Foxglove User Script show print NavSatFix does not work anymore about studio HOT 5 CLOSED

Internal tracking ticket: FG-5781

from studio.

Could you also provide a sample file that you are using with the above script?

from studio.

Unfortunately I cannot, but it is a GPS sensor sending data at 25Hz, and we have a recording of this, using a custom ROS message.

from studio.

I need a sample file that is causing the problem to reproduce this.

Another thing you could try is to update to the latest version of the app. 1.69 is several versions behind. If that does not work please provide a sample file.

from studio.

@kis-balazs I quickly tried this out by writing a user script that converts a geometry_msgs/TransformStamped to a sensor_msgs/NavSatFix message. It works as expected, see the screencast below.

Some remarks:

• Note the new Float64Array() for position_covariance (user script panel raises an error on empty array)
• Make sure you have saved the UserScript
• Make sure that your input topic is published by inspecting it with e.g. the RawMessage panel

I'm going to close this, feel free to reopen if the problem persists.

from studio.