Wemos D1 Mini compile errors about esphome-mitsubishiheatpump HOT 7 CLOSED

Any indication which release of ESPHome this will be included in? Would rather not install dev if I can avoid it.

from esphome-mitsubishiheatpump.

@jamescadd The way I have done it is simply to install both adding and go to the sidebar tab of the dev one only when managing devices I want on the dev branch.

from esphome-mitsubishiheatpump.

Your compile error is due to using the wrong version of ESPHome. You'll need to use the Dev version of ESPHome and compile again.

You can find instructions for getting the latest Dev version here, https://esphome.io/guides/faq.html#how-do-i-use-the-latest-bleeding-edge-version

from esphome-mitsubishiheatpump.

FYI you can have both the normal and dev versions of the add-on installed side by side and use the dev one exclusively for this.

from esphome-mitsubishiheatpump.

@mihalski it would be ideal to have both versions installed, any info on how to use the dev version just for the heat pump? There was a mention about port conflicts in the docs somewhere that made me hesitate to try this.

from esphome-mitsubishiheatpump.

I haven't seen anyone post a dev timeline on the Esphome project, and the Discord channel was pretty cagey about timing.

I had to pin ESPHome to an [older commit|https://github.com/esphome/esphome/commit/8b92456ded97c236846e959fb3797f51b9dda4fc] due to a recent breaking change, and need to revisit that.

from esphome-mitsubishiheatpump.

Looks like my need to pin a commit is no longer an issue. I'm back on mainline "Dev" again.

from esphome-mitsubishiheatpump.