Please wait, retrieving current mesh. about octoprint-bedlevelvisualizer HOT 35 CLOSED

@jneilliii @tonyccol with G81 everything works!!!!

Thank you so much for the help!!!! Keep it up!

from octoprint-bedlevelvisualizer.

@J-charles-C, I have made some significant improvements in the data collector process in my upcoming 0.1.0 release that eliminates the need for the data collector flag and may have better results for you as well, Can you install the plugin from the URL below and report back if there is any change for you? If not please copy/paste the terminal output after pressing the update button.

https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/0.1.0.zip

from octoprint-bedlevelvisualizer.

Awesome. I'm waiting on some additional testing results prior to full release, but looks like this fixed it for you.

from octoprint-bedlevelvisualizer.

I'd have to see the standard results you get when issuing a G29 T to tell you. More than likely, you just have the Data Collector Flag setting incorrect relative to your report output.

from octoprint-bedlevelvisualizer.

Hi,

thank you so much for have make this plug-in!
But i think there are some problems with the data transmission.

This is the output printed by the terminal:

Send: G28
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: clean up finished
Recv: babystep applied
Recv: Bed leveling correction finished
Recv: Upsample finished
Recv: Mesh bed leveling activated
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: Go home finished
Recv: ok
Send: G29 T
Recv: ok

I have an Original Prusa Mk2s with the lastest firmware... What i should try do?

from octoprint-bedlevelvisualizer.

I,

Recv: echo:busy: processing
Recv: Bilinear Leveling Grid:
Recv: 0 1 2
Recv: 0 -0.187 +0.015 +0.198
Recv: 1 -0.176 +0.000 +0.059
Recv: 2 -0.260 -0.274 -0.203
Recv:
Recv: X:182.00 Y:199.00 Z:16.38 E:0.00 Count A:30594 B:-1394 Z:6429
Recv: ok

from octoprint-bedlevelvisualizer.

@4ntani, replace the gcode script commands in the plugin's settings and enable prusa firmware option. Make sure to set the data collector flag to Measured points:.

from octoprint-bedlevelvisualizer.

@J-charles-C, everything looks correct. Are there any errors in browser console or octoprint.log?

from octoprint-bedlevelvisualizer.

@jneilliii @4ntani Replace the gcode script commands with what? i have the MK2s as well and am trying to get this plugin to work

from octoprint-bedlevelvisualizer.

When i install or uninstall the plugin, i have this message

Log and terminal are OK.

In terminal : -bash: pip install --upgrade pip: command not found

best

from octoprint-bedlevelvisualizer.

Ok, for PIP update :

/home/pi/oprint/bin/python -m pip install --upgrade pip

But same problem with the plug in : Please wait, retrieving current mesh.

best

from octoprint-bedlevelvisualizer.

@4ntani, @tonyccol: how about using the Prusa Firmware commands for bed leveling (G80) and bed leveling report (G81)?

from octoprint-bedlevelvisualizer.

@J-charles-C, pip is unrelated to the plugin issue you are having. Looks like you tried uninstalling re-installing. Do you see any errors in your ocotprint.log or browser's console when you try to update the mesh or switch to the tab?

from octoprint-bedlevelvisualizer.

octoprint.log
No error.

best

from octoprint-bedlevelvisualizer.

That's really strange then. Potentially a localization issue. Can you try going to the main page (not in this plugins tab) and press CTRL+F5. Once reloaded press F12 to open developer tools and then on the console tab in developer tools active switch to this plugin's tab. Are there any errors shown in the console? It will also spit out write out the mesh data there once it's detected.

from octoprint-bedlevelvisualizer.

@J-charles-C, any luck?

from octoprint-bedlevelvisualizer.

I,

I test tommorow. I work between tree days.

best

from octoprint-bedlevelvisualizer.

I jneilliii,

With the last version, i have this message :
TypeError: undefined is not an object (evaluating 's[0].length')

Erase cache and other test don't resolve my problem

best

from octoprint-bedlevelvisualizer.

J-charles-C , if you are using Marlin or a similare bord, install the latest version solved the problem on my side.

from octoprint-bedlevelvisualizer.

I, i have the lastest marlin 1.1.8

best

from octoprint-bedlevelvisualizer.

Can you upload the plugin settings stored in config.yaml?

from octoprint-bedlevelvisualizer.

I,

  bedlevelvisualizer:
    command: 'M155 S30

      G28

      G29 T

      M155 S3'
    mesh_timestamp: 20/04/2018 à 20:20:51
    report_flag: 'Bilinear Leveling Grid: '

best

from octoprint-bedlevelvisualizer.

Thanks, try taking the trailing space out of your Data Collector Flag in settings.

from octoprint-bedlevelvisualizer.

I,

I have cut the space after the ":". No more success

best

from octoprint-bedlevelvisualizer.

I,

Install 0.1.0

Installation du plugin depuis https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/0.1.0.zip...
/home/pi/oprint/bin/python -m pip install https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/0.1.0.zip
Collecting https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/0.1.0.zip
Downloading https://github.com/jneilliii/OctoPrint-BedLevelVisualizer/archive/0.1.0.zip
Requirement already satisfied: OctoPrint in /home/pi/oprint/lib/python2.7/site-packages (from Bed-Visualizer==0.1.0) (1.3.8)
Requirement already satisfied: flask<0.11,>=0.9 in /home/pi/oprint/lib/python2.7/site-packages/Flask-0.10.1-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.10.1)
Requirement already satisfied: Jinja2<2.9,>=2.8 in /home/pi/oprint/lib/python2.7/site-packages/Jinja2-2.8.1-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (2.8.1)
Requirement already satisfied: werkzeug<0.9,>=0.8.3 in /home/pi/oprint/lib/python2.7/site-packages/Werkzeug-0.8.3-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.8.3)
Requirement already satisfied: tornado==4.0.2 in /home/pi/oprint/lib/python2.7/site-packages/tornado-4.0.2-py2.7-linux-armv7l.egg (from OctoPrint->Bed-Visualizer==0.1.0) (4.0.2)
Requirement already satisfied: sockjs-tornado<1.1,>=1.0.3 in /home/pi/oprint/lib/python2.7/site-packages/sockjs_tornado-1.0.3-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.0.3)
Requirement already satisfied: PyYAML<3.11,>=3.10 in /home/pi/oprint/lib/python2.7/site-packages/PyYAML-3.10-py2.7-linux-armv7l.egg (from OctoPrint->Bed-Visualizer==0.1.0) (3.10)
Requirement already satisfied: Flask-Login<0.3,>=0.2.2 in /home/pi/oprint/lib/python2.7/site-packages/Flask_Login-0.2.11-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.2.11)
Requirement already satisfied: Flask-Principal<0.4,>=0.3.5 in /home/pi/oprint/lib/python2.7/site-packages/Flask_Principal-0.3.5-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.3.5)
Requirement already satisfied: Flask-Babel<0.10,>=0.9 in /home/pi/oprint/lib/python2.7/site-packages/Flask_Babel-0.9-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.9)
Requirement already satisfied: Flask-Assets<0.11,>=0.10 in /home/pi/oprint/lib/python2.7/site-packages/Flask_Assets-0.10-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.10)
Requirement already satisfied: markdown<2.7,>=2.6.4 in /home/pi/oprint/lib/python2.7/site-packages/Markdown-2.6.8-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (2.6.8)
Requirement already satisfied: pyserial<3.5,>=2.7 in /home/pi/oprint/lib/python2.7/site-packages/pyserial-2.7-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (2.7)
Requirement already satisfied: netaddr<0.8,>=0.7.17 in /home/pi/oprint/lib/python2.7/site-packages/netaddr-0.7.19-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.7.19)
Requirement already satisfied: watchdog<0.9,>=0.8.3 in /home/pi/oprint/lib/python2.7/site-packages/watchdog-0.8.3-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.8.3)
Requirement already satisfied: sarge<0.2,>=0.1.4 in /home/pi/oprint/lib/python2.7/site-packages/sarge-0.1.4-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.1.4)
Requirement already satisfied: netifaces<0.11,>=0.10 in /home/pi/oprint/lib/python2.7/site-packages/netifaces-0.10.6-py2.7-linux-armv7l.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.10.6)
Requirement already satisfied: pylru<1.1,>=1.0.9 in /home/pi/oprint/lib/python2.7/site-packages/pylru-1.0.9-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.0.9)
Requirement already satisfied: rsa<3.3,>=3.2 in /home/pi/oprint/lib/python2.7/site-packages/rsa-3.2.3-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (3.2.3)
Requirement already satisfied: pkginfo<1.3,>=1.2.1 in /home/pi/oprint/lib/python2.7/site-packages/pkginfo-1.2.1-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.2.1)
Requirement already satisfied: requests<3,>=2.18.4 in /home/pi/oprint/lib/python2.7/site-packages/requests-2.18.4-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (2.18.4)
Requirement already satisfied: semantic_version<2.5,>=2.4.2 in /home/pi/oprint/lib/python2.7/site-packages/semantic_version-2.4.2-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (2.4.2)
Requirement already satisfied: psutil==5.4.3 in /home/pi/oprint/lib/python2.7/site-packages/psutil-5.4.3-py2.7-linux-armv7l.egg (from OctoPrint->Bed-Visualizer==0.1.0) (5.4.3)
Requirement already satisfied: Click<6.3,>=6.2 in /home/pi/oprint/lib/python2.7/site-packages/click-6.2-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (6.2)
Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /home/pi/oprint/lib/python2.7/site-packages/awesome_slugify-1.6.5-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.6.5)
Requirement already satisfied: feedparser<5.3,>=5.2.1 in /home/pi/oprint/lib/python2.7/site-packages/feedparser-5.2.1-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (5.2.1)
Requirement already satisfied: chainmap<1.1,>=1.0.2 in /home/pi/oprint/lib/python2.7/site-packages/chainmap-1.0.2-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.0.2)
Requirement already satisfied: future<0.16,>=0.15 in /home/pi/oprint/lib/python2.7/site-packages/future-0.15.2-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.15.2)
Requirement already satisfied: scandir<1.4,>=1.3 in /home/pi/oprint/lib/python2.7/site-packages/scandir-1.3-py2.7-linux-armv7l.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.3)
Requirement already satisfied: websocket-client<0.41,>=0.40 in /home/pi/oprint/lib/python2.7/site-packages/websocket_client-0.40.0-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.40.0)
Requirement already satisfied: python-dateutil<2.7,>=2.6 in /home/pi/oprint/lib/python2.7/site-packages/python_dateutil-2.6.0-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (2.6.0)
Requirement already satisfied: wrapt<1.11,>=1.10.10 in /home/pi/oprint/lib/python2.7/site-packages/wrapt-1.10.11-py2.7-linux-armv7l.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.10.11)
Requirement already satisfied: futures<3.2,>=3.1.1 in /home/pi/oprint/lib/python2.7/site-packages/futures-3.1.1-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (3.1.1)
Requirement already satisfied: emoji<0.5,>=0.4.5 in /home/pi/oprint/lib/python2.7/site-packages/emoji-0.4.5-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (0.4.5)
Requirement already satisfied: monotonic<1.4,>=1.3 in /home/pi/oprint/lib/python2.7/site-packages/monotonic-1.3-py2.7.egg (from OctoPrint->Bed-Visualizer==0.1.0) (1.3)
Requirement already satisfied: frozendict<1.3,>=1.2 in /home/pi/oprint/lib/python2.7/site-packages (from OctoPrint->Bed-Visualizer==0.1.0) (1.2)
Requirement already satisfied: itsdangerous>=0.21 in /home/pi/oprint/lib/python2.7/site-packages/itsdangerous-0.24-py2.7.egg (from flask<0.11,>=0.9->OctoPrint->Bed-Visualizer==0.1.0) (0.24)
Requirement already satisfied: MarkupSafe in /home/pi/oprint/lib/python2.7/site-packages/MarkupSafe-1.0-py2.7-linux-armv7l.egg (from Jinja2<2.9,>=2.8->OctoPrint->Bed-Visualizer==0.1.0) (1.0)
Requirement already satisfied: certifi in /home/pi/oprint/lib/python2.7/site-packages/certifi-2017.04.17-py2.7.egg (from tornado==4.0.2->OctoPrint->Bed-Visualizer==0.1.0) (2017.4.17)
Requirement already satisfied: backports.ssl_match_hostname in /home/pi/oprint/lib/python2.7/site-packages/backports.ssl_match_hostname-3.5.0.1-py2.7.egg (from tornado==4.0.2->OctoPrint->Bed-Visualizer==0.1.0) (3.5.0.1)
Requirement already satisfied: blinker in /home/pi/oprint/lib/python2.7/site-packages/blinker-1.4-py2.7.egg (from Flask-Principal<0.4,>=0.3.5->OctoPrint->Bed-Visualizer==0.1.0) (1.4)
Requirement already satisfied: Babel>=1.0 in /home/pi/oprint/lib/python2.7/site-packages/Babel-2.4.0-py2.7.egg (from Flask-Babel<0.10,>=0.9->OctoPrint->Bed-Visualizer==0.1.0) (2.4.0)
Requirement already satisfied: speaklater>=1.2 in /home/pi/oprint/lib/python2.7/site-packages/speaklater-1.3-py2.7.egg (from Flask-Babel<0.10,>=0.9->OctoPrint->Bed-Visualizer==0.1.0) (1.3)
Requirement already satisfied: webassets>=0.10 in /home/pi/oprint/lib/python2.7/site-packages/webassets-0.12.1-py2.7.egg (from Flask-Assets<0.11,>=0.10->OctoPrint->Bed-Visualizer==0.1.0) (0.12.1)
Requirement already satisfied: argh>=0.24.1 in /home/pi/oprint/lib/python2.7/site-packages/argh-0.26.2-py2.7.egg (from watchdog<0.9,>=0.8.3->OctoPrint->Bed-Visualizer==0.1.0) (0.26.2)
Requirement already satisfied: pathtools>=0.1.1 in /home/pi/oprint/lib/python2.7/site-packages/pathtools-0.1.2-py2.7.egg (from watchdog<0.9,>=0.8.3->OctoPrint->Bed-Visualizer==0.1.0) (0.1.2)
Requirement already satisfied: pyasn1>=0.1.3 in /home/pi/oprint/lib/python2.7/site-packages/pyasn1-0.2.3-py2.7.egg (from rsa<3.3,>=3.2->OctoPrint->Bed-Visualizer==0.1.0) (0.2.3)
Requirement already satisfied: chardet<3.1.0,>=3.0.2 in /home/pi/oprint/lib/python2.7/site-packages/chardet-3.0.4-py2.7.egg (from requests<3,>=2.18.4->OctoPrint->Bed-Visualizer==0.1.0) (3.0.4)
Requirement already satisfied: idna<2.7,>=2.5 in /home/pi/oprint/lib/python2.7/site-packages/idna-2.6-py2.7.egg (from requests<3,>=2.18.4->OctoPrint->Bed-Visualizer==0.1.0) (2.6)
Requirement already satisfied: urllib3<1.23,>=1.21.1 in /home/pi/oprint/lib/python2.7/site-packages/urllib3-1.22-py2.7.egg (from requests<3,>=2.18.4->OctoPrint->Bed-Visualizer==0.1.0) (1.22)
Requirement already satisfied: regex in /home/pi/oprint/lib/python2.7/site-packages/regex-2017.06.23-py2.7-linux-armv7l.egg (from awesome-slugify<1.7,>=1.6.5->OctoPrint->Bed-Visualizer==0.1.0) (2017.6.23)
Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /home/pi/oprint/lib/python2.7/site-packages/Unidecode-0.04.20-py2.7.egg (from awesome-slugify<1.7,>=1.6.5->OctoPrint->Bed-Visualizer==0.1.0) (0.4.20)
Requirement already satisfied: six in /home/pi/oprint/lib/python2.7/site-packages/six-1.10.0-py2.7.egg (from websocket-client<0.41,>=0.40->OctoPrint->Bed-Visualizer==0.1.0) (1.10.0)
Requirement already satisfied: pytz>=0a in /home/pi/oprint/lib/python2.7/site-packages/pytz-2017.2-py2.7.egg (from Babel>=1.0->Flask-Babel<0.10,>=0.9->OctoPrint->Bed-Visualizer==0.1.0) (2017.2)
Installing collected packages: Bed-Visualizer
Found existing installation: Bed-Visualizer 0.0.8
Uninstalling Bed-Visualizer-0.0.8:
Successfully uninstalled Bed-Visualizer-0.0.8
Running setup.py install for Bed-Visualizer: started
Running setup.py install for Bed-Visualizer: finished with status 'done'
Successfully installed Bed-Visualizer-0.1.0
Terminé !

from octoprint-bedlevelvisualizer.

Many Thanks for your help and this plugin !!!!!!

best

Jc

from octoprint-bedlevelvisualizer.

For 0.1.0 development :

I,

Mesh graphic don't update with the G29 data. I view only the first created. Control-F5 don't change that.

best

from octoprint-bedlevelvisualizer.

So when you press the update button it doesn't retrieve the mesh and update, gets stuck on previously stored mesh?

from octoprint-bedlevelvisualizer.

Yes it's exactly my problem.

And "Stored Mesh Data:" in parameters don't update too.

best

from octoprint-bedlevelvisualizer.

Try this...if you have multiple commands in your GCODE setting, place the text @BEDLEVELVISUALIZER just above the G29 command...like this.

What is happening is the collector stops when it receives an ok command, and if that flag isn't in the gcode you enter the ok is coming earlier than expected.

from octoprint-bedlevelvisualizer.

I,

Its Ok. I have new mesh data and new graphic.

best

from octoprint-bedlevelvisualizer.

Great idea for a plugin!

Unfortunately, I seem to be stuck with perhaps a similar issue? The bed visualizer issues the commands but never receives any data.

Info on my system:
Tronxy p802ma running Marlin 1.0
OctoPrint 1.3.9
Browser is Chrome

This screen stays present after bed leveling completes...

Here are the commands I use...

This is what terminal is reporting...

Console log from Chrome...

Any help is much appreciated - thanks!

from octoprint-bedlevelvisualizer.

It looks like your printer is either using an old marlin version or smoothieware. The plugin unfortunately does not support the report that is coming back at this time.

from octoprint-bedlevelvisualizer.

Thank you - that makes sense and all the more confirms my decision to replace the controller board with something more modern.

from octoprint-bedlevelvisualizer.

Some other users are getting that same report, #74. I'm going to try and work this out for you guys this weekend.

from octoprint-bedlevelvisualizer.