icarofcb Goto Github PK

2.4ghz-texas-instruments-pcb-antenna

Repository to save my work with TI`s 2.4GHz pcb antenna to be used with Kicad

adc_esp32c3

ADC reading raw and calibrated voltage

atmega328p-nextion-serial

A generic firmware for communication from MCU to Nextion display

atmega328p_timer_adc_bare_metal_code

This is a code for ADC readings with timers and serial printing, a non blocking program, analogRead() and serial print at atmel(microchip) studio.

basic-nextion-esp

A basic program for nextion display usage w/ esp32 on esp-idf

clock-project-w-atmega

clock-project-w-atmega328p

Project for University laboratory

codigo_asm_atmega328_sem

Ainda deve ser testado, codigo pwm, gera 1khz, 500hz e 250hz nas portas D7,D6,D5 respectivamente

curvas-de-torque

Curvas de torque de um motor de rotor bobinado

esp-idf-adc-component-example

A brief example of adc as a component implementation on ESP-IDF using CPP

esp-idf-gpio-component-example

A brief example of gpio component implementation on ESP-IDF with option to enable and disable both pullup and pulldown and also option to install ISR on input

espnow_lr_deepsleep_

This is an example of the basics of ESPNOW protocol, with a sender and a receiver... and some easter eggs hehe...

icarofcb

Config files for my GitHub profile.

jogo-matematica

Jogo de matematica trabalho facul

projeto-leda

Projeto LEDA com Renesas S7G2 SK

pwm-generator-for-blue-pill

A generic frequency PWM generator, a basic software that has the base to create a PWM with a high precision frequency application.

renesas-uart-with-external-interrupt

Description : This is an code that works on Renesas S7G2 SK Evaluation Board. It sends a string through SCI UART 0 each time you press one of the buttons, SW4 or SW5. The string is sent with the name of the pressed button "SW4" or "SW5". With TX short circuited to RX(using a jumper), it receives the string sent by the button's interrupt function, the it validates the information received and blinks the assigned led, LED GREEN for SW4 and LED RED for SW5

smt32f103c8tx-timed-relay

A program that uses registers to program a STM32F1, Blue pill, so that I can time a HIGH signal very accurately.

stm32cubeide_stm32f1_adc_w_nextion

STM32 BLUEPILL firmware developed with STM32 Cube IDE

stm32f103-with-rak3172-and-can-bus

This is a repository for me to develop a stm32cube ide project to work with rak3172 LORA module and CAN bus, also reading onboard temperature

stm32f4_adc_dac_w_nextion

Just a source code for future ADC,DAC,Serial Nextion applications.