Is it possible to get the current width and hight of the preview box ? <p dir="aut

get current width and height ? about fzf-tab-source HOT 3 CLOSED

Magniquick commented on September 13, 2024

get current width and height ?

from fzf-tab-source.

Comments (3)

Freed-Wu commented on September 13, 2024 1

I add some tools which can display images to README.md. Hope it can help you.

https://github.com/Freed-Wu/fzf-tab-source#less

from fzf-tab-source.

Freed-Wu commented on September 13, 2024

😢 Sorry I use chafa and not familiar with timg. https://github.com/Freed-Wu/Freed-Wu/blob/dev/.lessfilter#L92

you can ask https://github.com/Aloxaf/fzf-tab about how to get height and width.
or https://github.com/hzeller/timg about is it possible to not to require height and width.

from fzf-tab-source.

Magniquick commented on September 13, 2024

😢 Sorry I use chafa and not familiar with timg. https://github.com/Freed-Wu/Freed-Wu/blob/dev/.lessfilter#L92

you can ask https://github.com/Aloxaf/fzf-tab about how to get height and width. or https://github.com/hzeller/timg about is it possible to not to require height and width.

Fzf-tab seems to be quite dead at this moment.
Timg works after setting the height and width to a ridiculously large value, but if the image is longer than it is wider (potrait), it overflows the fzf box and the overflowed part stays there, even while previewing another file.

from fzf-tab-source.

Recommend Projects