Unifi Network Integration - Unable to remove device about core HOT 5 CLOSED

Final update - as a stopgap i had manually disabled all of the trackers, after re-enabling all of the trackers and restarting again I was able to delete the tracker entities manually one-by-one.

Please consider allowing the configuration options to be selected before the integration is installed, as I'm sure many like me have hundreds of devices on their network and clicking through 100+ items to click delete seems entirely unnecessary.

from core.

Hey there @Kane610, mind taking a look at this issue as it has been labeled with an integration (unifi) you are listed as a code owner for? Thanks!

_{^{(message by CodeOwnersMention)}}

unifi documentation
unifi source
_{^{(message by IssueLinks)}}

from core.

You should set the configuration options of the integration to what you want exposed

from core.

I'm sorry, I cannot find any configuration options. If I click configure by the hub it just gives a pop up for adding a device. If I go to the three dot menu beside that and go to system options, there is just a setting to enable newly added entities and to enable polling.

I see reference to a cog wheel in the documentation, there are no cog wheels present. Advanced options is enabled for the user.

Edit - I found the configuration, the pop up box when you click configure has no indication that clicking next without choosing a device to add continues to configuration pages (number 1-3 after that first pop up). I have unchecked everything in the configuration pages, but all of the devices and trackers are still there after reloading the integration and restarting home assistant. The "Remove device from Unifi network" button still does not do anything on the existing devices, and the device that it does allow me to delete still comes back after a reboot.

from core.

Final update - as a stopgap i had manually disabled all of the trackers, after re-enabling all of the trackers and restarting again I was able to delete the tracker entities manually one-by-one.

Please consider allowing the configuration options to be selected before the integration is installed, as I'm sure many like me have hundreds of devices on their network and clicking through 100+ items to click delete seems entirely unnecessary.

The plan is to go to a opt-in approach

from core.