Impossibile to create a class about fs_nano33ble HOT 4 CLOSED

Hi @Sladerix

FYI, the new FS_Nano33BLE v1.2.1 has just been published to support more boards such as SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE, etc. using Seeeduino mbed core

Best Regards,

Releases v1.2.1

1. Add support to Seeeduino nRF52840-based boards such as SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE, etc. using Seeeduino mbed core
2. Add astyle using allman style. Restyle the library
3. Display compile warning only when _FS_LOGLEVEL_ > 3

from fs_nano33ble.

Hi @Sladerix

However, when I run the example code, everything works as expected.

Sorry I don't have time to help you in this, unless you prove that this is a bug of the library.

I suggest you post the issue on Arduino Forum or any programming Forum and ask for help. Remember to post everything (your code, steps how to duplicate the issue, etc.) so that anybody can verify.

Good Luck,

from fs_nano33ble.

Hi @Sladerix

However, when I run the example code, everything works as expected.

Sorry I don't have time to help you in this, unless you prove that this is a bug of the library.

I suggest you post the issue on Arduino Forum or any programming Forum and ask for help. Remember to post everything (your code, steps how to duplicate the issue, etc.) so that anybody can verify.

Good Luck,

Well.. the fact that the same exact code has two different results is quite strange… above all if for a moment it worked…

to me gives “Failed” on “fopen”

from fs_nano33ble.

Hi @Sladerix

FYI, the new FS_Nano33BLE v1.2.1 has just been published to support more boards such as SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE, etc. using Seeeduino mbed core

Best Regards,

Releases v1.2.1

1. Add support to Seeeduino nRF52840-based boards such as SEEED_XIAO_NRF52840 and SEEED_XIAO_NRF52840_SENSE, etc. using Seeeduino mbed core
2. Add astyle using allman style. Restyle the library
3. Display compile warning only when _FS_LOGLEVEL_ > 3

Thank you very much for the effort!!

Unfortunately the class source code I uploaded in the first post still gives this error:

At the moment I'm dealing with it by simply not wrapping it into a class, but putting the various functions in the main code (like in the example).
I would like to have a functioning class to have the code more tidy and simply to read (and more important, modular to use than in other projects)

At the moment I'm working on a project where I've to be fast to finish.. so for now I will leave it like that, in future i can look more deep and hope to find something

Thank you

from fs_nano33ble.