Black screen after reboot about lcd-show HOT 17 OPEN

I downgraded to 2017-07-05 Raspbian and it works fine with the steps above. Something in the latest version must cause the hang up.

from lcd-show.

I'm having the same issue with the same screen, followed all the instructions and getting the same screen. CTRL+ALT+F1 however is not working for me

from lcd-show.

Which system version are you using for testing?

from lcd-show.

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show

from lcd-show.

The latest version of Raspbian

from lcd-show.

We have provided IMAGE with drivers. You can use it for test:
链接：https://pan.baidu.com/s/1kVjBdXH 密码：0suf

from lcd-show.

3.5inch_raspbian20171129.7z
Raspbian Version:2017-11-29

from lcd-show.

I just had this same issue after updating/ upgrading. The fix for me was to:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show
sudo ./LCD35-show

It appears that one of the changes breaks the driver included with the image you provide(not unusual with Linux). @goodtft I would recommend your next manufacturing run you include this possibility in the documentation.

from lcd-show.

I'm still having this issue on the RPi zero with the same version of Raspbian as above.
I tried the above solution and still return to the black screen. If I hit CTRL+ALT+F2 the keyboard only seems responsive every few seconds or so and doesn't stay responsive long enough to type more than one letter.

from lcd-show.

I also had to use an older version of raspbian to get it to work, unfortunately something broke in 2017-08-17/Stretch

from lcd-show.

I downgraded to 2017-07-05 Raspbian and it works fine with the steps above. Something in the latest version must cause the hang up.

@graham768 I've the same problem with raspberry pi 0, where do you have downloaded the correct version of Raspbian? Thx

EDIT:
It's possible to download the old versione of Raspbian from here
http://downloads.raspberrypi.org/raspbian/images/, I can confirm that the display work correctly using 2017-07-05 Raspbian

from lcd-show.

Thanks guys ! Two weeks trying to figure it out what's wrong with my LCD display. Works fine on my RP3 but not my RPA+. Both works with older rasbian version.

from lcd-show.

Is this method still working? I tried installing the drivers on 2017-07-05 Raspbian but after a restart I'm stuck at mounting boot.

from lcd-show.

As far as I know, this method still works on my RPi zero. You might want to create a new issue.

from lcd-show.

The problem still exists. I had to revert to the July 5 2017 Raspbian to get it to work as well. The manufacturer should fix this because I have other things that need an updated OS leaving me with no alternative but to ditch the screens and use another product.

from lcd-show.

Thank You man!

from lcd-show.

I am using this screen with Retropie on a RPi 3 B+. I entered the commands -

git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show
sudo ./LCD35-show

When it reboots, I get a white screen, then the boot menu come up on the 3.5 screen, but then Retropie defaults to the HDMI output. If I go back to command prompt, that comes up on the 3.5 screen.

Any ideas how I get Retropie to display on the 3.5 screen? Thanks in advance

from lcd-show.