engahmedshabana Goto Github PK

2wd-robot-rc

This repository contains the source code and documentation for a 2WD Robot RC using Arduino. The robot is controlled through a remote control and can move forward, backward, turn left, turn right, and stop.

access-control-tinkercad

This repository contains the source code and documentation for an Access Control System implemented using an Arduino microcontroller board, a fingerprint sensor, an LCD display, a keypad, and an RFID sensor.

arduino-controlled-smart-home

This GitHub repository contains all the necessary code and resources to create a smart home system using an Arduino board, a mobile application, and Bluetooth connectivity. With this system, you can control eight different appliances in your home based on various modes or scenarios.

arduino-lcd-20x4-game-with-analog-joystick

This repository contains the source code and documentation for a game implemented on an Arduino board with an LCD 20x4 display and an analog joystick using the Wokwi simulator.

arduino-led-brightness

This project uses an Arduino board to control a LED's brightness, gradually increasing it from zero to maximum brightness and then decreasing it back to zero, in a loop. The fade amount for each step is 5, and the code consists of only one if statement.

arduino-led-control-with-switches

This project demonstrates how to control six LEDs using two three-terminal switches on an Arduino Uno. The code and circuit diagram are provided in this repository.

arduino-password

arduino-product-time-counter

This GitHub repository contains an Arduino project for counting the time required for passing a product in front of a sensor. This project can be used in various applications where it is necessary to measure the time taken by an object to traverse a specific point.

binary-counter

This repository contains a binary system counter that counts from 0 to 32 using Arduino. The counter is implemented using the Arduino IDE and can be uploaded to any Arduino board.

lcd-menu

led-click-counter

This project uses an Arduino board to control three LEDs based on the number of clicks on a push button. The LEDs will light up in a certain pattern according to the number of clicks received by the button.

millimeter-scope-device

This project is designed for students at smart technology academy, It is a simple distance meter device using an Ultrasonic sensor and seven segment to measure distance in centimeters.

motor-speed-control

This is an Arduino project that uses an ultrasonic sensor to control the speed of a motor based on the distance measured by the sensor. If the distance is less than 200 cm, the motor will start moving at 25% of its speed and the lower the distance, the higher the speed of the motor.

password-fingerprint

This repository contains the source code and documentation for an Arduino-based access control system. The system utilizes a keypad and a fingerprint sensor (R305) to provide secure access to a physical location or device.

seven-segment-using-arrays

This is an Arduino program that uses arrays to count from 0 to 9 on a seven-segment display. The program is written in C++ and can be uploaded to an Arduino board using the Arduino IDE.

switch-on-and-off-a-screen

a simple implementation of the power switch control mode in mobile phones using an Arduino board. The system allows users to turn on and off a device, such as an LED or LCD screen, by pressing a button on the Arduino.

tilt-sensor

traffic-light-system

This project is a simple traffic light system built using an Arduino board and three LEDs. The system simulates a traffic light by displaying a green light first, followed by a yellow light that flashes three times, and then a red light. This cycle repeats indefinitely.