Failed to update callback about hass_nuki_ng HOT 6 OPEN

in 0.2.1 I've added hass URL pre-check, to avoid the confusion

from hass_nuki_ng.

I noticed you're using duckdns. The bridge doesn't support HTTPS, so it can't call back on an HTTPS url. I wonder how it seems to be working. Only polling...

from hass_nuki_ng.

Thanks for the reply. So the only chance is to use http optionally with local IP address only?

from hass_nuki_ng.

@kordys yes, http url accessible by the bridge should be enough to resolve the issue

from hass_nuki_ng.

Strange thing happened when configuring the integration from the external address. The integration would install normally, except I didn't get a field for "Home Assistant internal URL" in the config page, then the callback would fail and I would get an error in the log: "Failed to update callback https://192.168.0.20:8123/api/webhook/nuki_ng_bridge_hook_xxxxxx"

(note the https)

removed integration, tried installing again from local address, found the Internal URL field, corrected to http, and the callback now works fine. Leaving a note here in case someone finds themselves in the same situation, until this is fixed.

from hass_nuki_ng.

when configuring the integration from the external address. The integration would install normally, except I didn't get a field for "Home Assistant internal URL" in the config page

No strange thing: there's no field for internal/external, just the URL, it's up to you to pick the correct URL. Since the bridge doesn't support SSL, you need to choose the appropriate http URL.

from hass_nuki_ng.