ERROR: Wireless Receiver Not Found. about xbox360wirelesschatpad HOT 18 CLOSED

Can you post some of the numbers on your wireless receiver? Also, can you 
attach the .inf that LibUSB made.

In addition double check that there is a win32libusb entry in your device 
manager.

http://i.imgur.com/65yFlBR.png

thanks for taking a look!  maybe it will be of some use to you as well :)

Are you using an official Microsoft xbox 360 USB receiver? You're created .inf 
indicates the Vendor is "Atheros Communications, Inc.", it should say 
Microsoft. I would uninstall the driver (via device manager) an try to 
reinstall the LibUSB part again.

For reference, this project will only work with an official microsoft usb 
receiver.

i had the same issue.

uninstall all your other xbox controller drivers or open your services and stop 
any other process/service related to the controller.

then double check vjoy is the only app running. type joy.cpl in the start menu 
and press enter.
vjoy should be the only installation running

then relaunch wireless chatpad exe and it should work

im getting this same issue, i can not figure this out, please help. also im 
running windows 8 x64

 ashoz, I'd make sure that the receiver is compatible with the latest version of Microsoft's drivers. What version of the Accessories software came with the driver disk of the receiver or did it even come with a driver disk?

Getting the same issue. :( Win 8.1 x64. There is no libusb entry in my Device 
Manager I notice. Mine is an official Microsoft receiver. If you can help me 
fix this, please email me at [email protected] or add me on Skype at 
dustin.perolio

Thanks!

Seem to have found a solution.

https://github.com/libusb/libusb/wiki/Windows#Windows_8x_Support

"Note that if you install the libusb-win32 driver manually, you will also need 
to install the libusbK DLL, as all libusb-win32 accesses are done through it. 
One way to install/update libusbK.dll is to install libusbk development kit 
(libusbK-x.x.x.x-setup.exe from Sourceforge site and choose to update the 
system files during the installation."

I simply installed libusK DLL and it seems to have fixed it. :D Now to figure 
out how to speed up the mouse control and other stuff... xd Thanks for this!

There's so many things that have been causing this that we'll look into it 
further. Mouse control can only be adjusted through the code, but I may add it 
into the settings later on.

Hi all,

I have the same problem and i tried all your solutions, but the chatpad doesn't 
work anyway. Do you have others solutions for this problem ?

Thank you for your work, 

PS : I'm on Windows 8.1

It sounds like there's some cases where it won't run on windows 8. It is 
compatible, it runs on my windows 8 machine just fine. This may be a libusb 
issue. We'll look into this further.

I tried everything no lock... any development here?

This happened to me but was fine after i restarted my computer and it all 
worked. 

I'm getting this same error on Windows 7 x64. When I try to install LibUSB, it 
says that I need a 64 bit installer (which I can't find anywhere), and nothing 
else seems to work. vJoy will allow me to configure a device, but when I go to 
monitor vjoy my inputs on my controller don't change anything. I get the same 
error messages when I try to launch Xbox 360 Wireless Chatpad as the OP. 

Any ideas where I may be going wrong? I'm assuming it's with the instalation of 
LibUSB, but I have no way to tell if it's installed correctly.