"Getting Answer" from Sonoff-devices about sonoffhmlox HOT 4 CLOSED

It's implemented by default.

If you configure your CUxD channel as described in the Wiki, you have a callback.

1.) If someone toggles the state on the device (pressing the momentary switch), the state will be set to the CUxD channel.

2.) If you change the state of your sonoff device by http command the state will be set to the CUxD channel (if you append the option ?ts=1 )

The channel always represents the current state of the sonoff device.

XML-API is not needed.

from sonoffhmlox.

Thanks a lot for answering so fast ...
... and for bringing such good news. I have bought some S20-devices. If they will arrive, I will test it!

In the tasmota software there is a blink-feature which allows you to set up an on-time like a light in the stairway. Is something like that also possible? Or do I have to implement this by using the CCU?

In the end I like to ask if the following devices are supported:

• Sonoff Basic
• Sonoff Dual (R2)

Regards
Joe

from sonoffhmlox.

The SonoffHMLOX has only a few features. The idea of writing this firmware came up because I needed an active callback or bidirectional communication between the sonoff and the ccu.

The only features are on/off and a timer.

Supported devices are (as mentioned in the README):

• Sonoff Switch (Basic)
• S20
• SV
• Touch (1Gang)
• POW

For the Dual and Dual R2 as a dual switch, please refer to this repository: SonoffDualHVIOHMLOX

For the Dual and Dual R2 as an shutter actor, please refer to this repository: SonoffDualShutterHMLOX

from sonoffhmlox.

THANKS!!!!
I'll try your work, as soon as my devices will arrive!
Regards
Joe

from sonoffhmlox.