2012 at 6:49
from reaver-wps.
Hi guys,
Finally got it working using BTR1, on Vmware 3.1.5 player. Used 1.3 beta. Alpha
USB card as previously described. Options were
reaver -i mon0 -b xx.xx.xx.xx.xx -d 0 -t 10 -w -vv
Hope this helps others-seems to be VERY AP dependent as others I can associate
but no PIN generations, others I cant even associate. Power levels are good.
Original comment by [email protected]
on 3 Jan 2012 at 7:30
from reaver-wps.
Yup, some APs are very particular, which is why there are all those advanced
options in Reaver. :P This is also why there's the --auto feature and the
database for plugging in options to be used automatically whenever XYZ router
is encountered.
Original comment by [email protected]
on 3 Jan 2012 at 7:38
- Changed state: WontFix
from reaver-wps.
Just got the latest from SVN, which I take it has the newly released full blown
version. Is there a part/FAQ that tells you how to use the web side of the tool?
Original comment by [email protected]
on 3 Jan 2012 at 8:03
from reaver-wps.
The command line version of Reaver has been fully open sourced. The GUI front
end is still only for the commercial version. See issue #54.
Original comment by [email protected]
on 3 Jan 2012 at 9:00
from reaver-wps.
i have the same problems, i get % BUT! i must turn it off for 3min and then
start it again, and do this all the time. it allways stuck after 1-2%
backtrack 5 vmware alfa 036
anyone know what too do? :(
Original comment by [email protected]
on 4 Jan 2012 at 9:23
from reaver-wps.
if i dont press ctrl c its just stuck on the same pin and trying and trying
all the time, but when i press ctrl c and waits 3-4min its works fine 1-2%
Original comment by [email protected]
on 4 Jan 2012 at 9:30
from reaver-wps.
Related Issues (20)
- reaver don't work HOT 1
- Supplied full pin but Reaver doesnt succeed HOT 1
- error 0x02
- WPS Nack issue
- No networks shown at all when using wash HOT 2
- Fails to associate??
- reaver problem Associated with
- Just get timeout warnings
- Help me from out of this [+] Sending EAPOL START request [!] WARNING: Receive timeout occurred HOT 1
- Wps-pin combined with reaver . Most likely to succeed.
- Failed to associate with [BSSID]
- Strange reaver resuming HOT 2
- 30:91:8F:2F:3F:B1
- Reaver cannot associate or complete WPS transaction under some circumstances HOT 1
- Authentication timeout
- onfig
- Reaver Not Working on Most of Zyxel Routers.
- Help guys :) HOT 2
- [!] WPS transaction failed (code: 0x02), re-trying last pin
- hidden ssid wps
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from reaver-wps.