kushaljana Goto Github PK

aero-matlab

My matlab homework files

arclengthmethod

Arc-length method using an extrapolated predictor

fea_composite_laminate_plates

A code for the linear static and modal analysis of laminate composite plates using the Kirchoff-Love theory of thin plates and the laminate composites theory. The supported geometry is a rectangular plate with or without one hole.

global-ship-hull-structural-analysis-based-on-the-finite-element-method

The goal of this project is to develop and analyze a structural model of a tanker midship block using the commercial software Ansys Mechanical ADPL. The block under consideration is 30 m long and structurally streamlined to accommodate this circumstance study. To enhance the seal, a watertight bulkhead with a cross-section of X=0 m was installed. T

hydrofoil-stability

Matlab/Octave code for the calculation of Eignemodes / Eigenvectors of an inverted "T" hydrofoil at high speed

matlab

meshfree-modelling-of-thin-plate-bending-using-reproducing-kernel-particle-method-rkpm-

Comparison study between numerical methods using MATLAB - Finite Element Method (FEM) & RKPM

numericalcomputation

搜集一些数值计算开源项目，并且复现它们

opendatasets

A curated collection of datasets for data analysis & machine learning, downloadable with a single Python command

phd

PhD Dissertation: Analysis of Surface Cracks in Plates Loaded in Bending under Elastic-Plastic and Fully-Plastic Conditions

ptfem

Matlab code for FE analysis under 2D axisymmetric stress condition.

rectangular-plate-with-hole

The follwoing Ansys APDL-Code shows the FEM-Simulation of a rectangular Plate with a hole

reliability_analysis_of_stiffened_kirchhoff-s_plate

The reliability analysis is studied for stiffened Kirchhoff's plate bending using the Finite Element Method in MATLAB. We used the Hsieh-Clough-Tocher (HCT) element with 4 nodes and 10 degree of freedom for each triangular element. The applied force and Young’s Modulus were random, and we used the First-Order Reliability Method (FORM). The numerica