Edison toFlash.tar.gz firmware fails to reboot about signpost HOT 3 CLOSED

On Wed, Feb 15, 2017 at 12:08 PM, Christopher Brooks < ***@***.***> wrote: The signpost/software/edison/toFlash.tar.gz image seems to not work for me. I installed git lfs: sudo port install git-lfs git clone https://github.com/lab11/signpost.git cd signpost/software/edison git lfs track toFlash.tar.gz git lfs pull toFlash.tar.gz The image size seems correct and the file seems OK: bash-3.2$ ls -l toFlash.tar.gz -rw-r--r-- 1 cxh staff 158338761 Feb 15 11:39 toFlash.tar.gz bash-3.2$ tar -ztvf *.gz | head drwxrwxrwx 0 root root 0 Nov 22 01:15 toFlash/ -rw-rw-rw- 0 root root 4194304 Nov 22 01:09 toFlash/edison_ifwi-dbg-01-dfu.bin -rw-rw-rw- 0 root root 4194304 Nov 22 01:09 toFlash/edison_ifwi-dbg-00-dfu.bin -rw-rw-rw- 0 root root 742 Nov 22 01:09 toFlash/filter-dfu-out.js -rw-rw-rw- 0 root root 4194468 Nov 22 01:09 toFlash/edison_ifwi-dbg-01.bin -rw-rw-rw- 0 root root 4194304 Nov 22 01:09 toFlash/edison_ifwi-dbg-03-dfu.bin drwxrwxrwx 0 root root 0 Nov 22 01:09 toFlash/helper/ drwxrwxrwx 0 root root 0 Nov 22 01:09 toFlash/helper/images/ -rw-rw-rw- 0 root root 315857 Nov 22 01:09 toFlash/helper/images/Edison-arduino-blink-led.png -rw-rw-rw- 0 root root 298970 Nov 22 01:09 toFlash/helper/images/Edison-breakout-board.png bash-3.2$ When I use the Intel Edison Setup Application to install this file, I see it validate the image, and then there is a message about dfs (not sure about that) and then I get a window that says: Uh-oh! Your Intel Edison did not update, This is likely because your Intel Edison did not reconnect properly, You'll need to download the newer firmware and manually update the Intel Edison Board. Detailed instructions are at https://software.intel.com/en-us/flashing-your-firmware-edison I'm able to download the latest image from Intel and install that. Should signpost/software/edison/toFlash.tar.gz work on an bare Intel Edison that is just connected to a SparkFun Base Kit for Intel® Edison KIT-14105 <https://www.sparkfun.com/products/14105> ? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#28>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AGIJUOqC3zMSgzx09qFB6n_cjlfCouiGks5rc1tDgaJpZM4MCL9D> .