Comments (76)
Device: Samsung Galaxy S20
Android version: latest
Goggles: v1
Used cable: generic usb c - usb c
25 mbit: Doesn't work (also tried with usb c - a and otg a - c)
50 mbit: Works
Latency: very fast response
25mbit shows one frame then freezes. Waiting 20s or so does not solve the issue.
50mbit displayed fluently immediately
from digiview-android.
Goggles: V1
Device: Lenovo TAB M10 FHD Plus 4GB
Android version: 10
App version: 1.0.0-beta
Used cable: OTG USB-C to A (https://www.amazon.in/Vention-USB3-0-Female-Type-C-VAS-A51-B025/dp/B07DC9JP7G) and generic USB A to C cable (tried orig. DJI and 2 other cables - all worked).
25 mbit: works
50 mbit: works (after first 3 attempts: 1. froze on first frame, 2. froze after 3 seconds, 3. froze after 10+ seconds, 4. no more image freezing)
Latency: 200 - 300ms basically the same as the googles themselves!
- An OTG cable/dongle is a must for Lenovo TAB M10 FHD Plus 4GB. Without that no USB C to C (I tried a generic one and expensive one) worked. Not even the first frame...
- Works also with Auto temperature protection ON, but you get the image only after you arm the quad!
from digiview-android.
Goggles: V1
Device: Nokia 5.1 Plus
Android version: 10
Used cable: Cheap Aliexpress cable (https://nl.aliexpress.com/item/4000512317646.html)
25 mbit: Works
50 mbit: Works
Latency: ~200ms to +- 3000ms
When starting the app for the first time when plugging in the usb cable it freezes, after pressing the "back" button and opening the app again it works.
Edit: did some more testing, the stream starts lagging behind so the latency increases, it catches up eventually and gets behind again.
from digiview-android.
Goggles: V2
Phone: Samsung S7 Edge
Android version: 8.0.0
Used cable:
- Micro-usb OTG: https://www.aliexpress.com/item/32828564442.html
- USB-C: https://www.aliexpress.com/item/4000293037064.html
25 mbit: Not yet tested (will update when tested)
50 mbit: Works
Latency: ~220
from digiview-android.
Goggles: V1
Device: Google Pixel 4 xl
Android version: 11
Used cable: Stock USB-C - USB-C
25 mbit: Not Tested
50 mbit: Works
Latency: ~150ms
from digiview-android.
Goggles used (v1/v2): v1
Device brand/type: Essential PH-1
Android version: 10
Used cable: USB C to C, and also USB C to A with OTG USB C
25mbit working? No
50mbit working? Yes
latency*: 200ms to 2000ms, depending on session
from digiview-android.
Goggles: V1
Device: Samsung S20 5G
Android: 11
Cable:
Samsung original USB-C to USB-C cable: Works
Third-party USB-C to USB-C cable: Doesn't connect
25mbit: No (Picture frozen)
50mbit: Yes
Latency: ~3000ms to 5000ms (Edit: After restarting everything the latency got down to 200ms to 300ms)
Temp-control: Off
Mode (Airunit): Low-latency
Scale: 16:9
from digiview-android.
Goggles: V2
Device: Fairphone 3
Android version: 10
Used cable: OTG cable
25 mbit: works
50 mbit: Not Tested
Latency: many seconds (awful)
from digiview-android.
V1 Goggles
Galaxy S8 phone
50mbit working, have not tested other
USB C to USB C data cable: https://www.amazon.com/dp/B08FLHQXSH?psc=1&ref=ppx_yo2_dt_b_product_details
Not OTG Cable.
from digiview-android.
Goggles used (v1/v2) : v1
Device brand/type: Huawei P30 Pro
Android version: 10.1
Used cable: USB-C to USB-C doesnt work
Used cable: USB-C to USB-A OTG Adapter works
25mbit working?: No
50mbit working?: No
latency*
Picture is sent and shown in app, but then app freezes.
from digiview-android.
Goggles: V2
Device: LG nexus 5x
Android version: 8.1
Used cable: gopro usb-c to usb-a cable with apple usb a to usb-c dongle, did not work with usb c to usb c
25 mbit: -did not try
50 mbit: Works
Latency: ~600ms, sometimes more
from digiview-android.
Goggles used (v1/v2) : v1
Device brand/type: Samsung Galaxy S9
Android version: 10
Used cable: USB-C to USB-C
25mbit working?: not tested
50mbit working?: Yes, but feed freezes once in a while
latency, starts high but gets low after 30 seconds.
from digiview-android.
Goggles used (v1/v2): v1
Device brand/type: OnePlus Nord N10 5G
Android version: 10 (Oxygen OS 10.5.11.BE89BA)
Used cable: short USB-C to USB-C from Nimaso (https://www.amazon.de/gp/product/B0897CZKPG)
25mbit working? yes
50mbit working? yes
latency* fast, 100-200 ms
from digiview-android.
Goggles: V1
Device: Samsung Note 9
Android version: 10
Used cable: Unlabelled Sabrent external drive USB-C to USB-C cable
25 mbit: Not tested yet
50 mbit: Works
Latency: ~150 once it settles
from digiview-android.
Goggles used: v2
Device brand/type: OnePlus 8 Pro
Android version: Oxygen OS 11 (Android 11)
Used cable: USB-A -> USB-C with Pixel USB-A -> USB-C adapter
25mbit working? No. Retrieves first frame, then hangs
50mbit working? Yes
latency: 180ms
from digiview-android.
Goggles used (v1/v2): V1
Device brand/type: Samsung S10+ 5G
Android version: 11
Used cable: Anker cable that came with USB-C battery pack
25mbit working? Yes
50mbit working? Yes
latency*: ~500ms
A higher end Anker cable that I use for my display port external touch screen did NOT work.
The cable I use for oculus link did not work.
Both said "Unsupported USB Device".
from digiview-android.
Google V1
Acer win10 32bit Tablet
50 +25 bit working
6 sekonds delay
from digiview-android.
Goggles: V1
Device: OnePlus 7T
Android version: 10
Used cable: USB-C to USB-C (The one from the Pixel 2L)
Used cable: USB-C to USB-A + USB-A to USB-C OTG (Apple)
25 mbit: Not-tried
50 mbit: Sometimes it works very well. Most of the times it shows a few frames at high speed and then freezes or shows frames at a very low rate. Changing cables didn't seem to help it.
Latency: ~150ms when working fine
from digiview-android.
Goggles used = V2
Device brand/type = Samsung Galaxy S7 (not edge)
Android version = 8.0.0
Used cable = Same that came with the V2 goggles
Used cable = https://www.netonnet.se/art/ljud-bild/kablar/usb-kabel/andersson-usb-otg-cable/204412.13715/
25mbit working? = Did not test
50mbit working? = Yes but it took some time for it to unfreeze when connecting the phone
Latency* = Around 200ms
Goggles used = V2
Device brand/type = Huawei P Smart 2021
Android version = 10
Used cable = Same that came with the V2 goggles
Used cable = https://www.netonnet.se/art/ljud-bild/kablar/usb-kabel/andersson-usb-otg-cable/204412.13715/
25mbit working? = Did not test
50mbit working? = Yes but it took some time for it to unfreeze when connecting the phone
Latency* = Around 200ms
Tried a USB-A to micro USB cable to the phone and USB-A to USB-C to the Goggles but it didnt work.
Had to be a USB-A to micro USB OTG to the Phone and USB-A to USB-C cable to the googles
Worked to cast from the phone to a chromecast ultra aswell. Longer delay then, but worked!
from digiview-android.
Google V1
Samsung S7
Android 8.0
Both mbps
Below 1s latency
Works great
from digiview-android.
Goggles: V1 + normal Airunit
Device: Xiaomi MI9
Android version: 11
Used cable: USB-C to USB-A + USB-A to USB-C OTG (ebay generic brand)
25 mbit: Working but freezes after ~2 minutes
50 mbit: Working but freezes after ~4 minutes, then auto resumes after ~2 minutes if left on the freezed screen. Then freezes again after ~4 minutes... Tried disabling the battery saving stuff and so on. Maybe it's still something in my phone.
Latency: 124-184ms
from digiview-android.
Goggles: V1
Device: Samsung S10
Android version: 11
Used cable: stock DJI usb c cable with samsung stock OTG USB-C adapter
25 mbit: Not tested yet
50 mbit: Works
Latency: at first test 100-150ms than at second test start with low latency after a few seconds increases to 2000ms-2500ms so became very slow 🤔
Same experiwnce with an old Samsung J5 with 7.1android
received_2311501135661030.mp4
from digiview-android.
Goggles: V1
Device: HuaWei P30
Android version: 10
Used cable: type-c + otg
25 mbit: Works
50 mbit: Works
Latency: ~200ms to +- 3000ms
from digiview-android.
Goggles; v1
Device: Galaxy S7 (not edge)
Android version: 8.0
Used cable: OTG adapter + type-c
25mbit working? - stops most the time after 1-2sec; need to restart to get it going
50mbit working? - works stable; need to restart multiple times to get it going
latency: 100-200ms
from digiview-android.
Goggles: V1
Device: Samsung Note 20 Ultra
Android Version: 11
Used cable: USB-C to USB-C cable (Oculus Quest 2 Cable)
25mbit working? - Displays initial image and freezes
50mbit working? - Works great
latency: ~150ms measured and remains consistent
from digiview-android.
V1 Goggles
Galaxy S8 phone
Android Version: 8.0.0
Usb cable: original DJI cable A-C with Samsung OTG adapter
25mbit not working, have not tested other
When starting the app for the first time when plugging in the usb cable it freezes, after pressing the "back" button and opening the app again it works for a few seconds then freezes again
from digiview-android.
Goggles used: v1
Device brand/type Samsung Galaxy Note 10 Plus
Android version: 11
Used cable: usbc to usbA with USB A to C adapter
25mbit working? yes
50mbit working? yes
latency* about 3 seconds
Starts with frozen image, then starts working after about 10 seconds, but has very high latency (about 3 seconds)
Very intermittant - screen frequently freezes and stops responding
After quitting the app and disconnecting the cable i get error message below:
Restart your phone
A USB storage device was removed unsafely. To prevent your phone from restarting unexpectedly, save unsaved data and restart now.
The App will then no longer work again until the phone is restarted.
Have also now tried with a USBc to USBc cable - seems much more stable but has constant 5 second latency!
from digiview-android.
Goggles: V2
Device: galaxy s20
Android version: 11
One UI version: 3.1
Used cable:
-WORKED: usb-C to usb a with OTG adapter on phone end.
-DID NOT WORK: usb-C to usb a with OTG adapter on goggle end
-DID NOT WORK: usb-c to usb-c
25 mbit: -did not try
50 mbit: Works great
Latency: Did not test.
from digiview-android.
Goggles used v1
Device Draggon Touch Max 10
Android version 9
Used cable - All
25mbit working No
50mbit working No
latency*
image starts for 1 second then stops and remains frozen.
from digiview-android.
Goggles: V2
Device: Oneplus 6 8gb ram
Android version: 10
Used cable: DELL USB to USBC cable
25 mbit: Works
50 mbit: Works
Latency: ~100ms to +- 300ms
Issue with aspect ratio. App stretches the image to the size of the display.
from digiview-android.
Goggles used: V1
Device: OnePlus 5T
Android version: 10 (Oxygen OS 10.0.1)
Used cable: 1,5m USB-C to USB-C
25mbit: not tested yet (will update)
50mbit: YES
latency: jumping from ~100 to 300 ms
Sometimes stuck on the first freeze.
from digiview-android.
Goggles: V1
Device: Asus ROGPhone 2
Android Version: 10 (17.0240.2103.75)
Cable: 1,5m USB-C TO USB-C
25mbit: Yes
50mbit: Yes
Latency: N/A
Freezes everytime after 1sec. Thats why i can't massure the latency
from digiview-android.
Device: Pixel 5
Android version: latest
Goggles: v1
Used cable: generic usb c - usb c and otg
25 mbit: Works
50 mbit: Works
Latency: very fast response
from digiview-android.
Goggles: V1
Android Version: 10
Device: Galaxy A21
Cable: Anker OTG
50mbit: works
25mbit:Haven't tried yet
Latency: Waiting to test, but very minimal initially.
Going to see if I can test on the Vive Focus, and Oculus 2. Charging the Vive now.
from digiview-android.
VIVE FOCUS PLUS WORKS!!!
Goggles: V1
Software Version 2
Device: Vive Focus Plus
Cable: Anker OTG
50mbit: works
25mbit:Haven't tried yet
Latency: Waiting to test, but very minimal initially.
from digiview-android.
Goggles: V1
Device: Blackview BV9900 Pro
Android version: 10
Used cable: Cheapo OTG pigtail + 1m cable
25 mbit: Not tested
50 mbit: Works
Latency: ~200ms on the bench, stacks up to ~10s while flying though.
from digiview-android.
Goggles used (v1/v2): v2
Device brand/type: Samsung Tab S4
Android version: 10
Used cable: [Anker USB-C](https://www.amazon.de/Anker-2-Pack-Powerline-Galaxy-MacBook-Rot/dp/B072152BWQ/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=anker%2Busb%2Bc&qid=1621168092&sr=8-5&th=1)
25mbit working?: Yes
50mbit working?: Yes
latency*: 25: 100ms; 50: 230ms
from digiview-android.
Goggles used (v1/v2): v2
Device brand/type: Fairphone 3
Android version: 10
Used cable: [Anker USB-C](https://www.amazon.de/Anker-2-Pack-Powerline-Galaxy-MacBook-Rot/dp/B072152BWQ/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=anker%2Busb%2Bc&qid=1621168092&sr=8-5&th=1)
25mbit working?: Yes
50mbit working?: Yes
latency*: 25: 100ms; 50: 170ms
from digiview-android.
Goggles used (v1/v2): v2
Device brand/type: Moto G5 Plus (XT1685)
Android version: 8.1.0
Used cable: [Anker USB-C](https://www.amazon.de/Anker-2-Pack-Powerline-Galaxy-MacBook-Rot/dp/B072152BWQ/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=anker%2Busb%2Bc&qid=1621168092&sr=8-5&th=1)
25mbit working?: Yes
50mbit working?: Yes
latency*: 25: 100ms; 50: 160ms
from digiview-android.
Goggles used (v1/v2): v2 Device brand/type: Fairphone 3 Android version: 10 Used cable: [Anker USB-C](https://www.amazon.de/Anker-2-Pack-Powerline-Galaxy-MacBook-Rot/dp/B072152BWQ/ref=sr_1_5?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=anker%2Busb%2Bc&qid=1621168092&sr=8-5&th=1) 25mbit working?: Yes 50mbit working?: Yes latency*: 25: 100ms; 50: 170ms
Is it a question of cable? I've the exact same setup and it becomes really laggy after a minute or so like slow mo style
from digiview-android.
Is it a question of cable? I've the exact same setup and it becomes really laggy after a minute or so like slow mo style
I haven't really tested it for a long duration, just for a few seconds. I could do a longer test for comparison, but it may take a while because it's my girlfriend's fairphone ;)
from digiview-android.
Goggles: V1
Device: Google Pixel 3A
Android version: 11
Used cable: Apple USB-C to USB-A adapter + USB-A to USB-C cable that came with goggles
25 mbit: Works
50 mbit: Works
Latency: ~100ms
from digiview-android.
Goggles: V1
Device: Huawei MediaPad M5 Lite
Android version: 8.0.0
Used cable: USB-C to USB-A cable -> USB-A to USB-C OTG adapter
25 mbit: Freezes after a couple of frames
50 mbit: Works
Latency: 100 - 200 ms
from digiview-android.
Is it a question of cable? I've the exact same setup and it becomes really laggy after a minute or so like slow mo style
I've tested it again for a longer time and the Stream runs smoothly for about 2-3 minutes afterwards the Stream suddenly freezes, but no slow mo. After closing the app and reconnecting the goggles it has the exact same behavior.
Edit: I've done all my tests with a fan blowing air on the vista.
from digiview-android.
Note: it's important to keep your Air Unit/Vista cool if testing on the desk for more than a minute. As it becomes hotter, its performance will gradually start to drop before goggles show "Air Unit overheating, land promptly" warning and it eventually shuts down completely.
from digiview-android.
Goggles: V1
Device: Xiaomi A1
Android version: 9
Used cable: HOCO с usb c на usb c 3A PD (https://aliexpress.ru/item/32918721488.html)
25 mbit: Works
50 mbit: Works
Latency: ~200ms to +- 500ms
Goggles: V1
Device: Xiaomi Redmi 9 Pro
Android version: 10
Used cable: HOCO с usb c на usb c 3A PD (https://aliexpress.ru/item/32918721488.html)
25 mbit: Not Work
50 mbit: Not Work
Freezing all time
from digiview-android.
Device 1:
Goggles used (v1/v2): v1
Device brand/type: Samsung Galaxy Tab S3
Android version: 9
Used cable: 3'
25mbit working?: Yes
50mbit working?: Yes
latency*: 1-2sec
https://youtu.be/G-WOKrJsLlE
Device 2:
Goggles used (v1/v2): v1
Device brand/type: Samsung Galaxy S10
Android version: 11
Used cable: 3'
25mbit working?: Yes
50mbit working?: Yes
latency*: 4-5sec
https://youtu.be/NBkyl5Tc088
from digiview-android.
Goggles used: V1
Device brand/type: Samsung Galaxy S9+
Android version: 10
Used cable: Generic USB-C to USB-C data cable, 6 inch
25mbit working? Not tested
50mbit working? Yes
Latency: <200ms
My workflow:
- Ensure SD-Card is present in DJI Goggles
- Turn off temp control
- Arm quad to keep VISTA cool (do not do this inside or RIP)
- Start recording, if not automatic
- Connect phone to DJI FPV Goggle V1 via USB-C data cable
- App will connect after ~2-8 seconds
- Initially there is a significant lag/freeze frame but it reduces after 5-10 seconds
Repeat steps 4 and 5 after disconnecting the phone if any issue occurs and the issue resolves itself.
NOTE: I have not tested real world flying conditions.
from digiview-android.
V1
Pixel 3a
Android 11
USB-C to USB-C
No go
from digiview-android.
Goggles: V2
Device: Samsung Galaxy A20e
Android version: 10
Used cable: OTG cable (regular USB-C - USB-C didn't work)
25 mbit: Works
50 mbit: Works
Latency: <200ms
Works with and without temp control.
from digiview-android.
Goggles: V2
Device: Huawei Mediaped M5 plus
Android version: EMUI 9.1.0
Used cable:
OTG Adapter:
https://www.amazon.de/dp/B07QC5CHYR/ref=cm_sw_em_r_mt_dp_GZ9JJJGG1ZJYMTV99G90?_encoding=UTF8&psc=1
25 mbit: Works
50 mbit: not tested
Latency: <200ms
takes a while and sometimes freezes
from digiview-android.
Goggles: V1
Device: Samsung Note 9
Android Version: 10
Transmitter used: CaddX Nebula Nano.
Used Cable: USB-C to USB-C
25Mbit and 50Mbit: Working.
Latency: <200ms
Temperature control deactivated, No recording, MicroSd inserted.
from digiview-android.
Goggles used (v1/v2) = v2
Device brand/type = Shield Tablet K1
Android version = Android 7.0, Shield tablet software version 5.4(24.29.404.195)
Used cable = USB-C to USB-A cable -> OTG Y-adapter -> tablet
25mbit working? = yes
50mbit working? = yes
latency* = 160ms, 200ms, 200ms (on 3 consecutive snapshots)
The image froze on a few occasions but would resume after changing app focus (i.e. switch away from app, then switch back).
OTG Y-adapter required (as opposed to direct cable connection).
from digiview-android.
Goggles v2
Device: Pixel 4a
Android version 11
Used cable: nonda Cable USB C https://www.amazon.es/gp/product/B08GG9R39J/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
25mbit working? Yes
50mbit working? Yes
latency* ~1sec
from digiview-android.
Goggles used (v1/v2): v2
Device brand/type: Pocophone F2 Pro
Android version: 11 RKQ1.200826.002
Used cable: Ugreen OTG - https://www.amazon.es/gp/product/B072V9CNTK
25mbit working?: Yes
50mbit working?: Yes
latency*: 150 - 200ms
from digiview-android.
Device brand/type: Oneplus 9 Pro
Android version: 10
Goggles used (v1/v2): V1
Used cable: usb-c to usb-c cable that came with Pixel phone
50mbit working? Yes
25mbit working? Didn't test
Latency: 3 measurements 174/175/183ms
Tried with OTG and didn't work with any of the cables I have, also didn't work with the usb-c charging cable for my Macbook Pro.
from digiview-android.
Goggles: V1 & V2
Device: Samsung Tab S6 Lite
Android version: 11 & 10
Transmitter used:
CaddX Vista + DJI Cam : Works (Firmware v01.00.06.00)
DJI AirUnit + DJI Cam : Works (Firmware v01.00.06.00)
Used cable: USB-C to USB-A cable (3meters Anker) -> USB-A to USB-C OTG adapter (Anker) Works
USB-C to USB-C not working (Brand Apple)
25 mbit: Works
50 mbit: Works
Latency: ~200 ms
Digiview tried :
Alpha : Works (Some connexion problems)
Beta : Works (No Problem) Video preset : Default
from digiview-android.
- Goggles: v1
- Device: Pixel 2XL
- Android: 11
- App version: b481180
- Used cable: USB-C to USB-C
- 25mbit working? - Not tested
- 50mbit working? - Yes!
- latency: almost none
Notes:
- Buffer setting needs to be legacy, otherwise exoplayer throws errors
from digiview-android.
V1
Pixel 3a
Android 11
USB-C to USB-C
No go
Try setting buffer to legacy, seemed to do the trick for me ;)
from digiview-android.
Goggles V1
Samsung Galaxy S7
Android 8.0.0
Nvidia Shield K1 Tablet
Android 7.0
App version 1.0.0 beta
Used cable: USB 3.0 (USB C to USB A male) with Micro USB + USB C to USB 2.0 Female Adapter Cable https://www.amazon.com/gp/product/B01N1RHJC0/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
25mbit working: Yes
50mbit working: Yes
latency: approx 0.5 seconds
Video Preset: Legacy (on both Galaxy and Sheild)
*I tried all other presets and legacy worked best. Other presets work but the video was not smooth.
Temperature control activated (I prefer to keep it activated always). This did not impact my ability to get video out. I record on Air Unit SD card while using the app without issue.
Side note: I was able to use the HDMI out on the Nvidia Shield K1 Tablet successfully. This has allowed me to output video to my older FPV goggles that have HDMI in as well as large viewing screens/projectors. This was my goal with using this app and am very pleased!
from digiview-android.
Goggles used (v1/v2)
V1
Device brand/type
RedMi Note 10
Android version
11
App version (alpha/beta/...)
1.0.0 beta
Used cable
noname cable + OTG adaptater
https://www.amazon.fr/gp/product/B082F6RN3N/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
25mbit working?
yes
50mbit working?
yes
latency*
not tested
from digiview-android.
Goggles: V1
Device: OnePlus 8
Android version: 11
Used cable: stock DJI USB-C cable with cheap OTG USB-C adapter https://nl.aliexpress.com/item/4000512317646.html
25 mbit: Not tested yet
50 mbit: Works
Latency: 0.5s
Same experience with an Honor 8 in Andriod 10
from digiview-android.
Goggles used (v2)
Device brand/type : Google Nexus 5
Android version : Android 6
App version : 1.0.0-beta
Used cable : USB-C cable + adapter for old small usb
25mbit working : not yest tested
50mbit working : yes
latency : do not know, but there are many seconds between the display in the goggles and the phone
from digiview-android.
Goggles used (v2)
Device brand/type : Samsung S8
Android version : Android 7 (Samsung version)
App version : 1.0.0-beta
Used cable : USB-C cable + OTG adapter
25mbit working : not yest tested
50mbit working : yes
latency : looks fine
from digiview-android.
Goggles used (v2)
Device brand/type : Google Pixel 5
Android version : Android 11
App version : 1.0.0-beta
Used cable : USB-C cable + OTG adapter
25mbit working : no
50mbit working : no
latency : N/A
The application crash few seconds after the image is displayed.
from digiview-android.
Goggles: V1 + / Vista
Device: Xiaomi MI9 / Snapdragon 855 device
Android version: 12.5 / rooted
Used cable: USB-C to USB-C AMZN basic cable
25 mbit: works / no issues full pack ~5min
50 mbit: Not tested
approx 150ms? No stuttering
from digiview-android.
Goggles: V1 + / Vista
Device: FireHD8 Plus Tablet
Android version: FireOS 7.3.1.8
Used cable: USB-C to USB-C AMZN basic cable
lagging, not usable / recommended. CPU/GPU too slow
from digiview-android.
Goggles V2, dji air unit
Device brand/type: redmi note7
Android version 10 / MIUI 12.0.3
App version 1.0.0-beta
Used cable: dji usbc
25mbit not tested
50mbit work
latency* not tested
it worked after enabling usb debugging on developer options (developer mode activated)
from digiview-android.
DJI FPV Goggles V2, Caddx Vista unit
Google Pixel 4a(5G)
Android version 11
App version 1.0.0-beta
Used cable: USB-C to USB-C - https://www.amazon.com/Updated-AINOPE-Braided-Compatible-More-Grey/dp/B07WSD276G/ref=sxts_rp_s1_0?cv_ct_cx=cable&dchild=1&keywords=cable&pd_rd_i=B07WSD276G&pd_rd_r=17e5a10c-c479-4cac-97a6-d0982d140ebc&pd_rd_w=7WUYJ&pd_rd_wg=2EWlF&pf_rd_p=c0fa563a-b0ba-455a-bd65-7b14bea6288c&pf_rd_r=G4VQYF4VC1PYYZ5T36D1&psc=1&qid=1635106449&sr=1-1-f0029781-b79b-4b60-9cb0-eeda4dea34d6
25mbit not tested
50mbit doesn't work, App shows first picture and crashing in 1-2 seconds
from digiview-android.
- Goggles used v1
- Samsung s10plus
Only works on Legacy buffered mode (In app mode)- Android version 11
- App version beta 1.0.0
- Used cable GoPro (usb c to usb a) also works with https://www.unitek-products.com/products/usb3-1-usb-c-m-to-usb-a-m-cable
- 25mbit Yes!
- 50mbit Yes!
- latency*
from digiview-android.
Goggles: V2
Device: Google Pixel 6
Android version: 12
Used cable: Original Google Pixel OTG and various differnet USB-A to USB-C and also USB-C to USB-C
25 mbit: NO - "waiting for video"
50 mbit: NO - "waiting for video"
Latency*
Temperature protection: ON/OFF makes no difference
from digiview-android.
Goggles: V2
Device: Nexus 7 2013
Android version: LineageOS 18.1 (Android 11)
Used cable: Original Sony OTG and various differnet USB-A to USB-C cables
25 mbit: NO - "waiting for video"
50 mbit: works kinda* with temperature protection turned off (various lags and stutters, only about 10fps - unusable!)
Latency: ~300-500ms
from digiview-android.
Goggles: V1
Device: Meta/Oculus Quest 2
Android version: Android 10
Used cable: Quest USB-C USB-C Cable and cheap USB-c cable
25 mbit: connection (initial image) is FAST less than 200ms
Latency: ~300-350ms
Note: the android app can not be made "large" in order to utilize the VR experience.
that would be a great change to get done. (feels like flying on a Cinema Screen)
from digiview-android.
Goggles: V2
Device: Samsung S21 Ultra
Android version: 12
App version: 1.0.0-beta
Used cable: OTG USB-C to USB-C Tested various data cables
25 mbit: NO GOOD - Stuck on "Please Connect Goggles"
50 mbit: NO GOOD - Stuck on "Please Connect Goggles"
Latency: -
from digiview-android.
Goggles used (v2)
Device Samsung Note9
Android version : 10
App version : 1.0.0-beta
Used cable : OTG USB-C to USB-C (OG Samsung transfer cable, and tried various data cables)
25mbit working? Stuck on please connect googles
50mbit working? Stuck on please connect googles
latency*
from digiview-android.
I want to update Nokia C3-00 keypad mobile s40.
from digiview-android.
Related Issues (20)
- Digiview App Stuck at "Waiting for Video" HOT 11
- DJI goggles 2 HOT 1
- does not work properly with the DJI RC PRO
- Is this application discontinued or still in active development? HOT 2
- Mobile App won't install on Pixel 6a Android v13
- Localization update HOT 5
- Fix the splash screen
- Request port translation to crowdin platform HOT 1
- Add localization credit board in app and GH readme HOT 1
- DigiView not working with Goggles V2 FPV & Vista 01.00.0600 HOT 8
- Port into some other app store in case google play is banned HOT 3
- Multicast stream over UDP
- Feature request: Stream recording (because SD card in Goggles are not working) HOT 3
- Add OSD? HOT 6
- dji CrystalSky
- Support for FJI FPV drone? HOT 1
- Is there an iOS beta? HOT 1
- Auto-Rec Goggles HOT 1
- Credit other open source librarys
- Google Pixel 4 XL w/ v2 Goggles HOT 3
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from digiview-android.