Error Starting The App about pizero_bikecomputer HOT 3 CLOSED

@Stoutscientist Sorry for the late reply.

The first error is due to your incorrect specification of G_INSTALL_PATH (maybe /root/pizero_bikecomputer), so I will not follow up.

The second error depends on which LCD module you are using and whether you are starting with X Window / Console. This is also described in the software_installation and you can run it.

Perhaps you run the following in a console $ python3 pizero_bikecomputer.py and it will not start.

Ohhh that makes sense! Thank you!

from pizero_bikecomputer.

After moving the program to /root/pizero_bikecomputer, I now get this error:

`########## INITIALIZE START ##########

Raspberry Pi Zero 2 W Rev 1.0(BCM2835), serial:0x51457cbf

Initialize modules:
config import : 1.167 sec
config init : 0.050 sec
display import: 0.017 sec
display init : 0.000 sec
import gui : 1.339 sec
import logger : 0.083 sec
total : 2.656 sec

########## INITIALIZE END ##########
qt.qpa.xcb: could not connect to display
qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found.
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

Available platform plugins are: eglfs, linuxfb, minimal, minimalegl, offscreen, vnc, xcb.

Aborted
`

from pizero_bikecomputer.

@Stoutscientist
Sorry for the late reply.

The first error is due to your incorrect specification of G_INSTALL_PATH (maybe /root/pizero_bikecomputer), so I will not follow up.

The second error depends on which LCD module you are using and whether you are starting with X Window / Console. This is also described in the software_installation and you can run it.

Perhaps you run the following in a console
$ python3 pizero_bikecomputer.py
and it will not start.

from pizero_bikecomputer.