[NF] GUI Live Preview of Geometry about pyleecan HOT 1 OPEN

For this topic I suggest to start with the slots (then the holes).

My idea would be to take advantage of the step by step design of the machine by supposing that the lamination dimensions are set. If we create a complete default machine we would set default lamination dimensions and then default slot dimensions.

For the slot default parameter, my idea would be to add a new method to the slot "set_default" that would compute (and set) the default value for each slot type. These values would be computed according to Rint and Rext of the lamination and Zs (if provided otherwise we just set a default Zs as well). Basically we would create a default slot and scale it according to the current lamination dimension.

In the GUI would would just need to call the set_default when changing the slot type (if there is no previous slot of this type).

For the matplotlib display, it can be interesting to find a way to display the schematics on the current slot (to avoid to have the schematics and the current slot in two different widget). For clarity we can imagine that the current selected widget is highlighted in the display (name in red ? remove all other parameter name ?)

Best regards,
Pierre

from pyleecan.