video-viewer and led-image-viewer utils displaying noise about rpi-rgb-led-matrix HOT 8 CLOSED

AND, your command ( $ sudo ------------etc------------etc----------ectc ) ?????? Thanks in advance

from rpi-rgb-led-matrix.

im running "sudo ./video-viewer --led-chain=2 --led-parallel=1 --led-limit-refresh=200 -T3 file.mp4"
The output looks correct and not throwing any errors but not actually displaying image

from rpi-rgb-led-matrix.

I suppose, those panels are Adafruit 32x32 1/16 Scan? Why you are using --led-limit-refresh=200, and WHAT POWER SUPPLY are You using... for x2 (TWO) PANELS, You need at lease, a 5V Power Supply of 10A...

from rpi-rgb-led-matrix.

I am using a 5v 10 amp power supply. yes those are the panels I'm using. I'm using the --led-limit-refresh command because it was reccomended in the readme and i've been troubleshooting. All other examples have been working without issues. I've even gotten a different screen mirroring repo to work on my matrices. The utils in this repo are the only thing that has been giving me trouble.

from rpi-rgb-led-matrix.

try, with ONLY x1 ONE panel...

from rpi-rgb-led-matrix.

If you're using the Adafruit HAT, you need to pass the --led-gpio-mapping=adafruit-hat flag.

from rpi-rgb-led-matrix.

That worked perfectly thank you so much!

from rpi-rgb-led-matrix.

That worked perfectly thank you so much!

ONE MOMENT, please, Ho do You get your project run? Your solution, PLEASE, share it... Thanks in advance
(share a video or picture, or both)

from rpi-rgb-led-matrix.