这就是部分报错代码和报错信息 about deqsci HOT 4 OPEN

看报错信息是你没有正确读取图片，建议通过断点等方式排查bug。另外，看起来你不是按照readme运行，而是在尝试单独运行test_ffdnet_ipol.py这个文件？

It seems like you may have not properly read the image. I suggest investigating the bug by using breakpoints or similar methods. Additionally, it appears that you are not following the instructions in README, and instead attempting to simply and directly run the "test_ffdnet_ipol.py" file?

from deqsci.

from deqsci.

我根据readme文件 首先进行测试 然后运行代码根据BUG进行了部分如下修改 成功运行后，得到了两张图片 noisy.diff ffdnet.diff 不知道这个对代码的修改和运行结果是否正确，想再咨询您一下 我们是对input的图片进行噪声处理然后得到noisy.png，然后再对这个noisy.png进行降噪处理得到ffdnet.png吗 不知道我理解的这个过程是否正确，希望得到您的解答 在 2023-08-28 23:31:33，"Yaping Zhao" @.> 写道： 看报错信息是你没有正确读取图片，建议通过断点等方式排查bug。另外，看起来你不是按照readme运行，而是在尝试单独运行test_ffdnet_ipol.py这个文件？ It seems like you may have not properly read the image. I suggest investigating the bug by using breakpoints or similar methods. Additionally, it appears that you are not following the instructions in README, and instead attempting to simply and directly run the "test_ffdnet_ipol.py" file? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: @.>

建议按照README的Requirements部分配置环境，并按照Getting started部分运行video_sci_proxgrad.py，程序运行后会输出在几个数据集上的结果，数值与论文一致。

It is recommended to set up the environment according to the "Requirements" section of README and run the "video_sci_proxgrad.py" script as instructed in the "Getting Started" section. Upon running the program, it will generate results on several datasets, and the numerical values should match the results reported in the paper.

from deqsci.

from deqsci.