FreeRTOS component fails to reload about mcuoneclipse HOT 14 CLOSED

Hi Nick,
that's strange, never seen this. Do you have Kinetis SDK components enabled/present? Can you check (maybe disabel) component repositories? Go to Help > Preferences > Processor Expert >
Repositories and Paths and disable the ones you don't need?
Let me know if this helps.
If not, can you provide me your .pe file so I can try it on my side?
Erich

from mcuoneclipse.

The other idea:
shut down KDS, delete C:\ProgramData\Processor Expert\PECache and see if this helps?

from mcuoneclipse.

Components look like this:

The KSDK components are installed but I don't think I'm using any of them?
The KSDK part of Freertos is disabled.
I think it breaks whether it's enabled or not.
Tried deleting the PECache and disabling repositories and it didn't seem to fix it.

Should also have mentioned that I updated KDS a few days ago to the latest version.

PE file is linked below:
ProcessorExpert.txt

from mcuoneclipse.

Your screenshot is too small to read it :-(.
The Kinetis SDK components/repositories do come with a FreeRTOS component with the same name. I was thinking that there could be a naming conflict, that's why I think disabling the Kinetis SDK component repositories could make a difference.
Updating KDS should not be the problem (I have an updated version too).

from mcuoneclipse.

Tried with the SDK repo's removed.
All the SDK components went away, but doesn't seem to fix it.

If it's any help, when it's loading the components it initially shows the correct list (as above) and then the list goes away and it prints the error I mentioned.

from mcuoneclipse.

If you move the mouse over the FreeRTOS component, it shows you the repository. Is it the same as for the others (like the utility)?

from mcuoneclipse.

Looks just like yous except the repository is "My Components".
Also tried renaming the Freertos component in the SDK repositories just in case and that didn't help.

from mcuoneclipse.

Can you disable all your other repositories? Like this:

Even if you don't use SDK repositories, components from it might still be reloaded (I think)

from mcuoneclipse.

Already tried it.
Whole bunch of components went away but still doesn't load.
Does that PE file look right to you?

I think my next step might be to start a new project from scratch with just FreeRTOS in it.
See if I can track down where it goes wrong.

from mcuoneclipse.

FYI, your .pe file works for me. So I still think there must be something with your other repositories?

from mcuoneclipse.

OK.
if it works for you it must be something in the setup here.
I'll muck around with it some more.

Thanks for you help.

from mcuoneclipse.

Not sure it's any help but I get the same error from the SD card component when reloading the project.

from mcuoneclipse.

Ended up re installing KDS and PEX.
Problem went away.
Thanks for your help anyway.

from mcuoneclipse.

ok, good to hear that the problem is solved.

from mcuoneclipse.