Incorrect metrics reported by the app about xdripswift HOT 3 CLOSED

This is working correctly.

Please note the number at the bottom of the screen in the KPI section next to low (<60) and high (>140).

However, your chart is set to show low as <70 and high as >180. This is the reason for the disconnect.

Please go to "Settings > Statistics > Time in Range Type" and set this to "User Range".

Your KPI metrics should then match your chart display.

from xdripswift.

In addition to that (although this might be a different issue to be created), I'm not sure who updated the translations for Spanish, but "In Range" has changed to "Estrecho", and that makes absolutely no sense. It should be changed back to whatever it was before (I'm assuming we had something like "En Rango" but cannot remember).

I translated them so there is a good chance as I usually make mistakes :)

But in this case, it is working correctly. We made changes back in December 2023 to add new calculation methods:

https://github.com/JohanDegraeve/xdripswift/releases/tag/5.0.0

So now there are 3 calculation types:

• Time In Range (En rango) 70-180 mg/dL
• Time in Tight Range (Estrecho) -> 70-140mg/dL
• User-defined -> based upon user high/low objectives from the Settings menu

https://diatribe.org/time-tight-range-new-diabetes-goal

As @OliNix says, you can choose which calculation you want to use in the Settings screen, or you can just double-tap the "In Range" label and it will cycle through them directly from the Home Screen and dynamically update all calculations.

@sergiotome , please confirm and close the issue if you agree. 👍

from xdripswift.

Closing...

from xdripswift.