Fresh boards, can't flash via DFU about easy-pdk-programmer-hardware HOT 4 OPEN

st-flash write EASYPDKPROG.bin 0x08000000
st-flash 1.6.0
2023-07-05T16:11:19 INFO usb.c: -- exit_dfu_mode
2023-07-05T16:11:19 INFO common.c: Loading device parameters....
2023-07-05T16:11:19 INFO common.c: Device connected is: F07x device, id 0x20016448
2023-07-05T16:11:19 INFO common.c: SRAM size: 0x4000 bytes (16 KiB), Flash: 0x10000 bytes (64 KiB) in pages of 2048 bytes
2023-07-05T16:11:19 INFO common.c: Attempting to write 35108 (0x8924) bytes to stm32 address: 134217728 (0x8000000)
Flash page at addr: 0x08008800 erased
2023-07-05T16:11:19 INFO common.c: Finished erasing 18 pages of 2048 (0x800) bytes
2023-07-05T16:11:19 INFO common.c: Starting Flash write for VL/F0/F3/F1_XL core id
2023-07-05T16:11:19 INFO flash_loader.c: Successfully loaded flash loader in sram
 18/18 pages written
2023-07-05T16:11:21 INFO common.c: Starting verification of write complete
2023-07-05T16:11:21 INFO common.c: Flash written and verified! jolly good!

[20309.056409] usb 1-3: new low-speed USB device number 31 using xhci_hcd
[20309.184423] usb 1-3: device descriptor read/64, error -71
[20309.424377] usb 1-3: device descriptor read/64, error -71
[20309.664411] usb 1-3: new low-speed USB device number 32 using xhci_hcd
[20309.792386] usb 1-3: device descriptor read/64, error -71
[20310.028388] usb 1-3: device descriptor read/64, error -71
[20310.140432] usb usb1-port3: attempt power cycle
[20310.556408] usb 1-3: new low-speed USB device number 33 using xhci_hcd
[20310.556930] usb 1-3: Device not responding to setup address.
[20310.764895] usb 1-3: Device not responding to setup address.
[20310.972389] usb 1-3: device not accepting address 33, error -71
[20311.100448] usb 1-3: new low-speed USB device number 34 using xhci_hcd
[20311.100937] usb 1-3: Device not responding to setup address.
[20311.308932] usb 1-3: Device not responding to setup address.
[20311.520396] usb 1-3: device not accepting address 34, error -71
[20311.520447] usb usb1-port3: unable to enumerate USB device