Comments (13)
home-assistant
commented on September 26, 2024
Hey there @home-assistant/matter, mind taking a look at this issue as it has been labeled with an integration (matter) you are listed as a code owner for? Thanks!
Code owner commands
Code owners of matter can trigger bot actions by commenting:
@home-assistant closeCloses the issue.@home-assistant rename Awesome new titleRenames the issue.@home-assistant reopenReopen the issue.@home-assistant unassign matterRemoves the current integration label and assignees on the issue, add the integration domain after the command.@home-assistant add-label needs-more-informationAdd a label (needs-more-information, problem in dependency, problem in custom component) to the issue.@home-assistant remove-label needs-more-informationRemove a label (needs-more-information, problem in dependency, problem in custom component) on the issue.
(message by CodeOwnersMention)
matter documentation
matter source
(message by IssueLinks)
from core.
hschapitz
commented on September 26, 2024
I had the same problem since I upgraded yesterday. I just restored my latest backup from before upgrading home assistant core to 2024.5.3 and now my matter devices are recognized again
from core.
jamesjhfadler
commented on September 26, 2024
I have a similar issue (bug report #117042) where the latest version changed my leviton D23LP plug in dimmer from a light to a switch, disabling and adding entities. Fortunately my D26HD dimmers did not disable the light entity.
from core.
dhia-e-rzig
commented on September 26, 2024
I have a leviton D23LP plug and can't seem to pair it either. It successfuly paired for 5s showing up as a switch (#117042 ), then stopped working. Attempting to repair it has failed.
from core.
jamesjhfadler
commented on September 26, 2024
I am able to remove the device from the matter server and then re attach it
with no problems.
However, it shows up as a switch, not a light, so it cannot be
dimmed, which is the issue I put up as a bug.
I did the following to remove and add, hope this helps:
1. remove it from the matter integration using the HA UI on the
table/phone/desktop
2. remove it from leviton app if it is added there using the UI on the
table/phone
2. hold the button on the device for 12 seconds till it starts blinking.
3. add it back into the matter integration using the UI on the tablet/phone
4. hold the button on the device for 7 seconds (but less than 12) till it
starts blinking
5. add it back into the leviton app on the table/phone
…On Wed, May 15, 2024 at 5:52 PM Dhia Elhaq Rzig ***@***.***> wrote:
I have a leviton D23LP plug and can't seem to pair it either. It
successfuly paired for 5s showing up as a switch (#117042
<#117042> ), then stopped
working. Attempting to repair it has failed.
—
Reply to this email directly, view it on GitHub
<#117306 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AVZPMXHAWWJKTCDSNAHKOHDZCPKLPAVCNFSM6AAAAABHS2ROFWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJTGUYTINRUGY>
.
You are receiving this because you commented.Message ID:
***@***.***>
from core.
marcelveldt
commented on September 26, 2024
Please attach (not paste!) the diagnostics dump of your device(s) with issues and describe to me exactly what kind of device it is and what it should be. We discover light entities only if the right combination of attributes and device types match.
We fixed one issue with one of the Leviton devices at one day, to break another case the next day.
from core.
jamesjhfadler
commented on September 26, 2024
Hi Marcel
I’m traveling for the next several days but will attempt to get the
diagnostic to you as soon as I am able
Yes I saw the other ticket where you fixed the Leviton switch the switch
imported as a light
…On Thu, May 23, 2024 at 10:06 AM Marcel van der Veldt < ***@***.***> wrote:
Please attach (not paste!) the diagnostics dump of your device(s) with
issues and describe to me exactly what kind of device it is and what it
should be. We discover light entities only if the right combination of
attributes and device types match.
We fixed one issue with one of the Leviton devices at one day, to break
another case the next day.
—
Reply to this email directly, view it on GitHub
<#117306 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AVZPMXHOBWVMIGTMOQR2T7TZDXZUZAVCNFSM6AAAAABHS2ROFWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRXGIYTIOJYHA>
.
You are receiving this because you commented.Message ID:
***@***.***>
from core.
jamesjhfadler
commented on September 26, 2024
Hi Marcel,
I have attached the diagnostics dump for the dimmer.
The dimmer device used to have a light entity, not that entity is disabled
and a switch entity is added
Jim
…On Thu, May 23, 2024 at 10:06 AM Marcel van der Veldt < ***@***.***> wrote:
Please attach (not paste!) the diagnostics dump of your device(s) with
issues and describe to me exactly what kind of device it is and what it
should be. We discover light entities only if the right combination of
attributes and device types match.
We fixed one issue with one of the Leviton devices at one day, to break
another case the next day.
—
Reply to this email directly, view it on GitHub
<#117306 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AVZPMXHOBWVMIGTMOQR2T7TZDXZUZAVCNFSM6AAAAABHS2ROFWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRXGIYTIOJYHA>
.
You are receiving this because you commented.Message ID:
***@***.***>
from core.
benrafshoon
commented on September 26, 2024
I am seeing the same behavior for TP-Link Tapo P135 dimmer plugs. After update, the light entities show up as unavailable, but there are now switch entities that will turn the lights on and off, but do not allow dimming.
from core.
jamesjhfadler
commented on September 26, 2024
I'm not sure my diagnostics made it during my remote attempt. Here is it again hopefully.....
This is a dimmer plug. The light. entity has disappeared and replaced by a switch. entity.
matter-7cc0fe044dbd3e04bca9cc55c4fa3ad0-D23LP-29bd6abd4104f8962bf1586824f4e948.json
from core.
marcelveldt
commented on September 26, 2024
@jamesjhfadler thanks for the diagnostics dump, this helps me to inspect/reproduce the issue.
@benrafshoon do you mind sharing the dump as well ?
from core.
marcelveldt
commented on September 26, 2024
nvm, I found the issue already - will be fixed in the next HA release
from core.
jamesjhfadler
commented on September 26, 2024
Excellent!
Thank you Marcel
…On Wed, May 29, 2024 at 3:01 PM Marcel van der Veldt < ***@***.***> wrote:
nvm, I found the issue already - will be fixed in the next HA release
—
Reply to this email directly, view it on GitHub
<#117306 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AVZPMXAQ77KSQMFN3DXF77LZEYQZNAVCNFSM6AAAAABHS2ROFWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZYGA3TINBUGA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
from core.
Related Issues (20)
- WARNING: Waiting on integrations to complete setup HOT 4
- duplicated upnp devices detected HOT 2
- Airtouch 5 integration stopped working after console upgrade HOT 3
- Synology photos shared items are not visible in the media browser HOT 15
- Tuya fan entity (Duux Whisper Flex) automatically starts oscillating when clicked wherever in the interface HOT 1
- Here Travel Time detected blocking call to listdir with args / 2024.7.0b4 HOT 3
- Smartlife Tuya integration HOT 6
- Error handling request - ConnectionResetError: Cannot write to closing transport HOT 8
- Somfy Cover shows strange and missing values. HOT 9
- Met.no not reporting weather data HOT 5
- Buienradar unable to retrieve data HOT 17
- AlarmDecoder integration sometimes internally crashes and silently stops updating HOT 3
- Amber Electric integration suddenly failing HOT 16
- Clear nights reporting as sunny on weather forecast with Openweathermap HOT 5
- Blink: Fails to properly recover after a system restart. HOT 1
- Extremely poor performance of compilation of statistics on MariaDB HOT 8
- Tuya integration problem HOT 2
- Turning on a Samsung Windfree airco via HA turns the display light on HOT 1
- Energy Dashboard doesn't generate a _cost if the value is negative
- Roborock integration not showing current active map sensor HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from core.