Feature request - convert the Solenoid pin to a Temperature Controlled option for a Tower Fan about keg-cop HOT 6 CLOSED

This should be possible to do by swapping the solenoid pin over to be used by a thermostat control. Putting it in the "enhancements" list.

from keg-cop.

Something like this?

from keg-cop.

Perfect!
And no delay timer on that pin, right? Not like the compressor/cooling pin.

from keg-cop.

Right, I think I have like a 10 second min time to keep it from hammering the relay should something go wrong.

I need to test it and all that, but the bones should be there anyway.

from keg-cop.

If you want to test this, BrewFlasher has been updated to Keg Cop Alpha to 1.2.0-Alpha.1.

This should be the release I made earlier tonight (1.1.1) with all the bug fixes plus the Tower Fan.

I am headed out for a week and a half, so if you have issues just note them here and I'll get them when I get back.

from keg-cop.

Okay this is in feature1.2 now. @thorrak will be adding a "try this" for you here in a few (to see if your SPIFFS memory is bad) and you can test this code. Under -> Settings -> Temperature -> Control, you can enable the Tower Fan control and setpoint. When this is enabled, the "Solenoid" control will be disabled as this repurposes that pin.

Here's the control section:

This is how the icon looks when not on:

This is how it looks when it is on/blowing:

I'm closing this now as "complete." It will be in 1.2 when I release it.

from keg-cop.