Comments (13)
k3ng
commented on June 19, 2024
What options and settings do you have configured?
…On Tue, Feb 20, 2018 at 4:43 PM, maxmiztejm ***@***.***> wrote:
Hello K3NG!
I trying make an your controller with 16x2 Display.
The head is shown in this way:
Azimuth XXX.X
zimuth XXX.X
The XXX.X are same in both rows. AZ/EL control feature is enabled. Problem
is, that is no Elevation XXX.X text on the second row. Do you have any
idea, where is the problem? Thank you!
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#46>, or mute the
thread
<https://github.com/notifications/unsubscribe-auth/ADLacFux2h7jjFyuqexLbuPYnJewXxhXks5tWzyYgaJpZM4SMt19>
.
from k3ng_rotator_controller.
maxmiztejm
commented on June 19, 2024
#define OPTION_DISPLAY_STATUS
#define OPTION_DISPLAY_HEADING
#define OPTION_DISPLAY_HEADING_AZ_ONLY
#define OPTION_DISPLAY_HEADING_EL_ONLY
#define FEATURE_4_BIT_LCD_DISPLAY
#define LCD_COLUMNS 16
#define LCD_ROWS 2
from k3ng_rotator_controller.
k3ng
commented on June 19, 2024
I also need to see the settings you have for the various rows, like these:
#define LCD_HEADING_ROW 2
#define LCD_HEADING_FIELD_SIZE 20
#define LCD_AZ_ONLY_HEADING_ROW 1
#define LCD_AZ_ONLY_HEADING_FIELD_SIZE 20
#define LCD_EL_ONLY_HEADING_ROW 2
#define LCD_EL_ONLY_HEADING_FIELD_SIZE 20
#define LCD_STATUS_ROW 1
#define LCD_STATUS_FIELD_SIZE 20
However, not knowing these, I would say turn off OPTION_DISPLAY_HEADING
because it's likely it's interfering with OPTION_DISPLAY_HEADING_EL_ONLY if
you're using the default settings.
…On Wed, Feb 21, 2018 at 4:15 AM, maxmiztejm ***@***.***> wrote:
#define OPTION_DISPLAY_STATUS
#define OPTION_DISPLAY_HEADING
#define OPTION_DISPLAY_HEADING_AZ_ONLY
#define OPTION_DISPLAY_HEADING_EL_ONLY
#define FEATURE_4_BIT_LCD_DISPLAY
#define LCD_COLUMNS 16
#define LCD_ROWS 2
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#46 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADLacEknNkYTUkNQlw2HFD38o2M5XqeJks5tW97CgaJpZM4SMt19>
.
from k3ng_rotator_controller.
maxmiztejm
commented on June 19, 2024
I already, try this. But no text: Elevation XXX.X is displayed.
from k3ng_rotator_controller.
k3ng
commented on June 19, 2024
Do this:
#define OPTION_DISPLAY_STATUS
#define OPTION_DISPLAY_HEADING
// #define OPTION_DISPLAY_HEADING_AZ_ONLY
// #define OPTION_DISPLAY_HEADING_EL_ONLY
Or this:
// #define OPTION_DISPLAY_STATUS
// #define OPTION_DISPLAY_HEADING
#define OPTION_DISPLAY_HEADING_AZ_ONLY
#define OPTION_DISPLAY_HEADING_EL_ONLY
You have only two rows to work with, so there are conflicts occurring.
…On Wed, Feb 21, 2018 at 7:35 AM, maxmiztejm ***@***.***> wrote:
I already, try this. But no text: Elevation XXX.X is displayed.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#46 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADLacJpx0F7U_c8S4GHjzJRM_Sq9l6Lxks5tXA2fgaJpZM4SMt19>
.
from k3ng_rotator_controller.
maxmiztejm
commented on June 19, 2024
First option: displayed Azimuth XXX.X on the second row.
Second option: displayed Azimuth XXX.X on the first row.
from k3ng_rotator_controller.
maxmiztejm
commented on June 19, 2024
Mine settings
#define LCD_COLUMNS 16 // Zmena! //20
#define LCD_ROWS 2 // Zmena! //2 // this is automatically set below for HARDWARE_EA4TX_ARS_USB and HARDWARE_M0UPU
#define LCD_UPDATE_TIME 1000 // LCD update time in milliseconds
#define LCD_HHMM_CLOCK_POSITION LEFT //LEFT or RIGHT
#define LCD_HHMMSS_CLOCK_POSITION LEFT //LEFT or RIGHT
#define LCD_ALT_HHMM_CLOCK_AND_MAIDENHEAD_POSITION LEFT
#define LCD_ALT_HHMM_CLOCK_AND_MAIDENHEAD_ROW 1
#define LCD_CONSTANT_HHMMSS_CLOCK_AND_MAIDENHEAD_POSITION CENTER
#define LCD_CONSTANT_HHMMSS_CLOCK_AND_MAIDENHEAD_ROW 3
#define LCD_BIG_CLOCK_ROW 4
#define LCD_GPS_INDICATOR_POSITION RIGHT //LEFT or RIGHT
#define LCD_GPS_INDICATOR_ROW 1
#define LCD_MOON_TRACKING_ROW 3 // LCD display row for OPTION_DISPLAY_MOON_TRACKING_CONTINUOUSLY
#define LCD_MOON_TRACKING_UPDATE_INTERVAL 5000
#define LCD_SUN_TRACKING_ROW 4 // LCD display row for OPTION_DISPLAY_SUN_TRACKING_CONTINUOUSLY
#define LCD_SUN_TRACKING_UPDATE_INTERVAL 5000
#define LCD_MOON_OR_SUN_TRACKING_CONDITIONAL_ROW 3 // LCD display row for OPTION_DISPLAY_MOON_OR_SUN_TRACKING_CONDITIONAL
#define SPLASH_SCREEN_TIME 3000
#define LCD_HEADING_ROW 2
#define LCD_HEADING_FIELD_SIZE 20
#define LCD_AZ_ONLY_HEADING_ROW 1
#define LCD_AZ_ONLY_HEADING_FIELD_SIZE 20
#define LCD_EL_ONLY_HEADING_ROW 2
#define LCD_EL_ONLY_HEADING_FIELD_SIZE 20
#define LCD_STATUS_ROW 1
#define LCD_STATUS_FIELD_SIZE 20
#define LCD_DIRECTION_ROW 1
#define LCD_HHMMSS_CLOCK_ROW 1
#define LCD_HHMM_CLOCK_ROW 1
#define PARKING_STATUS_DISPLAY_TIME_MS 5000
from k3ng_rotator_controller.
k3ng
commented on June 19, 2024
How much local variable space do you have available (shown at compile time)?
…On Wed, Feb 21, 2018 at 7:43 AM, maxmiztejm ***@***.***> wrote:
Mine settings
#define LCD_COLUMNS 16 // Zmena! //20
#define LCD_ROWS 2 // Zmena! //2 // this is automatically set below for
HARDWARE_EA4TX_ARS_USB and HARDWARE_M0UPU
#define LCD_UPDATE_TIME 1000 // LCD update time in milliseconds
#define LCD_HHMM_CLOCK_POSITION LEFT //LEFT or RIGHT
#define LCD_HHMMSS_CLOCK_POSITION LEFT //LEFT or RIGHT
#define LCD_ALT_HHMM_CLOCK_AND_MAIDENHEAD_POSITION LEFT
#define LCD_ALT_HHMM_CLOCK_AND_MAIDENHEAD_ROW 1
#define LCD_CONSTANT_HHMMSS_CLOCK_AND_MAIDENHEAD_POSITION CENTER
#define LCD_CONSTANT_HHMMSS_CLOCK_AND_MAIDENHEAD_ROW 3
#define LCD_BIG_CLOCK_ROW 4
#define LCD_GPS_INDICATOR_POSITION RIGHT //LEFT or RIGHT
#define LCD_GPS_INDICATOR_ROW 1
#define LCD_MOON_TRACKING_ROW 3 // LCD display row for
OPTION_DISPLAY_MOON_TRACKING_CONTINUOUSLY
#define LCD_MOON_TRACKING_UPDATE_INTERVAL 5000
#define LCD_SUN_TRACKING_ROW 4 // LCD display row for
OPTION_DISPLAY_SUN_TRACKING_CONTINUOUSLY
#define LCD_SUN_TRACKING_UPDATE_INTERVAL 5000
#define LCD_MOON_OR_SUN_TRACKING_CONDITIONAL_ROW 3 // LCD display row for
OPTION_DISPLAY_MOON_OR_SUN_TRACKING_CONDITIONAL
#define SPLASH_SCREEN_TIME 3000
#define LCD_HEADING_ROW 2
#define LCD_HEADING_FIELD_SIZE 20
#define LCD_AZ_ONLY_HEADING_ROW 1
#define LCD_AZ_ONLY_HEADING_FIELD_SIZE 20
#define LCD_EL_ONLY_HEADING_ROW 2
#define LCD_EL_ONLY_HEADING_FIELD_SIZE 20
#define LCD_STATUS_ROW 1
#define LCD_STATUS_FIELD_SIZE 20
#define LCD_DIRECTION_ROW 1
#define LCD_HHMMSS_CLOCK_ROW 1
#define LCD_HHMM_CLOCK_ROW 1
#define PARKING_STATUS_DISPLAY_TIME_MS 5000
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#46 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADLacFuPwGJiywI6-yA9cTv69bCIVOePks5tXA-CgaJpZM4SMt19>
.
from k3ng_rotator_controller.
maxmiztejm
commented on June 19, 2024
75% are available
from k3ng_rotator_controller.
k3ng
commented on June 19, 2024
How many bytes for local variables?
…On Wed, Feb 21, 2018 at 7:49 AM, maxmiztejm ***@***.***> wrote:
75% are available
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#46 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADLacAebUrRVP1kPuX9IXwWWN7nI0nMUks5tXBDQgaJpZM4SMt19>
.
from k3ng_rotator_controller.
maxmiztejm
commented on June 19, 2024
leaving 6087 bytes for local variables
from k3ng_rotator_controller.
maxmiztejm
commented on June 19, 2024
Problem solved.
I forget change FEATURE_ELEVATION_CONTROL setting. Now it works. Thank you!
from k3ng_rotator_controller.
k3ng
commented on June 19, 2024
Ah, OK. I'm going to add some code to prevent this in the future for
others.
73
Goody
K3NG
…On Wed, Feb 21, 2018 at 8:08 AM, maxmiztejm ***@***.***> wrote:
Problem solved.
I forget change FEATURE_ELEVATION_CONTROL setting. Now it works. Thank you!
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#46 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/ADLacPedprdl0RWBSilt8mgRzrx7V265ks5tXBVWgaJpZM4SMt19>
.
from k3ng_rotator_controller.
Related Issues (20)
- Rotor Controller
- Oops! That page can’t be found.
- Fatal error: EEPROM.h: No such file or directory HOT 1
- Sketch too big - text section exceeds available space in board HOT 2
- Support for TMC2209 / TMC 5160 spi / uart mode drivers
- Preset potentiometer bug
- Feature request "Go To" HOT 4
- Problem Integrating GY-NEO-6M with K3NG Rotator Controller HOT 2
- Feature request: support for a PCA9555 I2C I/O expander
- feature request: support for Picoborg reverse and Diablo motor control boards
- Ham Radio Deluxe & Yaesu G-1000DXC HOT 1
- Run on blind rotator
- Position Pulse input on Slave unit
- K3NG Rotator Controller
- How to get the basic setting for Azimuth possition configured using the Yaesu GS-232A/B with simple potentiometer HOT 1
- Accurate Calibration HOT 4
- PstRotator only turns right
- Arduino EVERY
- RemoteQTH K3NG V3.3 Rotator Controller
- Relay control in pstrotator az+el
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from k3ng_rotator_controller.