Comments (9)
larsbrinkhoff
commented on June 20, 2024
I believe you should use qemu-user-riscv32, but since I don't have this set up properly now I'm not sure.
from lbforth.
Phi-Ho
commented on June 20, 2024
Hi,
Do you still have a runnable RISC-V lbForth on your computers to verify
reported issues ?
Regards,
phiho
…On Tue, Nov 24, 2020 at 12:22 PM Lars Brinkhoff ***@***.***> wrote:
I *believe* you should use qemu-user-riscv32, but since I don't have this
set up properly now I'm not sure.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#95 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABDAWSXCZ7BQ3D6L77YYEP3SRPTT3ANCNFSM4UBBBF6Q>
.
from lbforth.
larsbrinkhoff
commented on June 20, 2024
Yes. I built it now and ran the tests successfully. Attaching a zip file.
riscv.zip
from lbforth.
Phi-Ho
commented on June 20, 2024
Hi,
Thank you very much.
Would you please share the environment where you just built the attached
RISC-V lbForth so that I can build it on my machine.
Regards,
phiho
…On Tue, Nov 24, 2020 at 3:14 PM Lars Brinkhoff ***@***.***> wrote:
Yes. I built it now and ran the tests successfully. Attaching a zip file.
riscv.zip
<https://github.com/larsbrinkhoff/lbForth/files/5592401/riscv.zip>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#95 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABDAWSQ76N5QWA2H2RSNARTSRQH3BANCNFSM4UBBBF6Q>
.
from lbforth.
larsbrinkhoff
commented on June 20, 2024
I built it like this, in two steps:
make clean all TARGET=x86 OS=linux
make TARGET=riscv OS=linux
If your host is Windows, use OS=windows on the first line instead.
from lbforth.
larsbrinkhoff
commented on June 20, 2024
QEMU isn't needed for building a target Forth. It's just needed for running of testing the target.
from lbforth.
Phi-Ho
commented on June 20, 2024
Hi,
Thank you for your response, I could build it on my machine but still
cannot run ịt
I would like to run the tests on my machine. How did you do it on your
machine, what tests did you do?
Regards,
…On Wed, Nov 25, 2020 at 2:22 AM Lars Brinkhoff ***@***.***> wrote:
QEMU isn't needed for *building* a target Forth. It's just needed for
running of testing the target.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#95 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABDAWSR3IOU6Y2CEF3AIXEDSRSWBZANCNFSM4UBBBF6Q>
.
from lbforth.
larsbrinkhoff
commented on June 20, 2024
The test are run with "make check TARET=riscv OS=linux". The RISC-V binary is run using the script targets/riscv/run.sh. As you can see, you will need something like riscv32-linux-user/qemu-riscv32. Since it was many years ago I worked on this, I can't say how to do this today.
from lbforth.
Phi-Ho
commented on June 20, 2024
Hi,
Thank you so much for your clarification. It is great that your RISC-V
environment is still running
I am still struggling.
Regards,
phiho
…On Wed, Nov 25, 2020 at 8:21 AM Lars Brinkhoff ***@***.***> wrote:
The test are run with "make check TARET=riscv OS=linux". The RISC-V binary
is run using the script targets/riscv/run.sh. As you can see, you will need
something like riscv32-linux-user/qemu-riscv32. Since it was many years
ago I worked on this, I can't say how to do this today.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#95 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABDAWSWLHTWSUG6CRI7BOMTSRUAEDANCNFSM4UBBBF6Q>
.
from lbforth.
Related Issues (20)
- Remove h-[defined]
- Hardware exceptions HOT 1
- Forgetting a word and calling it crashes HOT 1
- marker is broken
- do ... +loop with negative increment doesn't loop HOT 1
- make fail on cygwin-x86_64 HOT 2
- ROM-able forth HOT 1
- Multics: GE 635/645/6180/DPS-8(m)
- load-address HOT 4
- Undefined: TO_DOES HOT 17
- Undefined: TO_DOES HOT 2
- File not found HOT 3
- lbForth Internals HOT 43
- include target.fth HOT 1
- RISC-V build: Undefined eax HOT 1
- Undefined: ' HOT 2
- code write-file HOT 1
- sysdir for Windows HOT 1
- Building lbforth on arm 64bit Angstrom Linux HOT 29
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from lbforth.