Comments (18)
iawia002
commented on July 24, 2024
I don't have a Linux arm64 machine, what's the output of lux -v?
from lux.
mzhboy
commented on July 24, 2024
I don't have a Linux arm64 machine, what's the output of
lux -v?
木有输出，挂那里了，没有下一步
from lux.
iawia002
commented on July 24, 2024
What's your OS (name and version)? I tested it on a Ubuntu 20.04.6 LTS (GNU/Linux 5.4.0-99-generic aarch64) machine, and it works fine:
root@master:~# ./lux -v
lux: version 0.24.0, A fast and simple video downloader.
root@master:~# file lux
lux: ELF 64-bit LSB executable, ARM aarch64, version 1 (SYSV), statically linked, Go BuildID=gV_PsgOoRpL2mjKxWZkd/qOClEr0V4B7CCz5BQ0fT/MsmnJdSRlyCprsgIn-bd/QxfxfylUYMMFUg-IZEwZ, stripped
from lux.
mzhboy
commented on July 24, 2024
root@rpi4b2:/tmp/24# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 22.04.4 LTS
Release: 22.04
Codename: jammy
from lux.
mzhboy
commented on July 24, 2024
好奇怪，在一台 rpi4 上使用
dlv exec ./lux -- -v
命令测试 0.23 版本后，同命令测试 0.24 版本也可以运行了。
于是重启系统再次测试，发现 dlv exec ./lux -- -v 命令，在 0.23 下可以立即得到结果； 0.24 下需要等待几分钟得到结果。之后 ./lux -v 可以立即得到结果。下面贴有价值的 0.24 的日志。
root@rpi4b2:/tmp/24# tar xf lux_0.24.0_Linux_arm64.tar.gz
root@rpi4b2:/tmp/24# ./lux -v
^C
root@rpi4b2:/tmp/24# dlv exec ./lux -- -v
2024-04-22T07:16:14Z error layer=debugger can't find build-id note on binary
panic: runtime error: slice bounds out of range [:2] with length 0goroutine 1 [running]:
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).openSeparateDebugInfo(0x40001408c0, 0x400007c000, 0x400007e000, {0x4000114c60, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:1213 +0x7bc
github.com/go-delve/delve/pkg/proc.loadBinaryInfoElf(0x40001408c0, 0x400007c000, {0xfffff6f7077f, 0x5}, 0x7c260, 0x40000222d0)
github.com/go-delve/delve/pkg/proc/bininfo.go:1297 +0x23c
github.com/go-delve/delve/pkg/proc.loadBinaryInfo(0x40001408c0, 0x400007c000, {0xfffff6f7077f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:671 +0x178
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).AddImage(0x40001408c0, {0xfffff6f7077f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:831 +0x364
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).LoadBinaryInfo(0x40001408c0, {0xfffff6f7077f, 0x5}, 0x7c260, {0x4000114c60, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:662 +0xfc
github.com/go-delve/delve/pkg/proc.NewTarget({0xac0360, 0x4000232120}, 0x4df, {0xabd068, 0x4000074000}, {{0xfffff6f7077f, 0x5}, {0x4000114c60, 0x1, 0x1}, ...})
github.com/go-delve/delve/pkg/proc/target.go:183 +0x98
github.com/go-delve/delve/pkg/proc/native.(*nativeProcess).initialize(0x4000232120, {0xfffff6f7077f, 0x5}, {0x4000114c60, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/native/proc.go:268 +0x104
github.com/go-delve/delve/pkg/proc/native.Launch({0x4000250090, 0x2, 0x3}, {0x9ddb7d, 0x1}, 0x0, {0x4000114c60, 0x1, 0x1}, {0x0, ...}, ...)
github.com/go-delve/delve/pkg/proc/native/proc_linux.go:134 +0x47c
github.com/go-delve/delve/service/debugger.(*Debugger).Launch(0x40001460b0, {0x4000250090, 0x2, 0x3}, {0x9ddb7d, 0x1})
github.com/go-delve/delve/service/debugger/debugger.go:305 +0x484
github.com/go-delve/delve/service/debugger.New(0x4000254000, {0x4000250090, 0x2, 0x3})
github.com/go-delve/delve/service/debugger/debugger.go:190 +0x4cc
github.com/go-delve/delve/service/rpccommon.(*ServerImpl).Run(0x40001107e0)
github.com/go-delve/delve/service/rpccommon/server.go:122 +0xec
github.com/go-delve/delve/cmd/dlv/cmds.execute(0x0, {0x4000250090, 0x2, 0x3}, 0x4000126c30, {0x0, 0x0}, 0x0, {0x4000250090, 0x2, ...}, ...)
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:971 +0xcf0
github.com/go-delve/delve/cmd/dlv/cmds.New.func4(0x4000143b80, {0x4000250090, 0x2, 0x3})
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:252 +0x80
github.com/spf13/cobra.(*Command).execute(0x4000143b80, {0x4000250060, 0x3, 0x3})
github.com/spf13/cobra/command.go:860 +0x650
github.com/spf13/cobra.(*Command).ExecuteC(0x4000142f00)
github.com/spf13/cobra/command.go:974 +0x424
github.com/spf13/cobra.(*Command).Execute(...)
github.com/spf13/cobra/command.go:902
main.main()
github.com/go-delve/delve/cmd/dlv/main.go:24 +0x1e0
root@rpi4b2:/tmp/24# dlv exec ./lux -- -v
2024-04-22T07:16:37Z error layer=debugger can't find build-id note on binary
panic: runtime error: slice bounds out of range [:2] with length 0goroutine 1 [running]:
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).openSeparateDebugInfo(0x400012adc0, 0x4000236000, 0x4000238000, {0x40001accf0, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:1213 +0x7bc
github.com/go-delve/delve/pkg/proc.loadBinaryInfoElf(0x400012adc0, 0x4000236000, {0xfffff066d77f, 0x5}, 0x7c260, 0x4000210200)
github.com/go-delve/delve/pkg/proc/bininfo.go:1297 +0x23c
github.com/go-delve/delve/pkg/proc.loadBinaryInfo(0x400012adc0, 0x4000236000, {0xfffff066d77f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:671 +0x178
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).AddImage(0x400012adc0, {0xfffff066d77f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:831 +0x364
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).LoadBinaryInfo(0x400012adc0, {0xfffff066d77f, 0x5}, 0x7c260, {0x40001accf0, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:662 +0xfc
github.com/go-delve/delve/pkg/proc.NewTarget({0xac0360, 0x4000188510}, 0x59d, {0xabd068, 0x400022e000}, {{0xfffff066d77f, 0x5}, {0x40001accf0, 0x1, 0x1}, ...})
github.com/go-delve/delve/pkg/proc/target.go:183 +0x98
github.com/go-delve/delve/pkg/proc/native.(*nativeProcess).initialize(0x4000188510, {0xfffff066d77f, 0x5}, {0x40001accf0, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/native/proc.go:268 +0x104
github.com/go-delve/delve/pkg/proc/native.Launch({0x40002967b0, 0x2, 0x3}, {0x9ddb7d, 0x1}, 0x0, {0x40001accf0, 0x1, 0x1}, {0x0, ...}, ...)
github.com/go-delve/delve/pkg/proc/native/proc_linux.go:134 +0x47c
github.com/go-delve/delve/service/debugger.(*Debugger).Launch(0x400014cfd0, {0x40002967b0, 0x2, 0x3}, {0x9ddb7d, 0x1})
github.com/go-delve/delve/service/debugger/debugger.go:305 +0x484
github.com/go-delve/delve/service/debugger.New(0x400019e1c0, {0x40002967b0, 0x2, 0x3})
github.com/go-delve/delve/service/debugger/debugger.go:190 +0x4cc
github.com/go-delve/delve/service/rpccommon.(*ServerImpl).Run(0x400007ed20)
github.com/go-delve/delve/service/rpccommon/server.go:122 +0xec
github.com/go-delve/delve/cmd/dlv/cmds.execute(0x0, {0x40002967b0, 0x2, 0x3}, 0x40001c6680, {0x0, 0x0}, 0x0, {0x40002967b0, 0x2, ...}, ...)
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:971 +0xcf0
github.com/go-delve/delve/cmd/dlv/cmds.New.func4(0x40001cf180, {0x40002967b0, 0x2, 0x3})
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:252 +0x80
github.com/spf13/cobra.(*Command).execute(0x40001cf180, {0x4000296780, 0x3, 0x3})
github.com/spf13/cobra/command.go:860 +0x650
github.com/spf13/cobra.(*Command).ExecuteC(0x40001ce500)
github.com/spf13/cobra/command.go:974 +0x424
github.com/spf13/cobra.(*Command).Execute(...)
github.com/spf13/cobra/command.go:902
main.main()
github.com/go-delve/delve/cmd/dlv/main.go:24 +0x1e0
root@rpi4b2:/tmp/24# ./lux -v
^C
root@rpi4b2:/tmp/24# dlv exec ./lux -- -v
2024-04-22T07:17:04Z error layer=debugger can't find build-id note on binary
panic: runtime error: slice bounds out of range [:2] with length 0goroutine 1 [running]:
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).openSeparateDebugInfo(0x40000cedc0, 0x40001c0000, 0x40001c2000, {0x4000158cb0, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:1213 +0x7bc
github.com/go-delve/delve/pkg/proc.loadBinaryInfoElf(0x40000cedc0, 0x40001c0000, {0xfffffa5c177f, 0x5}, 0x7c260, 0x4000198210)
github.com/go-delve/delve/pkg/proc/bininfo.go:1297 +0x23c
github.com/go-delve/delve/pkg/proc.loadBinaryInfo(0x40000cedc0, 0x40001c0000, {0xfffffa5c177f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:671 +0x178
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).AddImage(0x40000cedc0, {0xfffffa5c177f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:831 +0x364
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).LoadBinaryInfo(0x40000cedc0, {0xfffffa5c177f, 0x5}, 0x7c260, {0x4000158cb0, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:662 +0xfc
github.com/go-delve/delve/pkg/proc.NewTarget({0xac0360, 0x40001345a0}, 0x5bf, {0xabd068, 0x40001b8000}, {{0xfffffa5c177f, 0x5}, {0x4000158cb0, 0x1, 0x1}, ...})
github.com/go-delve/delve/pkg/proc/target.go:183 +0x98
github.com/go-delve/delve/pkg/proc/native.(*nativeProcess).initialize(0x40001345a0, {0xfffffa5c177f, 0x5}, {0x4000158cb0, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/native/proc.go:268 +0x104
github.com/go-delve/delve/pkg/proc/native.Launch({0x400024e660, 0x2, 0x3}, {0x9ddb7d, 0x1}, 0x0, {0x4000158cb0, 0x1, 0x1}, {0x0, ...}, ...)
github.com/go-delve/delve/pkg/proc/native/proc_linux.go:134 +0x47c
github.com/go-delve/delve/service/debugger.(*Debugger).Launch(0x40000f2c60, {0x400024e660, 0x2, 0x3}, {0x9ddb7d, 0x1})
github.com/go-delve/delve/service/debugger/debugger.go:305 +0x484
github.com/go-delve/delve/service/debugger.New(0x400014c1c0, {0x400024e660, 0x2, 0x3})
github.com/go-delve/delve/service/debugger/debugger.go:190 +0x4cc
github.com/go-delve/delve/service/rpccommon.(*ServerImpl).Run(0x4000092ea0)
github.com/go-delve/delve/service/rpccommon/server.go:122 +0xec
github.com/go-delve/delve/cmd/dlv/cmds.execute(0x0, {0x400024e660, 0x2, 0x3}, 0x4000170270, {0x0, 0x0}, 0x0, {0x400024e660, 0x2, ...}, ...)
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:971 +0xcf0
github.com/go-delve/delve/cmd/dlv/cmds.New.func4(0x4000231180, {0x400024e660, 0x2, 0x3})
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:252 +0x80
github.com/spf13/cobra.(*Command).execute(0x4000231180, {0x400024e630, 0x3, 0x3})
github.com/spf13/cobra/command.go:860 +0x650
github.com/spf13/cobra.(*Command).ExecuteC(0x4000230500)
github.com/spf13/cobra/command.go:974 +0x424
github.com/spf13/cobra.(*Command).Execute(...)
github.com/spf13/cobra/command.go:902
main.main()
github.com/go-delve/delve/cmd/dlv/main.go:24 +0x1e0
root@rpi4b2:/tmp/24# dlv exec ./lux -- -v
2024-04-22T07:18:05Z error layer=debugger can't find build-id note on binary
panic: runtime error: slice bounds out of range [:2] with length 0goroutine 1 [running]:
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).openSeparateDebugInfo(0x40002b48c0, 0x40001a01c0, 0x40001210e0, {0x4000286c80, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:1213 +0x7bc
github.com/go-delve/delve/pkg/proc.loadBinaryInfoElf(0x40002b48c0, 0x40001a01c0, {0xffffe5aaa77f, 0x5}, 0x7c260, 0x4000022f60)
github.com/go-delve/delve/pkg/proc/bininfo.go:1297 +0x23c
github.com/go-delve/delve/pkg/proc.loadBinaryInfo(0x40002b48c0, 0x40001a01c0, {0xffffe5aaa77f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:671 +0x178
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).AddImage(0x40002b48c0, {0xffffe5aaa77f, 0x5}, 0x7c260)
github.com/go-delve/delve/pkg/proc/bininfo.go:831 +0x364
github.com/go-delve/delve/pkg/proc.(*BinaryInfo).LoadBinaryInfo(0x40002b48c0, {0xffffe5aaa77f, 0x5}, 0x7c260, {0x4000286c80, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/bininfo.go:662 +0xfc
github.com/go-delve/delve/pkg/proc.NewTarget({0xac0360, 0x40003161b0}, 0x5ce, {0xabd068, 0x40001277a0}, {{0xffffe5aaa77f, 0x5}, {0x4000286c80, 0x1, 0x1}, ...})
github.com/go-delve/delve/pkg/proc/target.go:183 +0x98
github.com/go-delve/delve/pkg/proc/native.(*nativeProcess).initialize(0x40003161b0, {0xffffe5aaa77f, 0x5}, {0x4000286c80, 0x1, 0x1})
github.com/go-delve/delve/pkg/proc/native/proc.go:268 +0x104
github.com/go-delve/delve/pkg/proc/native.Launch({0x40003480f0, 0x2, 0x3}, {0x9ddb7d, 0x1}, 0x0, {0x4000286c80, 0x1, 0x1}, {0x0, ...}, ...)
github.com/go-delve/delve/pkg/proc/native/proc_linux.go:134 +0x47c
github.com/go-delve/delve/service/debugger.(*Debugger).Launch(0x40002ba0b0, {0x40003480f0, 0x2, 0x3}, {0x9ddb7d, 0x1})
github.com/go-delve/delve/service/debugger/debugger.go:305 +0x484
github.com/go-delve/delve/service/debugger.New(0x400034c000, {0x40003480f0, 0x2, 0x3})
github.com/go-delve/delve/service/debugger/debugger.go:190 +0x4cc
github.com/go-delve/delve/service/rpccommon.(*ServerImpl).Run(0x4000280780)
github.com/go-delve/delve/service/rpccommon/server.go:122 +0xec
github.com/go-delve/delve/cmd/dlv/cmds.execute(0x0, {0x40003480f0, 0x2, 0x3}, 0x4000296b60, {0x0, 0x0}, 0x0, {0x40003480f0, 0x2, ...}, ...)
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:971 +0xcf0
github.com/go-delve/delve/cmd/dlv/cmds.New.func4(0x40002b7b80, {0x40003480f0, 0x2, 0x3})
github.com/go-delve/delve/cmd/dlv/cmds/commands.go:252 +0x80
github.com/spf13/cobra.(*Command).execute(0x40002b7b80, {0x40003480c0, 0x3, 0x3})
github.com/spf13/cobra/command.go:860 +0x650
github.com/spf13/cobra.(*Command).ExecuteC(0x40002b6f00)
github.com/spf13/cobra/command.go:974 +0x424
github.com/spf13/cobra.(*Command).Execute(...)
github.com/spf13/cobra/command.go:902
main.main()
github.com/go-delve/delve/cmd/dlv/main.go:24 +0x1e0
root@rpi4b2:/tmp/24#
lux: version 0.24.0, A fast and simple video downloader.lux: version 0.24.0, A fast and simple video downloader.
lux: version 0.24.0, A fast and simple video downloader.
root@rpi4b2:/tmp/24# ./lux -v
lux: version 0.24.0, A fast and simple video downloader.
root@rpi4b2:/tmp/24#
lux: version 0.24.0, A fast and simple video downloader.
from lux.
mzhboy
commented on July 24, 2024
测量 0.24 首次输出时间，花费 2m24.369s
root@rpi4b1:/tmp/24# time ./lux -v
lux: version 0.24.0, A fast and simple video downloader.
real 2m24.369s
user 0m3.819s
sys 0m0.760s
root@rpi4b1:/tmp/24# time ./lux -vlux: version 0.24.0, A fast and simple video downloader.
real 0m0.027s
user 0m0.016s
sys 0m0.013s
from lux.
tqfx
commented on July 24, 2024
strace lux on termux 1340.log
~ $ time lux
Run lux failed: too few arguments
real 0m0.034s
user 0m0.005s
sys 0m0.035s
~ $ rm $TMPDIR/fake_useragent_0.2.0.json
~ $ time lux
Run lux failed: too few arguments
real 0m1.813s
user 0m0.064s
sys 0m0.085s
~ $ time lux
Run lux failed: too few arguments
real 0m0.032s
user 0m0.006s
sys 0m0.030sfrom lux.
truboxl
commented on July 24, 2024
Absolute worst case after repeating running lux
$ strace -c ./lux
Run lux failed: too few arguments
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- -------------------
95.78 1.099493 74 14813 10519 rt_sigreturn
1.10 0.012603 157 80 7 futex
0.48 0.005493 23 229 mmap
0.25 0.002862 21 133 mprotect
0.22 0.002509 418 6 4 epoll_ctl
0.20 0.002250 33 67 9 openat
0.19 0.002222 21 104 prctl
0.18 0.002117 23 91 munmap
0.18 0.002042 68 30 rt_sigprocmask
0.18 0.002026 33 60 read
0.15 0.001699 65 26 fcntl
0.12 0.001390 21 65 5 newfstatat
0.11 0.001265 31 40 readlinkat
0.11 0.001224 1224 1 timer_delete
0.10 0.001174 21 55 close
0.10 0.001133 20 55 fstat
0.09 0.001063 265 4 clone
0.08 0.000930 7 124 rt_sigaction
0.08 0.000903 150 6 sched_yield
0.06 0.000701 25 28 23 faccessat
0.06 0.000659 659 1 execve
0.05 0.000520 30 17 pread64
0.03 0.000371 23 16 mremap
0.02 0.000252 126 2 epoll_pwait
0.02 0.000192 21 9 fstatfs
0.01 0.000133 133 1 ioctl
0.01 0.000123 123 1 setitimer
0.01 0.000112 112 1 prlimit64
0.01 0.000088 88 1 nanosleep
0.01 0.000061 20 3 2 madvise
0.00 0.000051 51 1 pipe2
0.00 0.000047 47 1 epoll_create1
0.00 0.000045 22 2 getrandom
0.00 0.000039 39 1 timer_settime
0.00 0.000038 38 1 timer_create
0.00 0.000026 26 1 getpid
0.00 0.000023 23 1 set_tid_address
0.00 0.000020 20 1 sched_getscheduler
0.00 0.000020 20 1 sched_getaffinity
0.00 0.000019 9 2 sigaltstack
0.00 0.000019 19 1 getuid
0.00 0.000000 0 1 gettid
------ ----------- ----------- --------- --------- -------------------
100.00 1.147957 71 16083 10569 totalNote the high amount of rt_sigreturn
Others strace logs also pointing to a lot of SIGURG. But I can't point where is it coming from. v0.23.0...v0.24.0
from lux.
mzhboy
commented on July 24, 2024
test after reboot
root@rpi4b2:/tmp/24# strace -c ./lux -v
lux: version 0.24.0, A fast and simple video downloader.
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ------------------
84.55 3.735430 83 44718 rt_sigreturn
15.19 0.671139 697 962 75 futex
0.09 0.003980 34 114 rt_sigaction
0.06 0.002470 39 62 write
0.03 0.001150 52 22 mmap
0.02 0.000837 139 6 sched_yield
0.01 0.000644 214 3 clone
0.01 0.000375 28 13 fcntl
0.01 0.000354 44 8 rt_sigprocmask
0.01 0.000338 42 8 pread64
0.00 0.000186 186 1 readlinkat
0.00 0.000179 44 4 2 epoll_ctl
0.00 0.000160 40 4 openat
0.00 0.000113 56 2 1 newfstatat
0.00 0.000107 53 2 madvise
0.00 0.000094 94 1 pipe2
0.00 0.000083 41 2 prlimit64
0.00 0.000068 68 1 epoll_create1
0.00 0.000066 33 2 sigaltstack
0.00 0.000047 47 1 ioctl
0.00 0.000047 15 3 close
0.00 0.000043 43 1 fstat
0.00 0.000030 30 1 gettid
0.00 0.000000 0 2 epoll_pwait
0.00 0.000000 0 1 read
0.00 0.000000 0 1 sched_getaffinity
0.00 0.000000 0 1 execve
------ ----------- ----------- --------- --------- ------------------
100.00 4.417940 96 45946 78 total
root@rpi4b2:/tmp/24# strace -c ./lux -v
lux: version 0.24.0, A fast and simple video downloader.
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ------------------
16.29 0.001315 1315 1 execve
13.96 0.001127 53 21 rt_sigreturn
12.66 0.001022 8 114 rt_sigaction
9.91 0.000800 36 22 mmap
6.49 0.000524 174 3 clone
5.92 0.000478 59 8 rt_sigprocmask
5.15 0.000416 32 13 fcntl
4.71 0.000380 47 8 futex
4.04 0.000326 40 8 pread64
3.99 0.000322 80 4 openat
3.87 0.000312 156 2 sched_yield
2.32 0.000187 187 1 readlinkat
2.23 0.000180 45 4 2 epoll_ctl
1.41 0.000114 38 3 close
1.31 0.000106 106 1 pipe2
1.00 0.000081 40 2 prlimit64
0.83 0.000067 22 3 read
0.76 0.000061 61 1 epoll_create1
0.67 0.000054 27 2 madvise
0.56 0.000045 22 2 sigaltstack
0.53 0.000043 21 2 fstat
0.47 0.000038 38 1 sched_getaffinity
0.33 0.000027 27 1 ioctl
0.33 0.000027 13 2 newfstatat
0.25 0.000020 20 1 gettid
0.00 0.000000 0 1 write
------ ----------- ----------- --------- --------- ------------------
100.00 0.008072 34 231 2 total
from lux.
iawia002
commented on July 24, 2024
Please try with v0.24.1, I have bumped the go version to 1.22, hope this is a cross-compile issue
from lux.
arthurqiao
commented on July 24, 2024
Please try with v0.24.1, I have bumped the go version to 1.22, hope this is a cross-compile issue
I updated the v0.24.1 version, and it still takes 2-3 minutes to start for the first time, and the version number is still incorrect, it shows v0.0.0.
from lux.
iawia002
commented on July 24, 2024
Which binary did you download? From https://github.com/iawia002/lux/releases/tag/v0.24.1 here?
NOTE: The version number will only be displayed in the binary file from the release page
from lux.
arthurqiao
commented on July 24, 2024
Which binary did you download? From https://github.com/iawia002/lux/releases/tag/v0.24.1 here?
NOTE: The version number will only be displayed in the binary file from the release page
The early version was installed via Homebrew and updated to v0.24.1 today in the terminal with "brew upgrade lux".
from lux.
arthurqiao
commented on July 24, 2024
Which binary did you download? From https://github.com/iawia002/lux/releases/tag/v0.24.1 here?
NOTE: The version number will only be displayed in the binary file from the release pageThe early version was installed via Homebrew and updated to v0.24.1 today in the terminal with "brew upgrade lux".
Through the following operations, lux can start quickly, but the version number is still incorrect.
- brew uninstall lux
- restart MacBook
- brew install lux
from lux.
HXHGTS
commented on July 24, 2024
升级0.24.1以后，还是同样的问题😂
from lux.
arthurqiao
commented on July 24, 2024
Which binary did you download? From https://github.com/iawia002/lux/releases/tag/v0.24.1 here?
NOTE: The version number will only be displayed in the binary file from the release pageThe early version was installed via Homebrew and updated to v0.24.1 today in the terminal with "brew upgrade lux".
Through the following operations, lux can start quickly, but the version number is still incorrect.
- brew uninstall lux
- restart MacBook
- brew install lux
Regarding the version display, I installed older versions one by one until v0.20.0 would print the correct version number.
Last login: Mon May 6 21:59:16 on ttys001
➜ Safari brew install lux.rb
==> Downloading https://formulae.brew.sh/api/formula.jws.json
##O#- #
Error: Failed to load cask: lux.rb
Cask 'lux' is unreadable: wrong constant name #Class:0x0000000108ae6ad8
Warning: Treating lux.rb as a formula.
==> Downloading https://ghcr.io/v2/homebrew/core/lux/manifests/0.20.0
######################################################################### 100.0%
==> Fetching lux
==> Downloading https://ghcr.io/v2/homebrew/core/lux/blobs/sha256:a9891989617cc3
######################################################################### 100.0%
Warning: lux 0.24.1 is available and more recent than version 0.20.0.
==> Pouring lux--0.20.0.arm64_sonoma.bottle.tar.gz
==> Downloading https://formulae.brew.sh/api/cask.jws.json
#=#=#
🍺 /opt/homebrew/Cellar/lux/0.20.0: 5 files, 23.2MB
==> Running brew cleanup lux...
Disable this behaviour by setting HOMEBREW_NO_INSTALL_CLEANUP.
Hide these hints with HOMEBREW_NO_ENV_HINTS (see man brew).
Removing: /Users/arthurqiao/Library/Caches/Homebrew/lux--0.20.0... (10.9MB)
➜ Safari lux -v
lux: version v0.20.0, A fast and simple video downloader.
from lux.
tqfx
commented on July 24, 2024
$ strace -c lux -v
lux: version v0.0.0, A fast and simple video downloader.
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- -------------------
98.88 2.697803 16 165303 rt_sigreturn
0.20 0.005570 28 198 mmap
0.15 0.004005 32 124 rt_sigaction
0.10 0.002689 76 35 2 futex
0.09 0.002514 20 121 mprotect
0.09 0.002369 29 79 munmap
0.07 0.001995 32 62 5 openat
0.06 0.001660 25 66 5 newfstatat
0.05 0.001485 14 106 prctl
0.05 0.001366 35 38 readlinkat
0.05 0.001271 22 56 close
0.05 0.001238 22 54 fstat
0.04 0.001192 49 24 rt_sigprocmask
0.02 0.000655 34 19 fcntl
0.02 0.000526 8 62 read
0.01 0.000398 39 10 mremap
0.01 0.000376 26 14 pread64
0.01 0.000297 99 3 clone
0.01 0.000174 29 6 fstatfs
0.00 0.000109 27 4 2 epoll_ctl
0.00 0.000099 33 3 madvise
0.00 0.000076 2 28 22 faccessat
0.00 0.000057 57 1 prlimit64
0.00 0.000053 53 1 ioctl
0.00 0.000042 21 2 sigaltstack
0.00 0.000039 39 1 pipe2
0.00 0.000038 38 1 sched_getaffinity
0.00 0.000032 32 1 getuid
0.00 0.000031 15 2 getrandom
0.00 0.000029 29 1 epoll_pwait
0.00 0.000026 26 1 gettid
0.00 0.000026 26 1 epoll_create1
0.00 0.000021 21 1 write
0.00 0.000009 9 1 sched_yield
0.00 0.000000 0 1 set_tid_address
0.00 0.000000 0 1 sched_getscheduler
0.00 0.000000 0 1 getpid
0.00 0.000000 0 1 execve
------ ----------- ----------- --------- --------- -------------------
100.00 2.728270 16 166433 36 total
from lux.
iawia002
commented on July 24, 2024
The early version was installed via Homebrew and updated to v0.24.1 today in the terminal with "brew upgrade lux".
Got it, the install script in homebrew needs an update
from lux.
Related Issues (20)
- options for downloading all videos of a Douyin user?
- 下载错误，可以检测到1080p，但是无法下载对应的流 HOT 2
- [download fail]: the website name SOS
- Download speed seems to be limited
- [download fail]: bilibili 标题过长的视频无法正确下载 HOT 2
- [download fail]: bilibili 被分配到劣质pcdn导致下载失败
- 无法运行lux v0.24.0 HOT 4
- Version 0.24.0 starts up slowly HOT 1
- Why doesn’t lux have a default .conf?|为什么lux没有默认.conf？
- What's the option for renaming the target file? HOT 1
- [download fail]: the website name
- 哔哩哔哩如何设置下载质量 HOT 2
- [download fail]: Unable to parse Douyin link in version 0.24.1, please help
- Instagram Reel video detected as an image
- Version number does not display correctly HOT 1
- 西瓜视频下载失败 HOT 1
- [download fail]:抖音视频下载报错 HOT 6
- [download fail]: 油管不能下载
- 请问软件启动时自动与developers.whatismybrowser.com创建连接并卡顿，我搜索代码没找到whatismybrowser相关的代码，是在哪里引入的呢
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from lux.