Bug: Hain window shrinks when two displays have different DPI scaling about hain HOT 1 OPEN

I'm also experiencing this problem, except it's worse than just resizing the window.

I have three displays:

Display 1 - 1920x1080 / 100% Scaling
Display 2 (Primary) - 1920 x 1080 / 100% Scaling
Display 3 - 1920 x 1080 / 150% Scaling

When set to use currently active display:

Steps taken in order:

1. First launched - defaults to display 1, where nothing shows up.
2. Tried to use shortcut on display 1 - still nothing.
3. Opened on display 2 - works fine, correct size and centered.
4. Then opened on display 3 - works fine, correct size and centered.
5. Went back to display 2 - incorrect size and off center. It's now stuck this way until Hain is restarted.
6. Tried again on display 1 - still nothing.

So basically, once it's been opened on the display with different scaling, it gets stuck with the wrong dimensions, and display 1 is completely non-responsive from the start.

When set to open on specific display (Display 2):

In this mode, it's worse:

1. Initial load - shows correctly on display 2.
2. Display 1/2/3 - using the shortcut, it now fails to open on all three.

Once it's been closed after the automatic initial load, it's dead unless I restart Hain. So basically, it's completely unusable with this setting.

With Display 3 set to 100% scaling instead of 150%:

When all windows have default scaling, it then works fine, both with the "active display" setting and the "specific display" one.

Incidentally, when Display 3 is at 150% scaling, the "open on specific display" list in the preferences shows it as having a resolution of 1280 x 721, instead of 1920 x 1080. I don't know if this is how the OS is supposed to report it to Electron, but I thought it might be worth noting.

For now I have set the third display to 100% scaling, but it's a pretty inconvenient change to make one piece of software work.

from hain.