Some hints on implementing stamp tool similar to meshmixer about geometry3sharp HOT 2 CLOSED

I can't tell you exactly how the mm Stamp tool works, but similar operations were presented in this paper: http://www.dgp.toronto.edu/~rms/pubs/SurfaceTreeEG08.html
and my PhD thesis: http://www.dgp.toronto.edu/~rms/pubs/PhDThesis10.html

also the demo software that eventually became meshmixer is open-source (although you need visual studio 2008 to build it, unless you update the third-party libs): http://www.dgp.toronto.edu/~rms/software/DragDropTool/index.html

I recently added an implementation of the Discrete Exponential Map to g3Sharp, which these are based on. But I don't have constrained delaunay triangulation, which they also used.

from geometry3sharp.

Thanks for the information. If I remembered correctly, I think the discrete exponential map is mentioned in the GeoBrush paper. Because I'm new to interactive mesh editing, I thought this is straight forward, but it turns out maybe more background knowledge is required. I'll look into it first.

from geometry3sharp.