Installation issue, no HDMI output about pigfx HOT 4 CLOSED

Hello,

Looks like it should work fine. Maybe I'd use a 5V power supply rather than a 5.1V. Ttry with a basic USB->micro USB cable (like the ones for samsung phones pre usb-c) on an USB port from any computer.

Can you check if your PiZEro works ok with a Raspbian (on another SD card)?

from pigfx.

Thanks for replying Francis. The Pi Zero 1.3 is okay (I've tested two), the power is okay and powered via PC or powerplugs did not solve.

Below some text about the issue as posted by me on a retro forum.

Regards, Hans.

**I have allocated a 0.9 GB partition on a Kingston SD card and on several fast Sandisk cards, FAT and FAT32 format as well. The files bootcode.bin, start.elf, kernel.img and config.txt were copied to the root (/) of the prepared SD card. After rebooting the Zero the LED turns on for a short time, sometimes it keeps blinking but there was never any HDMI output. No matter how I setup the HDMI monitor.

To me it seems there are circulating several versions of the four needed files, I have tried many without succes including files from https://github.com/fbergama/pigfx.**

from pigfx.

If possible, please try this again with the latest version 1.2.0 of PiGFX.

from pigfx.

V1.6.2 is working on Pi Zero 1.3.

from pigfx.