Device works correctly using "ezsp" driver but not with "ember" driver (EGLO 99099 with ZBDongle-E) about zigbee2mqtt HOT 6 OPEN

Just noticed something similar. I've had it set to ember for quite some time but after updating to 1.38 suddenly all my non-battery devices stopped responding. Changed it to ezsp and everything works again.

from zigbee2mqtt.

Just noticed something similar. I've had it set to ember for quite some time but after updating to 1.38 suddenly all my non-battery devices stopped responding. Changed it to ezsp and everything works again.

This seems the opposite for me, the device that doesn't work with ember (EGLO 99099) is the only battery-powered device I have, the others that work with ember are not with battery, Frient IOMZB-110 and Tuya TS011F

from zigbee2mqtt.

Just noticed something similar. I've had it set to ember for quite some time but after updating to 1.38 suddenly all my non-battery devices stopped responding. I changed it to ezsp and everything works again.

I have similar issue. I changed the driver to ember and my IKEA VINDSTYRKA started to throw errors and not report anymore, also OTA check for updates does not work either. Once I change back to ezsp, everything is back to normal. I have a PIR sensor with a battery, and that one works fine with both drivers.

from zigbee2mqtt.

my sunricher / iluminize battery powered light switches also stopped working.
other sensors are working (aqara mostly).
smar tplugs also seem to do fine.

from zigbee2mqtt.

I have also a similar problem. The Paulmann switch 501.34 has no action on ember (null), on ezsp it runs.

from zigbee2mqtt.

I'll link in my error report: #22249
For my it also looks like battery powered devices still report values, but mains powered devices don't work, or work rather slowly.

from zigbee2mqtt.