Colors off and not bright at feed about adrilight HOT 14 OPEN

from adrilight.

from adrilight.

adrilight-settings.zip

from adrilight.

Here is stand by mode:
https://youtu.be/WwwM72Z7kJo

Here is actual data feed to see brightnes difference and color distribution(im posting more photos as well):
https://youtu.be/3keQDS5fGYQ

from adrilight.

Photos.zip

Here is photos white different color combinations

from adrilight.

Thanks for helping and looking into it ;)

from adrilight.

it looks like it uses way to much blue in all it does but the settings say, you have not touched the white balance.

Things to check:

• Open the Preview-Tab in the settings window. Does the preview of your screen there look like the actual screen or is there already a color shift?
• Check the code you flashed on your arduino. did you change something there?
• try adjusting the white balance by reducing blue by a lot, this might be it already. the color reproduction is not that great in most led strips

regarding the brightness, i cannot really tell something is wrong actually. there is a brightness setting in the arduino code, but it affects the demo mode as well so there should not be any difference between the modes.

did you wired in more than one power input into the strips?

from adrilight.

I have 1 power adapter to power strip and data contacts to Arduino board. But if there would be any issues with power that would effect demo mode as well, right?

I did video for performance page but I don't understand how to use that page.
https://youtu.be/WmFp92zpfM8

Can you do screen or video of explaining?

Thank you

from adrilight.

The preview page looks fine.
please post the arduino code you flashed on the arduino and provide a url or photo or something, what led strip you bought.

this is sooo weird! at least after turning the white balance on blue to zero, the blue should be gone completely!

from adrilight.

Hi, is there is possiblity something wrong with Arduino library - but than im thinking would be same issue with demo mode! Demo mode colors looks awesome and correct but feed too much blue like you said!
here are my code and extra info
Photos(20).zip
.

from adrilight.

I think i have this strip:
https://www.aliexpress.com/item/32481030210.html?spm=a2g0o.9042311.0.0.27424c4dzNotgL

from adrilight.

original project was led build from this instructions: https://www.instructables.com/DIY-Ambilight-Using-Arduino-Nano/

from adrilight.

Hi, I figure out...my 2811 color led code wasn't build the same and I just swap code and now all works. Thanks you

from adrilight.

https://github.com/FastLED/FastLED/wiki/Rgb-calibration

Swap GRB to BRG and that's it!

from adrilight.